Indala RFID Module Installation Manual Series 500 Reader Installation Version 1.00 Last Revision: 6/9/2009 Copyright 2009 API Healthcare Corporation.
Purpose This document describes the installation process of the Indala RFID Module in the Series 500 Reader. This module is an option that may be purchased by the customer. NOTICE: Installation of this module may only be made by qualified API employees. This is not a field upgrade, and must be done at the API factory. FCC Notice FCC ID: W7N-PROXIN01 Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Figure 1. 2. Carefully pull the plastic spacer off the header at the end of the board, leaving the pins intact per Figure 2. Figure 2. 3. Cut pins all the pins except 1, 3, 4, & 5 flush with the circuit board. 4. Tin the remaining pins with solder. 5. Solder the wires to the Indala header pins. Gently tug on each wire to ensure a strong mechanical joint. Ensure there are no shorts between wires. Indala Pin 1 5 3 4 Wire Color Red Black Yellow Green 6.
Figure 3. 7. Place the assembly in the case as shown in Figure 4. Figure 4. 8. Remove the paper covering the adhesive on the stand offs. Place the TA-500 board in the case. Align the TA-500 board so the mounting holes line up with the 3 case mounting bosses. Press gently to make contact with the Indala board stand offs. 9. Remove the TA-500 circuit board. The Indala should be mounted on the board. Press firmly on the Indala board to ensure good adhesion between the two boards. 10.
Figure 5. 11. Mount the Series 500 Main PCB in the case in the normal manner. 12. Complete final assembly of the unit. Testing the Indala RFID Module 1. Apply power and wait for the unit to boot up. 2. Enter Diagnostic Mode: a. Hold the F1 key until the display shows: DIAGNOSTIC PIN b. Enter the PIN number by pressing the following keys: 415049 c. Press 1 (BADGE) d. Press 1 (RAW DATA) 3. Hold the test badge near the front plate of the reader until it displays: PROX SUCCESS. 4.
