α712 RFID UHF Reader User Guide Ver. 0.
Copyright 2020. Aplusetechnology Co.,Ltd. All rights reserved. Apulsetech is the manufacturer of Apulsetech RFID handheld computers. This document and related software in this device are protected by international copyright laws. Any part of this document may not be reproduced, removed or used in any form by any means, without permission in writing from Apulsetech. The contents in this manual is subject to change without prior notice. Apulsetech and α712 are registered trademarks of Apulsetechnology Co.
http://www.apulsetech.com Change Date Description Ver.0.
Table of Contents Copyright Revision History 1. About this guide ............................................................................................... 6 1.1 Introduction ...........................................................................................................................6 1.2 Configuration .........................................................................................................................6 1.3 Related document and Software ..............................
. 4.3.1 Setup ............................................................................................................................13 4.3.2 Make a Connection.......................................................................................................13 Windows Connections ...................................................................................... 15 5.1 Compatible Product Models ................................................................................................
1.1 Introduction The α712 (RFID UHF Reader) is a high performance UHF reader connecting to mobile device. Optional 2D barcode scanner engine from Zebra is available to capture 1D/2D barcode data. Users are able to experience highest working performance with α712. This guide is designed for helping users to operate α712 effectively. Please read the guide carefully before using α712. 1.2 Configuration ▪ This guide provides information of the following configurations including optional features.
When requesting support, please have following information; - Serial number of the device ( On manufacturing label ) - OS, Firmware version 1.5 Safety information Symbols This guide uses the following symbols to indicate hazards and additional information. Symbol Name Description Warning Implies information that could result in serious injury to yourself or others. Caution Implies information that may result in minor or serious product damage.
▪ Please don’t use α712 under high temperature or in flammable areas (example: gas station). ▪ Please keep your α712 and accessories away from children without supervising. ▪ Please obey the relevant laws and regulations when you use your α712, and respect others lawful rights and privacy. ▪ Please obey the relevant specification of this manual when you use USB cable. Otherwise it may damage your α712 or personal computer.
2.1 Packing Contents Your α712 packing box includes the following items - α712 Device - Power adapter - Quick guide - Battery The images may differ from your actual items. To purchase additional accessories, contact your sales representative. You can download latest version of User Manual from www.apulsetech.com. 2.2 α712 Review 2.2.1 No. 1 Item 2D Imager 2.2.2 No. Top side Description Scans barcodes by emitting a red laser when you press the related button.
2.2.3 Front side 1. Description of LED Status No. 1 Item Description READY In power saving mode, LED color is Red. 2. Flourish LAMA - Smartphone holder free stick 3. Antenna for RFID - Sending and receiving tag data 2.2.4 No. Item Power key Reset Key 1 Back view Mode key Description Press and hold to boot α712 when it’s completely turn off. When α712 is stuck and no physical buttons are not working, use small objects and press RESET button shortly, then device will force to shut down.
3.1 Installing and Replacing the Battery α712 uses Lithium-ion rechargeable battery. Before removing the battery, turn off the power. Failure to do so it may cause damage to the device. When removing the battery cover, press the cover firmly and turn the latch unlock side, be careful not to damage your fingernail. 3.2 Charging the Battery When charging only α712 body with DC Adapter Using provided charging adapter (5V/3A) is highly recommended.
Remove Battery or reset ( rebooting ) 3.4 Reset ⚫ Press reset button to reset the device. ⚫ Reset button is hardware key, it works while α712 powers on. It will shut down device and running application, you may lose data which made on the running application, please back-up important data frequently and use the reset function carefully.
4.1 Compatible Product Models It is recommended to use of the mobile device with Android OS version 5.0 or later. 4.2 Demo Apps - Installing Demo Apps. Install the application on the PC and Mobile device to connect to α712 and refer to Android SDK User Guide. α712 provides Demo Apps for function test and customer application development. Demo Apps may update or change without any notice. For latest demo apps or support, please contact your regional partner or visit our website. www.apulsetech.com.
1 2 1. Run Demo app on the mobile device. 2. Press Scan button on the screen. 3 4 3. Select a searched device. 4. Control RFID or barcode scanner while USB in connected.
5.1 Compatible Product Models It is recommended to use of device with Windows10 or later version. 5.2 Connection 5.2.1 - α712 device turn on. 5.2.2 - Setup Make a Connection Run “DemoWinForm.exe” program on PC. 1 1. Setting → Remote Connection.
2 3 2. Press SEARCH button. 3 4 3.
4. Press OK button. 5 6 7 5. Select Barcode Scanner or RFID Reader. 6. Press CONNECT button. 7. Scan Barcodes or Read Tags by pressing START SCAN.
This chapter provides information to use α712 for the first time. For more specific information about settings of Demo apk and details, please refer to Android SDK User guide. 6.1 UHF Reading ⚫ Check the voice status when UHF Single reading and Multi reading. ⚫ Button on the handle can be assign as UHF Tag Scanning button. ⚫ Able to save read Tag information. ⚫ α712 will be into SLEEP mode after no Tag for a time as setting.
α712 is provided with most recently released firmware however if it’s necessary to update the OS, please contact the local partner or let us know. Backup all the data and information from your device before OS update. Your data may be erased during the update. Check the battery fully charged or at least 90% charged before update, low battery may cause improper update or device malfunction. 7.1 OS Update Please refer to OS update guide from our website. 7.
Performance Characteristics Processor Octa core 2.0GHz Operating System Android 6.0.1 Memory LPDDR 2GB RAM, eMMC 8GB Internal RFID Engine Custom module with embedded Impinj R2000 Operating Temp. -20°C~+70°C Storage Temp.
Frequency 860MHz – 960MHz Reading Range 0M ~ 40M ( Depending on Tag & Environment ) Writing Range 0M ~ 10M ( Depending on Tag & Environment ) RF output 1W ~ 4W EIRP Protocol Gen2, ISO/IEC 18000-6C Special function Anti-Collision Accessories Cradle USB Host, Ethernet, UART ( RS-232 with 3.
Trouble shooting guide is available on saparated document, you can refer to FAQ or download document from our website, www.apulsetech.