User Manual
For your Safety Warning z To prevent electric shock or other injury, please do not disassemble or repackage this product. z To prevent a fire, electric shock, or device malfunction, please do not use this product in a wet environment such as a bathroom. z During operation, do not expose the product in areas above 35°C (95°F) or below 5°C (41°F).
Table of contents For your Safety............................................................................ 2 Chapter 1 Introduction................................................................ 1 Features ....................................................................................... 1 System Requirements .................................................................. 1 Chapter 2 Package Contents ..................................................... 1 Chapter 3 The Remote Control ..........
Chapter 1 Introduction Features Plays back most media file formats. Plays media files from your PC via network. Supports USB external storage devices. Supports both NTFS and FAT32 file system. Supports both NTSC and PAL TV systems. Supports video output to full-HD 1080p. Supports HDMI and component video output.
Chapter 3 The Remote Control Changing the Battery of the Remote Control If the battery becomes depleted, change the battery according to the following instructions: Buttons POWER POWER on or off the media player. HOME Return to the main menu. MUTE Mute audio output, and press again to resume. DISPLAY Display current status, including track number and time elapsed/remaining. SETUP Enter the Setup Menu directly to change system settings. VOL + / - Volume up/down.
BACK Return to the previous screen when navigating the menus. FAST Press to fast rewind or fast forward the current playback. REWIND/FAST Press repeatedly to select faster rewind or fast forward speeds. FORWARD PAUSE/STEP Press to pause current playback. Press again to step to the next frame. Press PLAY button to resume playback. PREVIOUS Press to go the previous file when playing media. Press to page up the file list at File Browser. NEXT Press to go the next file when playing media.
Parts and Functions 1 2 3 4 Remote receiver: When using the remote, point the remote towards here. Power and access Blue Lights up: The power is on. indicator: Red Lights up: The media player is in standby mode. Power connector: Connect to the AC adapter. (DC 12V, 2A) USB 2.0 type A Connect to a USB Flash drive or a an external USB HDD. connector: 5 HDMI connector: Outputs digital video/audio signals with a HDMI cable.
Chapter 4 Quick Start How do I use this device? Copy media files from your computer to a USB storage device, and then connect it to this device. Then connect this device to your TV or Home Theater. The User Interface is somewhat intuitive like a Browser. Try starting with and buttons. How do I play media files on my TV? 1. Connect this device to your TV with correct cables. 2. Plug the AC adapter into the Power Connector to turn it on. 3.
Chapter 5 USB Connection Mounting the USB External Storage Compatibility 1. This device supports FAT16/32, and NTFS file systems. 2. This device supports USB external HDDs and USB Flash drives. 3. This device does not support USB external CD/DVD/BD/HDDVD/other ODD drives. Mounting of a USB External Storage This device automatically mounts a USB external storage connected.
* The Disk Management of Windows Vista/XP/2000 can only create a FAT32 partition up to 32GB. Media Files for Playback This device can play back the following media files: Video Photo** Audio Subtitle MPEG-1 (MPG/DAT), MPEG-2 JPEG MP3 SRT (AVI/ISO/IFO/MPG/VOB), BMP WMA SUB MPEG-4 (AVI/Xvid/ASP/AVC GIF WAV SMI HD/H.
Chapter 6 TV Connection Connecting to AV Equipments HDMI Connection The HDMI connector can output both digital audio/video signals. Many HDTV sets and digital AV receivers support this type of connection. (HDMI cable not provided) To a TV: To an AV receiver: If the HDMI cable is disconnected in playback, this device will stop playback immediately.
Composite Audio/Video Connection The composite audio/video is compatible with most TV sets and AV amplifiers (receivers.) Yellow: Video signal; White: Left audio channel; Red: Right audio channel. 1. Connect one end of the composite (Red, White, Yellow) cable to the player’s composite jack. 2. Connect the other end to your television’s composite jack. Component Video Connection (Y/Pb/Pr) If your TV supports Component Video input (Y/Pb/Pr), you can connect it for better video quality.
Power Connection 1. Make sure the power switch is off. 2. Connect the DC jack of the AC adapter to the connector marked “DC 12V”, plug the other end into an electrical outlet. Network Connection 1. Connect one end of the Ethernet cable to the player’s LAN connector. 2. Connect the other end of the Ethernet Cable to your networking device. Power on/off 1. Power on Press the power switch which is located on the back of the device. After the player is on, the power indicator on the front panel will light up.
