User Manual

85MM
55MM
Wireless Car Charger
EMAIL US: [e-mail]
IMPORTANT ! Life-Time Warranty!
IF YOU NEED ASSISTANCE OR REPLACEMENT PARTS
Shout it out and let more people
hear your voice!
Love Your Mount?
[e-mail]
LIFE TIME WARRANTY
Our Customer Service Team is
waiting to assist you!
Please reach out to us at
Having Issues?
WE WILL RESOLVE ALL ISSUES
IN YOUR FAVOR, EVEN YEARS
AFTER YOUR PURCHASE
STEP
1
STEP
2
Unscrew the nut from the phone charger.
Put the nut through the ball joint of the
gooseneck. Push the ball joint onto the
phone cradle. Tighten the screw nut to
finish the holder installation.
Choose the flat area and clean the surface.
Press the holder and push the lock lever
down to lock the phone holder.
Plug the Type C Cable (include in package)
into the charging port on bottom of cradle.
Tear off the protective film.
Press the button behind the holder to
release the arm automatically. Put you
phone in. Squeeze the arms until it holds.
Plug the QC 3.0 adapter into the car.
Make sure it is connect power. Finish！
!
Press the button behind the
holder to release the arm.
Quick Release Button
Step 1
Step 2
Press the quick release button
on the back of the phone holder
to open both arms.
Step 3
STEP
3
STEP
4
STEP
5
STEP
6
STEP
7
STEP
8
Put in the cell phone,then
squeeze the arms until it holds.
Make sure you rest the phone flat
againest the holder completely.
*Wireless Charging Status Indicator
Metal obstruction detected
Actively charging a device
Finished the charging
Red-light Bright
Indicator Color Status
Blue-light Flickers
Blue-light Bright