Appion Inc. Phone: 303-937-1580 Fax: 1599 2800 South Tejon St. Englewood, CO 80110 USA www.AppionTools.com Bluetooth Low Energy BLE 4.
Appion Inc. Phone: 303-937-1580 Fax: 1599 2800 South Tejon St. Englewood, CO 80110 USA www.AppionTools.com Description LR2188/LR2188-uFL BLE module houses the Nordic nRF52832 SoC with an on-board chip or external antenna tuning for great performance and low power consumption. LR2188/LR2188-uFL offers all Bluetooth low energy features: radio, stack, profiles and application space for customer applications, so no external processor is needed.
Appion Inc. Phone: 303-937-1580 Fax: 1599 2800 South Tejon St. Englewood, CO 80110 USA www.AppionTools.com The (Family model LR2188/LR2188-uFL) two models of Main Board share the same PCB layout. The only difference is the LR2188 uses a SMT Chip Antenna whereas the LR2188-uFL has a u.FL connector to attached to an external antenna. LR2188 uses a SMT Chip Antenna LR2188-uFL has a u.FL connector for external antenna use.
Appion Inc. Phone: 303-937-1580 Fax: 1599 2800 South Tejon St. Englewood, CO 80110 USA www.AppionTools.com Federal Communication Commission Interference Statement This equipment was tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appion Inc. Phone: 303-937-1580 Fax: 1599 2800 South Tejon St. Englewood, CO 80110 USA www.AppionTools.com Industry Canada Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference; and This device must accept any interference, including interference that may cause undesired operation of the device.
Appion Inc. Phone: 303-937-1580 Fax: 1599 2800 South Tejon St. Englewood, CO 80110 USA www.AppionTools.com Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.