ACP - ACPL User manual
The main features. • I n wall mountable remote control units for APart active speakers to facilitate the control of your speakers in your meeting-room, class room etc. • Brushed aluminium front. • The ACP and ACPL require no additional power supply. • The ACP allows remote power on/off, Volume control and direct muting. • The ACPL has the same features as the ACP but offers additionally a selectable microphone or stereo line input.
Connecting the ACP or ACPL panel 1. S witch of the power of your APart active speaker 2. Connect the ACP or ACPL unit to your active speaker (through CAT5 cable max 100 meters, maximum wire length depends on multiple factors, such as cable quality and external influence from high power lines etc.) 3. Only one ACP or ACPL can be connected to each each APart active speaker pair.
Technical data ACP Dimensions: 85x85x28mm (h x w x d) Weight: 70g
Technical data ACPL Dimensions: 85 x 85 x 28mm (h x w x d) Weight: 90g Input sensitivity stereo line: 500mV Input sensitivity microphone: 7mV
Warranty information APart-Audio warrants this product to be free of defects in material and workmanship for a period of one year for parts and for a period of one year for labor from the date of original end-user purchase. This warranty is valid only for the original enduser and cannot be transferred.
Using the ACP & ACPL panel After installing and connecting the ACP(L) panel to your APart active speakers, you can switch on the power switch of your APart active speakers. (use the power switch at the backside of the speaker set) With the “Power” button (1) on your ACP(L) you can now put your active speakers in either “on” mode or “standby” mode. With the “level” buttons (2) you can control the volume of your APart Active speakers through the ACP(L).
1 2 3
Using the local inputs of the ACPL Before you are able to use the inputs from the ACPL, you need to select this as a source at your APart active speakers. For example for SDQ5PIR, you can select the input through the IR remote control. You can connect a Dynamic microphone to the ACPL by using the “microphone” jack.6.3 mm (balanced mono input) (4) You can connect an MP3 player to the ACPL by using the “Stereo Line” jack. 3.
6 4 5