Laser Projector User Manual - P lease read this manual carefully before using this product and keep it for future reference. - Please read "Important Safety Instructions" carefully before using this product.
Declaration Copyright The company reserves all rights. No part of this document may be reproduced, transmitted, translated or stored in a retrieval system or translated into any text or computer language in any form or by any means, including electronic, mechanical, magnetic, optical, chemical, handwritten or otherwise, without the prior written permission of the company. All trademarks and registered trademarks are the property of their respective owners.
Contents Declaration....................................................... 2 Operation....................................................... 19 Important Safety Instructions....................... 4 Signal Source.......................................... 19 Contents........................................................... 3 General Safety Instructions.................... 4 Safety Tips................................................. 4 Important Safety Precautions................
Important Safety Instructions General Safety Instructions Please read this manual carefully before using this product and keep it for future reference. The device shall be installed, operated and maintained by a qualified authorized technical personnel. All warnings listed on this projector and listed in this manual should be observed. Strictly observe all instructions on operations and usage. Strictly observe all local installation standards.
Important Safety Instructions Terms: Maintenance personnel: Refer to the professional personnel who may use the training and skills to avoid possible harms to themselves or others when they are in the maintenance contact area or the device in the restricted contact area has obvious dangers. Users: Refer to all persons except maintenance personnel.
Important Safety Instructions 6 Preventing personal injury To prevent personal injury and physical damage, refer to this manual and all the labels on the system before plugging the power plug into the electrical outlet, or commissioning the projector. To prevent injury, ensure that the lens and all covers are installed correctly. Before attempting to move or remove the projector, turn off the projector and unplug the power plug from the wall socket.
Important Safety Instructions Preventing fire The design and manufacture of the projector conforms to the most stringent safety requirements. Putting the flammable material near the projector may cause the material to ignite itself, causing a fire. Once fire occurs, be sure to use sand, CO2 or dry powder fire extinguishers. Please do not use water to extinguish a fire when an electrical fire occurs.
Environmental Protection Instructions Harmful Substances Declaration Name and Content of Hazardous Substances in the Product Parts Name Pb Hg Cadmium (Cd) Light source/light machine ○ ○ ○ Cables ○ ○ ○ PCBA assembly Power assembly Structure assembly Lens Remote control Other metal pieces × × ○ ○ ○ × ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Harmful Substances Hexavalent Polybrominated Polybrominated Cr (VI) PBB PBDE chromium ○ ○ ○ ○ ○ ○ ○ ○ biphenyls ○ ○ ○ ○ ○ ○ ○ ○ diphenyl et
Laser Safety Label Sticking Area of Laser Safety Label Warranty void if damaged Nameplate area Meaning of Laser Safety Label Caution - Do not stare into the beam. - Ne regardez pas dans le faisceau.
Overview Product Overview Thank you for choosing our projector. This product is a compact high brightness laser projector based on DLP display technology. With the new-generation APLD laser source technology, it features excellent color performance. This product is delivered with all the items shown below. Check the packaging to ensure that the items are complete. If any items are missing, please contact the dealer immediately.
Overview Projector Appearance 1 Projection lens 3 HDMI1 input port 2 1 4 5 6 7 8 9 HDBaseT port HDMI2 input port USB port Kensington anti-theft lock slot SYNC OUT port S/PDIF output port Power button (power-on/off) Power on/off the projector. 10 Menu buttons 2 3 4 5 6 7 8 9 10 11 12 13 14 Access the screen display menu, exit the menu, and save the settings. 11 Back Go back to the menu at the previous level.
Overview Terminal Ports and Connections 家庭音响系统 Home audio system 电脑/机顶盒/DVD播放机 Computer, set-top box, and DVD player （具有HDMI输出端子的视听设备） (Audio devices with digital （具有数位声音讯号输 audio signal input terminals) 入端子的音响设备） (Audiovisual devices with HDMI output terminals) DVD播放器/机顶盒、 DVD player, set-top box, and HDTV receiver HDTV接收器 USB storage device USB储存设备 1 2 IR 3D OUT 3 HDMI 1 3 HDMI 2 5 4 USB S/PDIF HDBaseT OUT RS232 6 连接至插座 Connecting to the socket 7 中控设备 Control device 1 HDBaseT port 3
Overview Remote Control 1 2 4 3 4 5 6 7 8 9 10 13
Overview 1. Power supply In standby mode, if you press this key, the device is powered on; in power-on mode, if you press this key, the screen prompts for the power-off operation. Press the power button to shut down the device. 2. Signal source If you press this key, you can select the projector input signal source. 3. Electric zoom If you press this key, an electric zoom prompt box is displayed. You can press the Left or Right arrow key to adjust the focus. 4.
