User's Manual

APTOS DESIGN LAB
Bike Guardian
ADSB001-0
PRODUCT DESCRIPTIONS
FEATURES
SPECIFICATIONS
SAFETY PRECAUTIONS
Please follow the safety precautions carefully before you use the product.
Make sure that you use the product correctly according to the procedures
described in the guide.
1. Never place the product close to equipment generating strong
electromagnetic fields.
* Exposure to strong magnetic fields may cause malfunctions.
2. Never plug or unplug the product if your hands are wet,
otherwise it will may cause electrical shock.
3. Do not drop the product to the ground to avoid malfunction.
4. Do not attempt to disassemble or alter any part of the product
that is not described in this guide.
5. Do not put heavy material on the product.
6. Do not use the product in a wet location.
* In the event that water or other liquids enter the interior, immediately
unplug the product from the computer.
* When continuing usage of the product under above situation may cause
fire or electric shock.
7. Do not place the product near a heat source or expose them to direct
flame or heat.
8. Do not place the product in damp or dusty places.
GETTING STARTED
Riding bicycle is getting popular nowadays because more and more people take global warming
and their health seriously. However, stealing bicycle also become a big problem. Bike Guardian
provide a solution not only a brake light for riding safety but burglarproof. When some one want to
steal your bicycle, the sensor in the device would detect the movement. The device of transmitter
and receiver will both triger the alarm to warn you. You can have more time to save your bicycle.
• All mode can be set by remote control
• Provide real time burglarproof alarm
• Provide warning and brake light to keep you safe in driving.
• Support Tx/Rx connectivity alarm
PRODUCT OVERVIEW
Buzzer
Lampshade
Power Switch
Screw Hole
Firming on the stand
ON OFF
BOTTOM VIEW BACK VIEW
Transmitter
Function Button
Power Switch
Buzzer
Alarm Indicator (Red)
Daytime Indicator (Blue)
Nighttime Indicator (Green)
Transmitter
Low Power Indicator (Yellow)
Receiver
Low Power Indicator (Yellow)
Battery Cover
TOP VIEW RIGHT VIEW
BOTTOM VIEW
Receiver
ONOFF
Transmitter
Receiver
Package List
Size
Power (Operation time)
Transmission Distance
Operating Temperature
Relative Humidity
Frequency
Output Power
Power Supply
Red LED
Voice
Dust & Waterproof
92mmx59mmx59mm
50hrs
(AAA battery x 3)
50m typ. (Open Space)
0°C ~ +60°C (Excluding Battery)
5% ~ 95%,
non-condensing.
ISM, 2.4GHz ~ 2.5GHz
0dBm, typ.
4.5V DC (typ.)
Brake & Alarm Indicator (5 LEDs)
125 Lux (0 cm)
100 dB
IP65
Size
Power ( Operation time)
Transmission Distance
Operating Temperature
Relative Humidity
Frequency
Output Power
Power Supply
Sensitivity
Red LED
Blue LED
Green LED
Yellow LED
Voice
Transmitter x1 Receiver x1 User manual x1
Stand x1 Screw (Small) x1 Screw (Big) x2
72mmx32mmx12mm
25hrs
(AAA battery x 1)
50m typ. (Open Space)
0°C ~ +60°C (Excluding Battery)
5% ~ 95%, non-condensing
ISM, 2.4GHz ~ 2.5GHz
0dBm, typ.
1.5VDC (typ.)
±8g for three axis
(adjustable by software)
Alarm Indicator
Daytime Indicatior
Nighttime Indicator
Low battery Indicatior
100 dB
APPLICATION
Daylight mode
1. When both burglar alarm device and remote controller are powered on, the device will enter
Daylight mode automatically.
2. In Daylight mode, the remote controller will have Blue LED lighting.
3. If user’s device is in Night mode and want to change back to Daylight mode, press the function
button until the Blue LED lights up. Then, release the function button.
4. If user press the brake of the bike when riding, the device can detect the motion and light up the
brake light.
Night mode
1. Press the function button of remote controller until Green LED lights up. Then, release the
function button. And, LEDs of burglar alarm device will be twinkling. (default state)
2. Press the button of remote controller for once, the LEDs of burglar alarm device will be twinkling
randomly.
3. If user press the brake of the bike when riding, the device can detect the motion and light up the
brake light.
Burglar Alarm Mode
1. Press and hold the function button on the remote controller until the Red LED lights up. Then,
release the function button.
2. At this point the burglar alarm device will sound twice and LEDs will flashes twice as well.
It means the product has entered the Burglar Alarm mode.
3. To enter the anti-theft mode after any move; shake or sloshing burglar alarm device, The
transmitter and receiver will both triger the buzzer and LEDs will keep flashing.
4. To release the Burglar Alarm function, press the button on the remote controller once.
Other Setting
1. In burglar mode if it exceeds the transmission coverage, the remote controller will be constant
beeping.
2. If the burglar alarm device is in low battery, the remote controller will beep and the Yellow
LED will lights up. Please change the batteries if you have the situation.
3. If the remote controller is in low battery, the Yellow LED will lights up. Please change the
battery if you have the situation.
Wireless Brake Light & Burglarproof
1. Left turn to take the lampshade off.
3. Remove main printed circuit board (PCB).
2. Left turn to remove screws.
6. Power on the device.
The LEDs will twinkle once and
buzzer will have a sound “bee”
4. Please follow the image on the battery holder
to Install 3 x AAA battery (please note the
orientation of battery).
5. Right turn to firm screws on the battery holder.
5. Right turn to firm the lampshade.
1. Setup the stand at the prop under
the seat.
2. Right turn to firm the Bike Guardian
on the stand.
3. Turn a suitable angle for firm the Bike
Guardian on the stand in case of the
shaking when riding.
4. Turn an angle to make Bike Guardian
parallel the road.
1. Take the battery cover off.
2. Install 1 x AAA battery (please note the
orientation of battery)
3. Install battery cover.
4. Power on. The Blue LED will be lighten and
buzzer will have a sound “bee”
Remote Control Device Installation and Use
Burglar Alarm Device Installation and Use
Stand Installation
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Federal Communication Commission
Interference Statement