00% Satisfaction Guaranteed To activate the 1-year warranty on your Bluetooth Headphones, visit http://www.alpatronix.com/ and click on the warranty link to register your product by filling out a simple and easy form. Alpatronix warranty will fully cover your purchase against all defects in material and/or workmanship for an entire year.
Thank you for choosing the Alpatronix HX110 Bluetooth Stereo Headphones. The HX110 has been designed by some of our most skilled audio engineers for comfort and precise sound. Please take some time to read this User’s Manual before using your device for the first time. If there are any problems with your purchase (wrong color, size, fit, etc.), or if you believe your purchase is broken or defective, please contact Alpatronix Customer Service by phone or email (support@alpatronix.com or 888 - 407 - 7515).
Step II. Learn your headphone’s buttons and functions S1. Multifunction button: Answer, hang up, reject, or redial calls. Power ON/OFF, Pair with streaming devices. S2. Skip Back: Skip to previous song (music streaming) or mute the microphone (phone calls) S3. Skip Forward: Play to next song (music streaming) or switch to phone talk (deactivate headset) S4. Volume Up S5.
Step III. Pair your headphones to your device(s) The HX110 is a wireless headphone and needs to be paired to your computer or mobile device before using (see compatibility list for a list of supported devices). Even better, the HX110 is equipped with Bluetooth 4.0, allowing it to be connected to two devices at the same time! To pair the headphones with the first device, 1. Make sure the HX110 is turned OFF.
Compatibility with Windows desktops, laptops, tablets, and smartphones may vary and depend on the specific driver installed on your device. Windows products do not use a universal Bluetooth driver, and Alpatronix cannot guarantee compatibility of every driver with the HX110. You can search and install Bluetooth drivers that support the standards listed above manually. Alpatronix does not offer a specific driver for the HX110. Please note that Bluetooth technology operates on a Master/Slave system.
Part B. Basic Use Instructions Features The HX110 has some awesome built-in features designed to provide you with comfort and perfect sound delivery: • • • • • • Steel telescopic speakers allow size adjustments for almost any head size. Comfortable leather ear pillows provide the ultimate comfort and noise isolation for prolonged wear. Hand-selected 40mm neodymium original diaphragm provides a full-range, high quality, clear, and balanced sound with deep lows and crystal clear highs.
2. Calls: When placing an outgoing call, the HX110 will automatically stream the call through the headphone and activate the microphone for two-way talk. When receiving a call, simply press the Multifunction Button (S1) to answer the call. When finished, press S1 again to hang up. To dial the last number on your phone, double-click S1. Note: Some mobile devices’ Bluetooth protocol may require to hold down the S1 button for 3 seconds in order to answer/hang up a call.
3. No LEDs come on when connecting to a charger: If the battery is completely depleted prior to charging, it may take a few minutes for the LED light to turn on. If the LED does not turn on after 10-15 minutes, contact Alpatronix Customer Service for assistance. 4. No sound is coming from my headphone: a. Make sure the headphone is fully charged and turned on. b. Make sure the headphone is paired and connected to your streaming device.
Extend the life of your HX110 The HX110 is built to last. There are steps you can take to ensure your device operates to the maximum length of time possible: 1. The HX110 is NOT waterproof. Avoid any contact with moisture. Do not submerge in water, and avoid any water/moisture/sweat splash. Moisture damage is NOT supported by manufacturer’s warranty, and can expose you to risk of electric shock, device overheating, or explosion. 2. Do not store in a wet/damp environment. Keep the HX110 in a dry environment.
Feature Bluetooth edition Frequency coverage Transmit Range Frequency Response Status Indication Compatible Products and Protocols Battery Charging Charge Time Playback time Standby time (paired with mobile standby) Specification: Bluetooth V4.0 + NFC + AptX 2.402GHZ ~ 2.480GHZ ISM Band 30ft (10m) 20Hz - 20KHz LED indicator Devices: Most Bluetooth products: All Apple desktops, laptops, iPads, iPhones, and iPods (Bluetooth enabled). All Android smartphones.
