Gtrackr GPS & Wireless Locating System ADSG001-0 User Guide
Index Description & Feature .................................................. 02 Specification ..................................................................... 03 Product Overview ........................................................... 04 Getting Started Driver Install ........................................... 05 Application Install .............................................................. 07 Bluetooth GPS Receiver for Navigation Security Tracker .........................................
01 Description & Feature Gtrackr is a data logger device that can store more than 120 hours travelling routes. Through USB port, user can use our application to merge the inside data with his photos for map application. It also can be treated as a small Bluetooth-GPS receiver and combine with handheld devices for easily navigating. Furthermore, Gtrackr utilizes Bluetooth technology to connect with mobile phones for sending SMS messages, GPS longitude And Latitude, to a specific GIS server.
02 Specification Frequency Accuracy Acquisition Open Sky Sensitivity LED Operating Temperature Storage Temperature Channels Power Bluetooth GPS Dimension Weight 03 L1, 1575.42MHz Position 2.5m CEP, Velocity 0.
03 Product Overview GPS indicator (Green) Low power indicator (Orange) Charge indicator (Red) Bluetooth indicator (Blue) Power Slide Switch Tracking Function Navigation Function Data Log Function Mini USB (Power Charge & Connect with PC) 04
04 Getting Started Driver Install 1. Insert the CD-ROM in your PC 2. The system will pop out the application for install 3.
Getting Started Please follow the steps to complete the setup.
Getting Started Application Install 1. Insert the CD-ROM in your PC 2. The system will pop out the application for install 3.
Getting Started Please follow the steps to complete the setup.
Getting Started Bluetooth GPS Receiver for Navigation 1. Slide up the switch to power on the device 2. Slide the function switch to the middle 3. Check GPS status GPS indicator is blinking (When Gtrackr 3D fix) 4.
Getting Started Connect with mobile phone MAP Bluetooth 1. When Bluetooth of Smart Phone is on, use Smart Phone to search Gtrackr 2. When you press accept the device, you need to input the pin number.
Getting Started Connect with Smartphone MAP Bluetooth 11 Check GPS and Bluetooth status: 1. The GPS & Bluetooth indicator is blinking 2. Gtrackr sends GPS Message for Smart Phone (with Map) to Navigation.
Getting Started Security Tracker STEP 1 Open the power and slide the function switch to the middle.
Getting Started 1. Please go to Device Manager to check the COM number of CP210x USB TO UART Bridge Controller 2.
Getting Started 1. Select the same COM number as privious step. 2.
Getting Started Phone Number Setup Choose and press the “Set phone numbers” button to setup two cell phone number and then press the “Accept” button. Note: These two phone numbers are for people, parents, who want to track the location of Gtrackr device.
Getting Started Time Interval Setup Choose and press the “Configure Time interval” button to setup time interval and then press the “Accept” button.
Getting Started 1. Slide up the switch to power on the device 2. Slide the function switch to the top 3.
Getting Started Connect Gtrackr with Smart Phone: After previous setting and bluetooth Link with mobile phone/smart phone, mobile phone/smart phone sends message every time interval to Web Server and mobile phones of Parents or Friends as the two phone numbers you enter.
Getting Started 4. When the child go outside and bring Gtrackr with his mobile phone, parents can login our web service to check his/her route and location.
Getting Started Travel Logger 1. Slide up the switch to power on the device 2. Slide the function switch to the bottom 3. Check GPS status GPS indicator is blinking (When Gtrackr 3D fix) 4.
Getting Started STEP 1 When user finish the trip, open the power and slide the function switch to the middle.
Getting Started 1. Please go to Device Manager to check the COM number of CP210x USB TO UART Bridge Controller 2.
Getting Started 1. Select the same COM number as privious step. 2.
Getting Started Device Setup Choose and press the “Log Configure” button to setup log interval mintime is for time setup min distance is for distance setup min speed is for maximum speed limit setup and then select the Data log “Enable” and press the “Setting” button.
Getting Started Download files 1. Click Log Read Batch and select a folder that you want to save the Gtrackr’s logger data. 2. Click Log Decompress and select the file from previous step. 3. The application will convert the file to KML format.
Getting Started 4.
05 Package List Gtrackr 27 USB Cable Stand CD-ROM User Manual
06 Safety Precaution Please follow the safety precautions carefully before you use the product. Make sure that you use the product correctly according to the procedures described in the guide. 1. Never place the product close to equipment generating strong electromagnetic fields. * Exposure to strong magnetic fields may cause malfunctions. 2. Never plug or unplug the product if your hands are wet, otherwise it will may cause electrical shock. 3. Do not drop the product to the ground to avoid malfunction. 4.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Registered tradmarks of Aptos Design Lab Inc. 2009 Aptos Design Lab Inc. All rights reserved.