Time Capsule Setup Guide
Contents 5 7 8 9 10 Chapter 1: Getting Started About Your Time Capsule About the AirPort Software What You Need to Get Started The Time Capsule Status Light 13 14 17 19 19 20 21 22 Chapter 2: Setting Up Your Time Capsule Using your Time Capsule to Create your Wireless Network Using AirPort Utility Creating a New Wireless Network Configuring and Sharing Internet Access Allowing Wireless Clients to Access Your Network Setting Advanced Options Using Time Machine with Your Time Capsule 25 25 25 26 27 Chapt
28 29 29 30 If Your Printer Isn’t Responding Updating AirPort Software Time Capsule Placement Considerations Items That Can Cause Interference with AirPort 31 Chapter 4: Learning More, Service, and Support 33 Appendix: Time Capsule Specifications and Safety Guidelines 4 Contents
1 Getting Started 1 Congratulations on purchasing your Time Capsule. Read this guide to get started. The new Time Capsule offers you the simplicity of fully automated backup for your Wi-Fi network. Using the Time Machine application in Mac OS X Leopard, it’s easy and automatic to back up all the computers on your network to a single Time Capsule. The Time Capsule is also a fully featured AirPort Extreme Base Station that provides simultaneous dual-band wireless networking.
With your Time Capsule, you can: Â Use the Time Machine application in Mac OS X Leopard to back up all the computers on your wireless network, as well as computers connected to your Time Capsule using Ethernet. Â Create a password-protected wireless home network, and then connect to the Internet and share the connection with other computers and Wi-Fi devices, such as iPhone, iPod touch, and Apple TV. You can also share files between computers connected to the network.
About Your Time Capsule Your Time Capsule has five ports on the back:  One 10/100/1000Base-T Gigabit Ethernet Wide Area Network (WAN) port for connecting a DSL or cable modem, or for connecting to an existing Ethernet network  Three 10/100/1000Base-T Gigabit Ethernet Local Area Network (LAN) ports for connecting Ethernet devices, such as printers or computers, or for connecting to an existing Ethernet network  One USB port for connecting a compatible USB printer, hard drive, or hub for connecting several
The reset button next to the ports is used for troubleshooting your Time Capsule. The status light on the front shows the current status. About the AirPort Software Your Time Capsule works with AirPort Utility, included on the Time Capsule CD. Install AirPort Utility and follow the instructions on the following pages to set up your Time Capsule and your AirPort wireless network. Note: You must use AirPort Utility v5.4 to set up your Time Capsule.
What You Need to Get Started To use your Time Capsule, you need a wireless-enabled computer that’s compliant with IEEE 802.11a, 802.11b, or 802.11g standards, or with an IEEE 802.11n draft specification. To set up your Time Capsule, your computer must meet the requirements listed below. Note: To use your Time Capsule with Time Machine in Mac OS X Leopard, you need to use Mac OS X v10.5.2 or later.
 Connect a USB cable connected from the USB (d) port on your Time Capsule to a compatible USB printer (if you will print to a USB printer), a hard disk, or a hub.  Connect an Ethernet cable from any Ethernet device to the Ethernet LAN (G) ports. After you’ve connected the cables for all the devices you plan to use, connect the power cord to the power port and plug your Time Capsule into a power outlet. There is no power switch. Important: Use only the power cord that came with your Time Capsule.
Light Status/description Flashing amber Your Time Capsule can’t establish a connection to the network or the Internet, or is encountering a problem. Make sure you have installed AirPort Utility and use it to get information about what might cause the status light to flash amber. See “If Your Time Capsule Status Light Flashes Amber” on page 27. Solid green Your Time Capsule is on and working properly.
2 Setting Up Your Time Capsule 2 This chapter provides information and instructions for connecting your Time Capsule to the Internet, and using AirPort Utility to set it up to create or join a wireless network. This chapter provides an overview of connecting your Time Capsule to the Internet, and using the setup assistant in AirPort Utility to set up your network and other features of your Time Capsule.
Using your Time Capsule to Create your Wireless Network When you set up your Time Capsule to provide network and Internet access, Macintosh computers with AirPort or AirPort Extreme Cards, and 802.11a, 802.11b, 802.11g, and IEEE 802.11n draft specification wireless-equipped computers, and other Wi-Fi devices can access the wireless AirPort network to share files, play games, and use Internet applications like web browsers and email applications.