Chapter 7 Main Menu 1. Power on the media player. 2. After a few second, the system will enter a main on menu. To enter the main menu, press the remote control too. 3. Press or to select All, Music, Movies, Photo, Setup option on the main menu, and press to select. Press to enter. Chapter 8 Setup The Setup option allows you to configure music, video, network, photo and system settings. Select Setup option on the main menu or select on the remote control to enter the Setup menu.
Digital Output 1. Press to enter. 2. Press or to select from HDMI RAW or HDMI LPCM to enable or disable the function. 3. Press to confirm or press to exit. HDMI LPCM: It is the original bit stream and will provide a better audio output quality. HDMI RAM: It is the default setting, and provides 2 channels audio output. VIDEO SETUP Press or on the remote control to select the Video option. Press to enter. Aspect Ratio Use it to select the way videos are displayed. 1. Press to enter. 2.
Contrast Select to set contrast levels. 1. Press 2. Press 3. Press to enter. or to adjust contrast. The new setting is previewed onscreen. to confirm or press to exit. DNR Select to adjust DNR. 1. Press to enter. 2. Press or on the remote control to select “Off” to disable this function or “Auto” to active it. 3. Press to confirm or press to exit.
1080P 24Hz Use it to select the video display resolution. If your video file is 1080P 24Hz, suggest to enable this option. It could provide the better video display resolution. Network Setting Press or on the remote control to select the Network option. Press press to enter, or to exit. Wired Lan Setup Select to set the Network Setting. Before use the Network functions, please check following items: 1. Connect the this device to Network first. 2. Please enable NetBIOS of TCP/IP on computer. 3.
Fix IP Using Fixed IP, it is required to enter IP (Manual): address, Subnet Mask, Default Gateway. For further assistant to above settings, please check local network setting. 1. Press to enter the entry screen and press to enter the IP address, and select OK to confirm. 2. Press to confirm or press to exit. Wireless Setup Before configuring the WLAN settings, please check the following: 1. Make sure the WLAN USB Adapter is connected to the USB port. 2.
Infrastructure It is used to connect computers with (AP): wireless network adapters, also known as wireless clients, to an existing wired network with the help from wireless router or access point. Get SSID Name System will search for an existing SSID (Service Set Identifier) auto. And select the access point you wish to access from the SSID list. Note: In the Security list, WEP (Wired Equivalent Privacy) and WPA (Wi-Fi Protected Access) means the network is encrypted, i.e.
Peer to Peer It is used to connect wireless clients (Ad Hoc): directly together, without the need for a wireless router or access point. Ad Hoc Setup Set the Wireless SSID, Wireless Security, and Host IP for the Ad Hoc connection. Press to enter. Press to return. Note: Both the player and your PC need to use the Ad Hoc mode, share a common SSID, and be put into the same IP range. Select to confirm and go to the next step. If the test is ok, the network information will be displayed.
Text Encoding Use it to select to choose the subtitle encoding language. (Please check your subtitle encoding format and make sure the subtitle files are located in the same folder first.) 1. Press to enter. 2. Press or to select the subtitle language. 3. Press to confirm or press to exit. System Upgrade Use it to upgrade firmware from USB device. 1. Please copy the Upgrade firmware to USB device first. 2. Press to enter. 3. Press or to select System Upgrade or System Reinstall. 4.
Resume Play Use it to resume playback. 1. Press to enter. 2. Press or to enable (ON) or disable (Off) this function. 3. Press to confirm or press to exit. Slide Show Time Select to set photo slide show time. 1. Press to enter. 2. Press or to select interval photo time you require. 3. Press to confirm or press to exit. Transition Effect Select to set the transition effect of photos. 1. Press to enter. 2. Press or Press 3. Press to select effect option. to confirm.
Screen Saver Screen Saver could save power. to enter. 1. Press 2. Press or to enable (ON) or disable (Off) this function. 3. Press to confirm or press to exit. Movie Preview Movie Preview function could help you preview movie on files browser window. to enter. 1. Press 2. Press or to enable (ON) or disable (Off) this function. 3. Press to confirm or press to exit.
Network You can streaming playback the multimedia files shared on the local area network. At first, please make sure that you have read “Network Setting” and made the right settings. 1. Press to enter Network option. 2. Press or select the multimedia files shared at your PC name in your local workgroup. Press to confirm. 3. Enter User ID and Password, press to confirm. 4. All directories and supported media files will be displayed.
