Operating Instructions

5725 Innovation Drive

Troy, Michigan, 48098 USA

Operating Instructions for CT-150 OBD telematics device

Device is to be connected to the OBD port of any vehicle from model year 2006 and newer, and will connected

to the vehicle communications bus. Through connection to the vehicle communication bus, the user can monitor

vehicle health, vehicle status and other key vehicle parameters.

To install this device, simply to plug into the OBD port which is required on all vehicles. Additionally, the vehicle

OEM dealerships can provide a cable and kit to relocate the device to another location inside the vehicle. A

typical installation should look like this (Although it will vary depending on the vehicle model):

PAGE 1
5725 Innovation Drive Troy, Michigan, 48098 USA Operating Instructions for CT-150 OBD telematics device Device is to be connected to the OBD port of any vehicle from model year 2006 and newer, and will connected to the vehicle communications bus. Through connection to the vehicle communication bus, the user can monitor vehicle health, vehicle status and other key vehicle parameters. To install this device, simply to plug into the OBD port which is required on all vehicles.
PAGE 2
After installation the device must be activated on the cellular network. Activation on the cellular network will be done through an Automotive OEM dealership or an OEM help desk and can be completed remotely. The device has the following wireless communication channels: ● Cellular modem with a built-in non-replaceable SIM chip which is activated on the AT&T cellular network. This device will ONLY work on the AT&T network. ● 802.