MODEL: AQ-DM-2 FILE NAME: IB-STI-IDK2A-4, 081001.
LOCATION OF CONTROLS TM MP3/iPod Water/Dust Proof Digital Media Locker TM 2 3 4 5 6 1 7 8 9 2-MD-QA Keep Dry 10 Part Description 1 2 3 4 5 6 7 8 9 10 Digital Media Locker Knob and Protective Door Auxillary Locker Knobs ON/Off Power Button Water/Dust Protection Inner Gasket 3.
GETTING STARTED CONTENTS: Please make sure the following items are included. a) AQ-DM-2 Digital Media Locker TM b) Water/Dust Proof RF Wireless Remote Control c) Ten (10) Finishing Covers for Stainless Mounting Screws d) Five (5) iPod TM Cradles e) Ten (10) Stainless Steel Wood Screws f) Two (2) CR-2032 Batteries INSTALLATION Cable Connection 1. Plug and Play Connector: The AQ-DM-2 incorporates a 12 pin "plug and play" connector harness.
LOCATION OF CONTROLS RF LCD Wireless Remote Control EXT A MHz B Open Close I I Part Description A B C Remote Control LCD Remote Control Buttons Battery Door. C Buttons Music Mode FM Radio Mode Power Press once: Change from Operation mode to Standby mode. Press and hold: Change from Standby mode to Operation mode.
GETTING STARTED Remove the Water/Dust Proof RF Wireless Remote control from the Digital TM Media Locker . Unscrew the waterproof cap on the back of the remote control , place the CR-2032 in the RF Remote control and replace the waterproof cap. Always ensure to connect and disconnect your media player with dry hands. Always activate the on-off button when operating the Digital Media TM Locker . By doing so, your battery life will be extended.
GETTING STARTED 12 Pin Harness Cable Connection Aquatic AV recomm ends the use of a optional "plug and play" connector for best performa nce (AQ-UNH-1). This connector is not included. For detailed informa tion, please call the re-seller. If you choose not to use the "plug and play" option, you can use the wiring schema tic below. All open wire connections should be soldered, and protected against Water/Dust for best long term performa nce.
LISTENING TO PLAYERS Listening to iPod TM: TM 1. Power up the Digital Media Locker . 2. Take Plastic cover off 30 pin connector and replace when not in use. . 3. Attach your iPod TM device to the iPod TM 30 pin connector. TM 4. Secure the iPod device with the anchor straps provided. 5. Secure the digital media locker TM water/dust protective door. EXT MHz EXT MHz 6. Press and hold (POWER) on the remote control to turn it ON. The LCD will show "--" as shown on the right. 7.
LISTENING TO FM RADIO Radio Mode FM radio is only available when you are in the FM Radio Mode. To Enter FM Radio Mode: 1. Press FM (FM RADIO) on remote control to change to EXT MHz FM radio mode. If this is the first time you listen to FM radio, the frequency will be 88.1MHz as a defualt as shown on the remote LCD. To Scan or Navigate Channels: (FAST REWIND) or 1. Press channel in increments of 50kHz. (FAST FORWARD) change 2.
OTHER FEATURES External Trigger Aquatic AV understands the need for more flexible remote applications. With the Digital Media Locker, Aquatic AV has provided an independent 12V "accessory" trigger, activated by the RF Wireless Remote that provides user to activate non-iPod, MP3 related devices. This could include any 12V based devices like 12V lights or surveillance camera. EXT MHz 1. In any operational mode, press the lightning bolt (12V TRIGGER) key to activate. Press again to deactivate. 2.
iPod iPod TM TM Cradles and Replacing iPod 30pin Connectors Cradles There are 5 cradles included for docking below iPods iPod 1 iPod TM TM TM : classic 160GB; 5G 60GB, 80GB Keep Dry 2 iPod TM 4 nano 3G, 4GB, 8GB Keep Dry iPod 3 iPod TM TM TM TM touch 8GB, 16GB Keep Dry classic 80GB; 5 iPhone 5G 30GB Keep Dry Keep Dry iPod iPod 30 pin Connector Replacement TM Under harsh operation conditions, the iPod 30pin Connector may deteriorate.
SPECIFICATION Technical Specification General Power Supply Current drain when OFF Current drain in Standby Mode Remote Control Frequency : : : : 12V 5A min. <1mA <10mA 2.4GHz Remote Control Battery External Trigger IP Rating UV Remote Water/Dust Rating : : : : : 3.0V (1 pc CR3123) 12.0V, 300mA max.
FCC STATEMENT FCC ID: WBQAQPAVRFMPIP MADE IN CHINA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
