Quick Start Guide

Horizontal Cable Organizer for

NetShelter

SX or VX Enclosures

Tools required

Hardware (provided)

Product SKU Description Figure

19-inch EIA

1-U horizontal

cable

organizer

AR8425A

Route cables horizontally on the front or back

of the 19-inch EIA enclosure.

19-inch EIA

2-U horizontal

cable

organizer

AR8426A

Route cables horizontally on the front or back

of the 19-inch EIA enclosure.

19-inch EIA

2-U horizontal

cable

organizer

pass-through

AR8428 Route cables horizontally or front to back.

Cage nut tool (1)

(provided)

Phillips

screwdriver (1)

(not provided)

M6 x 16

Phillips slot

screws (4)

Plastic cup

washers (4)

Cage nuts (4)

PAGE 1
Horizontal Cable Organizer for NetShelter® SX or VX Enclosures Product SKU Description Figure 19-inch EIA 1-U horizontal cable organizer AR8425A Route cables horizontally on the front or back of the 19-inch EIA enclosure. 19-inch EIA 2-U horizontal cable organizer AR8426A Route cables horizontally on the front or back of the 19-inch EIA enclosure. 19-inch EIA 2-U horizontal cable organizer pass-through AR8428 Route cables horizontally or front to back.
PAGE 2
Installing cage nuts Horizontal cable organizers must be attached to cage nuts, which are provided. Caution: Install cage nuts horizontally, with the ears engaging the sides of the square hole. Do NOT install cage nuts vertically with the ears engaging the top and bottom of the square hole. 1. Insert the cage nut into the square hole by hooking one ear of the cage nut assembly through the far side of the hole. Note: Install the cage nuts on the interior of the vertical mounting flanges. gen0188a 2.