Using Time Capsule to create a wireless network Time Capsule Shared printer to USB ports < Internet WAN port DSL or cable modem to Internet To set it up: 1 Connect your DSL or cable modem to your Time Capsule using the Ethernet WAN (<) port.
2 If you plan to share a USB printer on the network, connect it to the Time Capsule USB (d) port or to a USB hub, using a USB cable. 3 Open AirPort Utility (located in the /Applications/Utilities/ on a computer using Mac OS X, and in Start > All Programs > AirPort on a computer using Windows), select your Time Capsule, and then click Continue. 4 Follow the onscreen instructions to create a new network. To print from a computer using Mac OS X v10.5: 1 Choose Apple > System Preferences and click Print & Fax.
Wireless computers and computers connected to the Ethernet ports can also communicate with each other through your Time Capsule. Using AirPort Utility To set up and configure your Time Capsule, use the setup assistant in AirPort Utility. AirPort Utility is installed on your computer when you install the software from the Time Capsule CD. On a Macintosh computer using Mac OS X v10.4 or later: 1 Open AirPort Utility, located in /Applications/Utilities/. 2 Select your Time Capsule and click Continue.
3 Follow the onscreen instructions to set up your Time Capsule and your wireless network. The AirPort Utility setup assistant asks you questions about the type of network you want to use and the services you want to set up, and helps you enter the appropriate settings. If you’re using your Time Capsule to connect to the Internet, you need a broadband (DSL or cable modem) account with an Internet service provider (ISP), or a connection to the Internet using an existing Ethernet network.
Creating a New Wireless Network You can use the AirPort Utility setup assistant to create a new wireless network. The setup assistant guides you through the steps necessary to name your network, protect your network with a password, and set other options. If you plan to share a USB printer or USB hard disk on your network: 1 Connect the printer or hard disk to the Time Capsule USB (d) port.
Use the AirPort Utility setup assistant to enter your ISP settings and configure how your Time Capsule shares the settings with other computers. 1 Open AirPort Utility, located in /Applications/Utilities/ on a computer using Mac OS X, or in Start > All Programs > AirPort on a computer using Windows XP. 2 Select your Time Capsule and click Continue.
To set advanced options: 1 Open AirPort Utility, located in /Applications/Utilities/ on a Macintosh, and in Start > All Programs > AirPort on a computer using Windows XP. 2 If there’s more than one base station in the list, select the one you want to configure. If you don’t see the base station you want to configure, click Rescan to scan for available base stations, then select the base station you want.
When you allow a client access to your network, the client's name and wireless MAC address (or AirPort ID) are stored in the access control list of AirPort Utility until you remove the client from the list. You can also provide 24 hours of access, after which time the client will no longer be able to access your network. When you give a client access to your wireless network, the client doesn’t need to enter the network password.
Using Time Machine with Your Time Capsule The Time Machine application in Mac OS X Leopard lets you back up everything on your computer, including your photos, music, movies, and documents. After you set up Time Machine, it automatically backs up your computer on a regular basis. If you’re using Mac OS X Leopard v10.5.2 or later, the first time you connect to your Time Capsule, Time Machine asks if you’d like to use it to back up your files.
Time Capsule is a great wireless backup solution for portables. Since the first backup can take some time, plug your portable into a power adapter—this conserves battery power and guarantees that backups won’t be interrupted. Also, for the best wireless performance, place your portable in the same room as Time Capsule. If you shut down your Mac or put it to sleep during a backup, Time Machine stops the backup and then continues from where it left off once your Mac starts up again..
3 Tips and Troubleshooting 3 You can quickly solve most problems with your Time Capsule by following the advice in this chapter. If You Can’t Connect to the Internet  Try connecting to the Internet directly from your computer. If you can’t connect, check to make sure your network settings are correct. If they appear to be correct and you still can’t connect, contact your ISP.  Make sure you’re connecting to the correct wireless network.
 On a Macintosh, use the AirPort status menu in the menu bar to select the network created by your Time Capsule (the network name doesn’t change).  On a computer using Windows XP, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. 3 Open AirPort Utility (in /Applications/Utilities/ on a Macintosh, and in Start > All Programs > AirPort on a computer using Windows XP).
To return your Time Capsule to the factory settings: m Use something pointed to press and hold the reset button until the status light flashes quickly (about 5 seconds). Your Time Capsule resets with the following settings: Â Your Time Capsule receives its IP address using DHCP. Â The network name is reset to Apple Network XXXXXX (where XXXXXX is replaced with the last six digits of the AirPort ID). Â The Time Capsule password is reset to public.
