Aquana Water IoT Platform SV-1 Smart Valve User Manual Version 1.0 - November 2018 Aquana, LLC | www.aquana.com | 1-888-404-2782 (AQUA) | sales@aquana.
Version Date Author 1.0 11/01/18 Aquana Change Table of Contents Table of Contents Compliance Welcome Included hardware Aquana Account and Property Setup Account Setup Aquana Mobile App Download the App: Login to the App: Activate your Device: Install your Smart Valve Connecting the battery Plumbing the hardware Smart Valve Specifications Drawings Aquana, LLC | www.aquana.com | 1-888-404-2782 (AQUA) | sales@aquana.
Compliance Make/Model: Aquana SV-1 Smart Valve FCC ID: 2AQSE-AQSV1 IC: 24363-AQSV1 Contains FCC IDs: AU792U13A16858 (LoRaWAN), 2AHMR-ESP07S (WiFi) Contains IC IDs: 125A-0055 (LoRaWAN), 23236-ESP07S (WiFi) FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CAUTION: Any changes or modifications to any component of the Aquana SV-1 Smart Valve that is not expressly approved by Aquana could void the user’s authority to operate the equipment. Aquana, LLC | www.aquana.com | 1-888-404-2782 (AQUA) | sales@aquana.
Welcome Thank you for purchasing the Aquana SV-1 smart valve. In order to install our product you will need a qualified plumber. Please contact the Aquana support team with any questions or concerns about your installation. We’re here to help. The setup process for each Aquana Smart Valve requires 3 easy steps. 1. Create your Aquana user account and property structure. 2. Plumb your smart valve. A qualified plumber installs each Smart Valve according to the instructions in this manual. 3.
Aquana Account and Property Setup Account Setup 1. The first step is to setup your User Account on our Website. a. Goto: http://dev.aquana.com/registration b. Enter your email, full name, mobile phone number for SMS alerts, and your company name. c. Click SIGN UP button. d. The Platform will email you with a temporary password. e. Enter the temporary password and also choose a new password. f. Click “SET NEW PASSWORD”. 2. Review and accept the Aquana End User License Agreement (EULA) 3.
Activate your Device: In order to use your valve, it must be activated first. Please make sure that you’re within bluetooth range of your valve, and ideally be in the location that the valve will be installed in order to ensure that the valve can connect to your WiFi or LoRaWAN network. 1. From the main menu, choose “Activate New Devices”. 2. Then choose from the list of Activation Workflows. 3. Choose the Property & Location within your Property where you want to install your device, and tap Next. 4.
Install your Smart Valve Connecting the battery NOTE: The Aquana SV-1 comes with the battery unplugged. If your installation location is tight or difficult to access, please plug in the battery before you plumb the unit. 1. Open the lid on your smart valve 2. Plug the battery into the battery connector on the printed circuit board. This connector can only fit in one direction. Make sure that the connector is fully seated before closing the lid. Aquana, LLC | www.aquana.
3. Close and secure the lid with the four T8 torx bit screws provided. a. The SV-1 uses a compression gasket to keep out any moisture that may come in contact with the unit. In order to create the best seal and align the lid holes, you will need to apply pressure from the sides as shown. b. Compress the short white side of the lid so that it forms a firm seal and allows the lid screw holes to align with the case screw posts. c. Screw in the lid screws to a snug fit.
Plumbing the hardware NOTE: Please ensure that a manual shutoff valve is installed where the water supply enters the home or property unit, before the Aquana SV-1 smart valve. 1. The valve should be installed just downstream of the main manual shutoff valve. 2. The valve requires approximately 3.5” of “lay length” along the dimension the pipe runs, and also requires approximately a 6” radius around the pipe. Reducer fittings may also be needed, which will add additional length. 3.
Smart Valve Specifications Aquana, LLC | www.aquana.com | 1-888-404-2782 (AQUA) | sales@aquana.
Drawings Aquana, LLC | www.aquana.com | 1-888-404-2782 (AQUA) | sales@aquana.
