PCB-915RM-SD -1- 1/22/2015 SENTINEL-SENSE PCB-915RM-SD Installation & Operation Manual-041491
PCB-915RM-SD -2- 1/22/2015 COPYRIGHT ACKNOWLEDGEMENTS The contents of this document are the property of Applied Wireless Identifications Group, Inc. (AWID) and are copyrighted. All rights reserved. Any reproduction, in whole or in part, is strictly prohibited. For additional copies of this document please contact: AWID 18300 Sutter Blvd Morgan Hill, CA 95037 http://www.AWID.
PCB-915RM-SD -3- 1/22/2015 This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
PCB-915RM-SD -4- 1/22/2015 I NDUSTRY C ANADA COMPLIANCE This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
PCB-915RM-SD -5- 1/22/2015 IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization.
PCB-915RM-SD -6- 1/22/2015 Table of Contents REVISION HISTORY .......................................................................................................7 1 INTRODUCTION.......................................................................................................8 1.1 2 Special Features ................................................................................................ 8 SPECIFICATIONS ..................................................................................
PCB-915RM-SD -7- 1/22/2015 REVISION HISTORY Version No. 1.0 1.
PCB-915RM-SD 1 -8- 1/22/2015 INTRODUCTION AWID's Sentinel-Sense PCB-915RM-SD is a Radio Frequency IDentification (RFID) reader module capable of working with most leading passive UHF passive tags. The reader module comes with a unique combination dual antenna ports, small size, and low power consumption. Its primary functions are in asset management and tracking, and fleet management, i.e., embedded applications for PoS, printers and other portable devices widely used in these markets.
PCB-915RM-SD -9- 2 SPECIFICATIONS Input voltage Input current Protocol language Read range RF connectors Output power Transmit frequency Receiver frequency Hopping channels Channel spacing Hopping sequence Operating temperature range Output data formats Interface Connector Dimension 1/22/2015 +4.0 ~ +5.0 VDC 150 mA EPC Class 1 Gen 2 3 ~ 6 inch. (8 ~ 15 cm) antenna and tag dependent 2xU.FL (UMC) SWR<1.2 @50OHMs +20 dBm max 902.60-927.40 MHz 902.60-927.
PCB-915RM-SD 2.2 - 10 - 1/22/2015 CONNECTOR PIN ASSIGNMENT Note: ENB pulled high to enable module. Tied to power for Always-On applications. 2.