Overview Replacing the Battery of the Remote Control To open the battery cover, turn the remote control with the back facing up, and pull the battery cover as indicated by the arrowhead in the figure to remove the battery cover. Remove the old battery (if necessary) and install two new AAA alkaline dry batteries at the bottom of the battery compartment according to the polarity instructions. The anode of the battery towards the (+) direction, and the cathode towards the (-) direction.
Installation Installation Methods The projector supports four projection modes. Please install the projector according to the installation position. Shut down the projector before changing the projection mode and then start up the projector after changing the projection mode. The projection mode can be preset to desktop-mounted front projection. You can also select another projection mode from the menu.
Installation Projection Distance Determine the projection distance according to the model differences and screen dimensions as specified in the following table.
Installation Installation Procedure 1 Ensure that all items are complete based on the packaging diagram. 2 Check whether all installation requirements are satisfied, such as the environmental conditions of the installation area, installation methods, projection distance, and safety regulation compliance of the electrical connection to the power grid. 3 It is prohibited to place the terminal surface of the projector on a table or a platform such as the ground when handling the projector.
Operation Main Page After the device is energized, the main page is displayed. The upper right corner displays the icon of the connected external storage device (the icon of external storage device such as USB flash drive is displayed after connected), network connection icon, Bluetooth icon, and current time. The main page displays the signal source icon, system settings icon, multiscreen icon, app icon, electric zoom icon, file management icon, office file icon and message icon.
Operation Apps After you click the Apps icon, all apps preset in the system, including the apps installed by the user, are displayed. File Explorer You can access the connected external storage devices on the File Explorer page, and access the images, music, videos, and files saved on the external storage devices. 1. After the external storage device is connected, the File Explorer page displays the name of the currently connected device.
Operation 2. After you click the name of the external storage device, you can see the corresponding videos, music, files, images, APK and other content. 3. Select an image to browser. You can also press the menu button to perform the Delete, Rotate, Slide Show, and View Details operations.
Operation 4. When playing the music, you can switch to the previous/next song, pause the music, and switch the playback modes. 5. When playing the video, you can switch to the previous/next video, pause the video, or switch the videos.
Operation 6. If you press the menu button, you can set Image Parameter, Brightness, Video Ratio, Sound Track, Subtitle, and Playback Settings. The image parameters are the same as those in Display Settings > Image Parameters. Brightness Mode: Standard, Demo, and Eco Video Ratio: Adaptive Screen and Full Screen Sound Track: You can select a sound track. Subtitle: You can select an add-on subtitle. The following figure shows the Playback Settings.
Operation 7. Press the menu button of HDMI to display the OSD menu. Function HDMI OSD menu Attribute Value Image Parameter Settings > Display Settings > Image Parameters 3D Settings 3D Settings in OSD of the played video Brightness HDMI2.
Operation System Click the System icon. The options on this page include Network, Bluetooth, Display, General, Sound, and Signal Source. I. Network Select Network and click the OK button to enter the network settings page.
Operation (1) Wi-Fi On the Wi-Fi page, click the connected Wi-Fi network to set the static IP address. (2) Ethernet After the Ethernet is successfully connected, click the Ethernet icon to set the static IP address.
Operation (3) Check network Click the Check network icon to check the connected network and ensure that the network is successfully connected. II. Bluetooth If Bluetooth is set to On, audio can be output to the connected device through Bluetooth. You can enable Search for Devices to search for a device. The search result lists the found Bluetooth devices.
Operation III. Display Settings Select Display Settings and click the OK button to enter the display settings page. The options on this page include Brightness Mode, Image Parameters, Keystone Correction, Lens Focus, Projection Mode, Contrast Enhancement, High Altitude Mode, Test Picture, and Solid Color Picture. (1) Brightness Mode In the Brightness Mode option, you can set the brightness of the projected image to Standard, Demo, or Eco.
Operation Mode Mode Brightness Contrast Saturation Sharpness Tone Color Temperature HDR Image Parameters Menu Attribute value Standard, Cinema, Color, DICOM, and Custom 0-100 0-100 0-100 0-100 0-100 Standard, Warm, Cool, and Custom Auto, Off, and On (3) Keystone Correction You can correct the device in Keystone Correction. The options include Vertical & Horizontal, Eight Point, and Reset.
Operation (4) Lens Focus The options include Shift, Center, Zoom, and Focus. (5) Projection Mode You can set the projection mode to Desktop front, Desktop rear, Ceiling front, Ceiling rear based on the device installation mode.
Operation (6) Dynamic Contrast When Dynamic Contrast is set to On, it can improve the real-time contrast of the display screen and improve the display effect. (7) High Altitude Mode When using the projector in a high-altitude area, enable the high altitude mode.
Operation (8) Test Picture You can display the test pattern to check the display performance of the projector. (9) Solid Color Picture You can view the monochrome display effect of the projector in Solid Color Picture.
