® Power Distribution Units AP9562, AP9563, and AP9564 AP9562, AP9563, and AP9564 are 15- and 20-amp Rack Power Distribution Units (PDUs) that provide 120-volt power to rack-mounted equipment. AP9562 , - . , 15-amp circuit breaker (1) - NEMA 5-15 outlets (10) . 12-foot NEMA 5-15 power cord AP9563 , - . , 20-amp circuit breaker (1) - NEMA 5-20 outlets (10) .
Power Distribution Units AP9562, AP9563, and AP9564 AP9564 , - . , 20-amp circuit breaker (1) - NEMA 5-20 outlets (10) . 12-foot NEMA 5-20 power cord Mounting brackets , Note 2 - , Brackets for horizontal mounting - Brackets for vertical mounting Each PDU is packaged with two types of mounting brackets (for horizontal and vertical mounting). Choose your mounting orientation and attach the appropriate brackets to the PDU for installation.
Safety and Grounding Read the following information before installing or operating your APC Power Distribution Unit (PDU): • This PDU is intended for indoor use only. • Do not install this PDU where excessive moisture or heat is present. • Never install any wiring, equipment, or PDUs during a lightning storm. • Plug this PDU into a three-wire, grounded power outlet only. The power outlet must be connected to appropriate branch circuit/mains protection (fuse or circuit breaker).
Installation Horizontal mounting (any standard 19-inch EIA-310 rack or enclosure) 1. Attach the horizontal-mounting brackets to the PDU. 2. Install the PDU using hardware included with your rack or enclosure. The PDU will occupy one U-space.
Installation Vertical mounting (any standard EIA-310 rack or enclosure) 1. Attach the vertical-mounting brackets to the PDU. 2. Install the PDU on a vertical mounting rail in your rack or enclosure.
Specifications AP9562 AP9563 AP9564 Electrical Input voltage range Maximum current draw 100–120 V 15 A 20 A 20 A Physical Size (h×w×d) 1.75×17.6×2.25 in (4.45×44.7×5.72 cm) Shipping size (h×w×d) 2.75×18.25×9.0 in (6.99×46.35×22.86 cm) Weight 5.5 lb (2.5 kg) Shipping weight 8.0 lb (3.
Warranty Limited warranty APC warrants the Power Distribution Units to be free from Warranty limitations Except as provided herein, APC makes no warranties, express or implied, including warranties of merchantability and fitness for a particular purpose. Some jurisdictions do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
Life-Support Policy General policy American Power Conversion (APC) does not recommend the use of any of its products in the following situations: • In life-support applications where failure or malfunction of the APC product can be reasonably expected to cause failure of the life-support device or to affect significantly its safety or effectiveness. • In direct patient care.
® APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to find answers to frequently asked questions (FAQs), to access documents in the APC Knowledge Base, and to submit customer support requests. – www.apc.com (Corporate Headquarters) Connect to localized APC Web sites for specific countries, each of which provides customer support information. – www.apc.