2. While browsing high definition video files (resolution up to 720p / 1080i / 1080p) via Ethernet or WLAN, the video might be buffering. It is normal due to the limit of network speed or signal strength. 3. Due to different network conditions, sometimes the workgroup might not be accessed or shown in the list. You could to use ‘My_Shortcuts’ to browse shared files. Chapter 10 Playing Movies You could watch videos on your TV with using the Media Player. 1.
Movies Playback controls Use these buttons on the remote control to control media playback: Button Function Stop Stop the playback. Enter/Play Play the media files. FR/FF Press to fast rewind or fast forward the current playback. Press repeatedly to select faster rewind or fast forward speeds: 1.5x, 2x, 4x, 8x, 16x, 32x. Press PLAY button to resume playback. PAUSE/STEP Press to pause current playback. Press again to step to the next frame. Press PLAY button to resume playback.
Option Use it to organize your files at file browser. 1. Press or to select the file or folder, press to enter. or 2. Press to select Return, Rename and Delete. Press to enter. Return: Exit Option menu. Rename: Enter new name. Press OK option to change or press to exit. Delete: Delete the file. Displaying the Video Press DISPLAY button on the remote control to show the media information information. Press again to hide the information. Subtitle Press or or to adjust subtitle position.
Music Playback controls Use these buttons on the remote control to control media playback: Button Function Stop Stop the playback. Enter/Play Play the media files. FR/FF Press to fast rewind or fast forward the current playback. Press PLAY button to resume playback. PAUSE/STEP Press to pause current playback. Press PLAY button to resume playback. Press to go the previous files, and press PLAY button to play. Press to go the next file, and press PLAY button to play. SETUP Enter to Setup sub-menu.
Chapter 12 Playing Photo You could browse photos on your TV using the Media Player. or 1. If you want to view Photos, press buttons to select Photo or All option on the main menu, press button to confirm. 2. Press or to select the device which the media is stored from USB or Network and press the 3. Press to confirm. to select files that you or want to browse. Press the to confirm. The photo is displayed in full screen.
Option Use it to organize your files at file browser. 1. Press or to select to the file or folder, press enter. 2. Press or to select Return, Rename and Delete. Press to enter. Return: Exit Option menu. Rename: Enter new name. Press OK to exit. option to change or press Delete: Delete the file. Photo Slideshow Enter MISC option to set Slideshow Time function. When the photo is displayed in full screen mode, the slide show starts automatically.
Chapter 13 Troubleshooting Problem Possible Cause Solution TV screen does not ◎ Video setting is not correct. ◎ Press the TV SYSTEM button to display normally. No power. (All LEDs are off) Can’t operate with the remote control. switch output TV system. ◎ The power plug is not properly connected. ◎ If this device cannot be activated by pressing ◎ Check the power connection and plug it again. ◎ Refer to “Power Connection” section for its solution.
Problem Possible Cause Solution Can’t change audio ◎ This movie comes with only ◎ Check the contents. or subtitle language one language. of a movie. No audio output. ◎ Audio cable is not connected. ◎ Check audio connection. ◎ Volume is too low. ◎ Increase volume. ◎ Playing in fast forward, in ◎ Resume normal playback speed rewinding or in slow motion. ◎ Incorrect TV audio input channel. by pressing button. ◎ Some TV sets equip with separate composite and component audio inputs.
Problem screen or repeated segments. Possible Cause Solution VIDEO_TS file. Press the button to play the Main Title directly.
Problem Possible Cause Solution The attached USE ◎ The USB device’s file system ◎ Make sure the file system is FAT devices are not is not supported. or NTFS. visible. The media Player ◎ The network is not detected. ◎ Check your network setting. could not connect ◎ The PC is not detected. ◎ Go to Apacer website to your PC via download TranscodeServer.exe. network.
Data mode Only), PNG (not support interlace/animation mode) DivX Subtitle IDX/SUB, SRT, SSA, SUB, SMI DVD Folder DVD Menu/Audio/Subtitle MAX CONTENT RESOLUTION Video 1920 x 1080 pixels JPEG 4608 x 3456 pixels MP3 320kbps VIDEO OUTPUT TV NTSC / PAL Screen Ratio 4:3 / 16:9 Component 480p / 576p / 720p (50/60Hz) / 1080i (50/60Hz) / 1080P (50/60 Hz) AUDIO OUTPUT Analog Audio Stereo Digital Audio HDMI LPCM/RAW DATA OUTPUT POWER SUPPLY Input AC 100-240 V, 50/60Hz Output DC 12V, 2A BATTERY
The copyright on this user manual remains with out company. No part of this user manual may be transmitted, reproduced or changed. The product specifications, design and this user manual’s content are subject to change without notice.