APPTRICITY CORPORATION® LONG-RANGE BLUETOOTH TAG Manufactured By: Apptricity Corporation® Model Number: 550-130-100
APPTRICITY CORPORATION Apptricity I-Connect Long Range Bluetooth Tag _____________________________________________________________________________ Table of Contents 1. PRODUCT DESCRIPTION .............................................................................................................................................. 2 2. KEY FEATURES ............................................................................................................................................................. 2 3.
APPTRICITY CORPORATION Apptricity I-Connect Long Range Bluetooth Tag _____________________________________________________________________________ 1. PRODUCT DESCRIPTION The Apptricity Long-Range tag is intended for Asset tracking. The range of the transmitted Bluetooth signal is up to 9 miles (14.4 km) line of sight. The transmission rate can be set from a ping once per second to a ping of once per 145 hours. The Long-Range Bluetooth Tag requires one 3 Volt CR2477 Lithium battery.
APPTRICITY CORPORATION Apptricity I-Connect Long Range Bluetooth Tag _____________________________________________________________________________ 3. BATTERY REPLACEMENT The Long-Range Bluetooth tag battery replacement is demonstrated below. Step #1: Remove the 4 screws from the top of the case.
APPTRICITY CORPORATION Apptricity I-Connect Long Range Bluetooth Tag _____________________________________________________________________________ Step #2: Remove the lid with attached pcb from the case. Step #3: Remove the battery.
APPTRICITY CORPORATION Apptricity I-Connect Long Range Bluetooth Tag _____________________________________________________________________________ Step #4: Insert new battery with positive side up (very important) and negative side against the shield. Step #5: Put the top back onto the case bottom.
APPTRICITY CORPORATION Apptricity I-Connect Long Range Bluetooth Tag _____________________________________________________________________________ Step #6: Replace the four screws to attach the top to the bottom of the case.
APPTRICITY CORPORATION Apptricity I-Connect Long Range Bluetooth Tag _____________________________________________________________________________ 4. REGULATORY This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including any interference that may cause undesired operation.