Operation IV. General The options include System Version, Update from USB Drive, Device Name, AppoCast Device Name, Network Control, Input Method, Lock Screen, Sleep, Time Form, Time Zone Selection, Language, Unknown Sources, About, and Restore to Factory Defaults. (1) System Version The system supports online update. Upon detecting a new system version, the system prompts for online update. If the current version is the latest, a prompt is displayed.
Operation (2) Update from USB Drive The system supports local update from the USB drive. You can place the latest system version in the root directory of the USB drive for local update.
Operation (3) Device Name You can view the name of the current device. (4) AppoCast Device Name You can set the AppoCast device name.
Operation (5) Network Control After Network Control is enabled, you can use the network control functions. (6) Input Method You can view the current input method. If another input method is downloaded, select the desired input method as the default input method on this page.
Operation (7) Lock Screen The screensaver time can be set to Close, 4 min, 8 min, and 12 min. (8) Sleep The options include Close, 30 min, or 1 hour. If the device is not operated within 30 min or 1 hour, the system automatically turns off the screen.
Operation (9) Time Form The options include 12-hour Format and 24-hour Format. (10) Time Zone Selection You can set the time zone based on the current location.
Operation (11) Language The language include Chinese Simplified, Chinese Traditional, and English. (12) Unknown Sources To protect the security of user data, the system does not allow the installation of APKs from unknown sources by default. If you need to install a third-party APK, confirm its security, and then manually enable this option before installation.
Operation (13) About The options include Product SN, Projector Use Time, System Version Information, Disk Information, and Network Information.
Operation (14) Restore to Factory Defaults You can restore the device to factory defaults. Before the restoration, please back up your personal data to avoid unnecessary losses. V. Sound Select Sound and click the OK button to enter the sound settings page. The options include Button Tone and Audio Output. (1) Button Tone You can turn on or off the button tone.
Operation (2) Audio Output You can set the audio output to Speaker and SPDIF according to actual situations. VI. Signal Source After the DVD player, set-top box, or laptop computer is connected to the HDMI port, you can click the HDMI option corresponding to the Signal Source icon to enter the Signal Source page. The options include HDMI1, HDMI2, and HDBaseT.
Maintenance Projector Maintenance ■ Cleaning the lens Clean the lens as below when the lens surface is stained or dusty. Method 1: Use a compressed air tank to remove dust. Method 2: Fold the cotton paper and dip it with a small amount of absolute ethyl alcohol. Gently rotate the surface of the lens clockwise to wipe it clean with the cotton paper as shown in the figure below: Fold the cotton paper into triangle - Rotate clockwise to wipe Caution Please do not wipe the lens using other methods.
Troubleshooting Failure Symptoms Unable to power on No image Fuzzy image Deformed image Low brightness Remote control problem Uncontrollable serial port or network port 44 Causes Solutions The indicator light does not light Replace the power cable and use the correct supply voltage up Read the flashing light messages The indicator light flashes and troubleshoot accordingly Contact customer service for The indicator light is always on troubleshooting Wrong signal input source is Select the correct
Product Specification Items Projection display Resolution Specification Parameters DLP 3840×2160 Light Source Type Laser source Lens projection ratio 1.52-2.45 Projection dimension 50-300'' Light source technology Zoom magnification Lens adjustment ALPD® 1.
Appendix: Control port The interface board of the projector provides a RS232 serial port and a LAN cable port, through which you can control the projector on the external central control device. Serial port (Computer) (Laser projector) RS232 connection diagram The projector is connected using the DB9 female connector. One end of the straight-through cable connected to the projector is DB9 male connector, and the other end is DB9 female connector.
Appendix:Control port Reference Command List Function Power-on/ off Turning on/ off the laser Switching signal sources Volume Specific function Power-on Power-off Querying the power-on/off status 41 54 2B 53 79 73 74 65 6D 3F 0D Turning off the laser 41 54 2B 4C 69 67 68 74 53 6F 75 72 63 65 3D 4F 66 66 0D Main Page 41 54 2B 53 69 67 6E 61 6C 43 68 61 6E 6E 65 6C 3D 4E 6F 6E 65 3A 30 0D Querying the laser status HDMI1 HDMI2 HDBaseT Query Setting the volume 41 54 2B 4C 69 67 68 74 53 6F 75 72
Appendix:Control port Reference Command List Function Specific function Native 4:3 41 54 2B 41 73 70 65 63 74 52 61 74 69 6F 3D 34 5F 33 0D Fill Video ratio 16:6 16:9 16:10 Query Shift to left Lens shift Shift to right Shift to up Shift to down Center the lens Lens zooming Lens focusing Information acquisition Hexadecimal instructions 41 54 2B 41 73 70 65 63 74 52 61 74 69 6F 3D 4E 61 74 69 76 65 0D Vertical center Horizontal center 41 54 2B 41 73 70 65 63 74 52 61 74 69 6F 3D 46 69 6C 6
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
