MPR-1510AR 2.6h -1- 1/18/2007 SENTINEL-SENSE MPR-1510A-RM 2.
MPR-1510AR 2.6h -2- 1/18/2007 COPYRIGHT ACKNOWLEDGEMENTS The contents of this document are the property of Applied Wireless Identifications Group, Inc. (AWID) and are copyrighted. All rights reserved. Any reproduction, in whole or in part, is strictly prohibited. For additional copies of this document please contact: AWID 18300 Sutter Blvd Morgan Hill, CA 95037 http://www.AWID.
MPR-1510AR 2.6h -3- 1/18/2007 This device has been designed to operate with the antennas listed below, and having a maximum gain of -8 dBi. Antennas not included in this list or having a gain greater than -8 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
MPR-1510AR 2.6h -4- 1/18/2007 Table of Contents 1 INTRODUCTION.......................................................................................................5 1.1 2 SPECIFICATIONS ....................................................................................................6 2.1 2.2 2.3 3 Channel Frequency Table..................................................................................6 Connector Pin Assignment.....................................................................
MPR-1510AR 2.6h 1 -5- 1/18/2007 INTRODUCTION AWID's Sentinel-Sense MPR-1510A-RM Rev 2.6 h (MPR-1510AR 2.6h or simply 2.6h) is a long-range (12 to 15 feet) Radio Frequency IDentification (RFID) reader module with RS-232 I/O interface that works with most leading passive UHF passive tags. The reader module comes with a unique combination of long read range, small size, and low power consumption.
MPR-1510AR 2.6h 2 -6- 1/18/2007 SPECIFICATIONS Input voltage Input current Protocol language +7.0 VDC to +15 VDC 1.0 A (7.0 V) to 0.40 A (15 V) typical ISO Type B, EPC Class 1 Gen 1 & 2, EPC V1.19 Rev.2 Depends on type & size of labels used +18.5 dBm max 902.75-927.25 MHz 902.75-927.25 MHz (Amplitude Modulated) 50 Channels 500 kHz Pseudo random -30° C to +65° C (-22° F to 149° F) RS-232 DB-9 connector 3”x5”x0.
MPR-1510AR 2.6h 2.3 -7- 1/18/2007 MEASURING READ DISTANCE Make sure you know the tag types. For certain readers and tags, user must also be mindful of the tag’s orientation and the reader’s antenna orientation, what mounting surface the tags are designed for and how the tags are supposed to be mounted. Any departure from its intended purpose will drastically affect the reader’s ability to energize the tag and its read range.
MPR-1510AR 2.6h 3 -8- 1/18/2007 INSTALLATION & OPERATION GUIDELINES For ease of explanation, MPR reader in this section refers to an RFID device that consists of 2.6h and a high performance circular polarized antenna inside a splash proof, UV stabilized housing case. 3.1 GENERAL WIRING REQUIREMENTS All the MPR reader wiring should be continuously shielded.
MPR-1510AR 2.6h 4 -9- 1/18/2007 INSTALLATION PROCEDURE This section provides installation and operation information for 2.6h reader modules. 4.1 PARTS LIST Verify that all items listed below are present before starting the installation. o Sentinel-Sense MPR-1510RM-V2.6H o Documentation and command demo program CD 4.2 Qty=1 Qty=1 PREPARATION FOR INSTALLATION Familiarize yourself with the connectors and pin out assignment of each I/O connectors. 4.2.
MPR-1510AR 2.6h 5 5.1 - 10 - 1/18/2007 SOFTWARE PROGRAMMING AND SYSTEM OPERATION NOTES SYSTEM OPERATION 5.1.1 Running a Custom Software Application or the AWID Demo Program If AWID Demo Program is not used, it is expected user will launch a Custom Software Application developed using the MPR Serial Communication Protocol to issue commands to the MPR reader/module as specified. 5.1.
MPR-1510AR 2.6h - 11 - 1/18/2007 If you are using the AWID RFID demonstration software application which is .NET based with easy-to-follow GUI operations, simply select the COM port for which the 2.6h is configured then click “Connect” should get you started.