For more information about why the light is flashing, open AirPort Utility, select your Time Capsule, and then choose Manual Setup from the Base Station menu. Click Base Station Status to display information about the flashing light. You can also select “Monitor base station for problems” in AirPort preferences. If the base station has a problem, AirPort Utility opens and walks you through solving the problem.
 Select the printer and click Add. On a computer using Windows XP:  Open “Printers and Faxes” from the Start menu.  Select the printer. If the printer isn’t in the list, click Add Printer and then follow the onscreen instructions. 4 Turn the printer off, wait a few seconds, and then turn it back on. Updating AirPort Software Apple periodically updates AirPort software. It is recommended that you update your Time Capsule to use the latest software.
 Avoid placing your Time Capsule in areas surrounded by metal surfaces on three or more sides.  If you place your Time Capsule in an entertainment center with your stereo equipment, avoid surrounding your Time Capsule with audio, video, or power cables. Place your Time Capsule so that the cables are to one side. Maintain as much space as possible between your Time Capsule and the cables.  Try to place your Time Capsule at least 25 feet from any microwave oven, 2.
4 Learning More, Service, and Support 4 You can find more information about using your Time Capsule on the web and in onscreen help. Online Resources For the latest information about the Time Capsule, go to www.apple.com/airport. To register your Time Capsule (if you didn’t do it when you installed the software on the Time Capsule CD), go to www.apple.com/register. For AirPort support information, forums with product-specific information and feedback, and the latest Apple software downloads, go to www.
Onscreen Help m To learn more about using AirPort Utility with your Time Capsule, open AirPort Utility and choose Help > AirPort Utility Help. Obtaining Warranty Service If your Time Capsule appears to be damaged or doesn’t function properly, please follow the advice in this booklet, the onscreen help, and the online resources. If your Time Capsule still doesn’t function, go to www.apple.com/support for information about getting warranty service.
Appendix Time Capsule Specifications and Safety Guidelines Time Capsule Specifications  Frequency Band: 2.4 and 5 GHz  Radio Output Power: Up to 23 dBm (nominal)  Standards: 802.11 DSSS 1 and 2 Mbps standard, 802.11a, 802.11b, 802.11g specifications, and a draft 802.11n specification Interfaces  1 RJ-45 10/100/1000Base-T Gigabit Ethernet WAN (<)  3 RJ-45 10/100/1000Base-T Gigabit Ethernet LAN (G)  Universal Serial Bus (USB d) 2.0  802.
Size and Weight  Length: 7.75 inches (197.0 mm)  Width: 7.75 inches (197.0 mm)  Height: 1.43 inches (36.33 mm)  Weight: 3.5 pounds (1.6 kilograms) Hardware Media Access Control (MAC) Addresses The Time Capsule has two hardware addresses printed on the bottom of the case:  AirPort ID: The address used to identify the Time Capsule on a wireless network.  Ethernet ID: You may need to provide this address to your ISP to connect your Time Capsule to the Internet.
About Operating and Storage Temperatures  When you are using your Time Capsule, it is normal for the case to get warm. The Time Capsule case functions as a cooling surface that transfers heat from inside the unit to the cooler air outside. Avoid Wet Locations WARNING: To reduce the chance of shock or injury, do not use your Time Capsule in or near water or wet locations.  Keep your Time Capsule away from sources of liquid, such as drinks, washbasins, bathtubs, shower stalls, and so on.
Regulatory Compliance Information Wireless Radio Use This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range to reduce the potential for harmful interference to cochannel Mobile Satellite systems. Cet appareil doit être utilisé à l’intérieur. Exposure to Radio Frequency Energy The radiated output power of this device is well below the FCC and EU radio frequency exposure limits.
This product was tested for FCC compliance under conditions that included the use of Apple peripheral devices and Apple shielded cables and connectors between system components. It is important that you use Apple peripheral devices and shielded cables and connectors between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices.
Taiwan: Taiwan Warning Statements Singapore Wireless Certification Korea Warning Statements © 2008 Apple Inc. All rights reserved. Apple, the Apple logo, AirPort, AirPort Express, AirPort Extreme, Bonjour, Macintosh, and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. Apple TV, Finder, iPhone, Leopard, and Time Capsule are trademarks of Apple Inc. Other product and company names mentioned herein may be trademarks of their respective companies.
www.apple.com/airport www.apple.