TABLET PC User Manual
Attention 1. Desk 1.1 Touch panel 1.2 POWER 1.3 BACK 1.4 MIC 1.5 Volume +/Volume1.6 Earphone jack 1.7 Video output interface 1.8 TF card 1.9 Micro USB 1.10 DC adapter 1.11 Recovery 2. First use 2.1 Battery management and charge 2.2 Connection with PC 3. Equipment operation interface 3.1 Description of main interface 3.2 Description of status bar 3.3 How to use the touch panel 4. Basic Functions 4.1 Silent mode/Volume/Notification ringtone/Audible selection/Screen lock sounds 4.2 Application 4.3 Storage 4.
• Avoid any form of violent contact with the device such as drops or knocks. This could cause damage to the TFT display screen. • Please choose the appropriate volume to avoid conditions such as tinnitus. DO NOT use the headphones at an excessively loud volume. • Please charge in the following circumstances; • A. The battery power icon shows no power. • B. The system automatically shuts down. • C. There is no response from the user interface. • D.
Short Press BACK button “◀ ” to return to the last interface. 1.4 MIC Recording 1.5 Volume+/Volume- can be pressed accordingly to change the volume. 1.6 Earphone jack 3.5mm Standard earphone jack 1.7 TF card TF-CARD slot: external T-FLASH card 1.8 Micro USB Micro USB jack: Connect to the computer for data transmission, charging and external connection of USB flash drives. 1.9 DC Adapter For charging your tablet battery. 1.10 Recovery Upgrade firmware if tablet crashes. 2. First use 2.
window. Click “turn on USB storage” to connect to PC. In load mode, you can copy and delete files on your device or on a memory card. 3. Equipment operation interface 3.1 Main interface description: After start up, you will enter the main interface. In the main interface, you can: Manage main interface software icons by long pressing an icon for 3 seconds. Delete icons by long pressing for 3 second. Drag the icons to the top left corner.Appear “remove” and the icon will be deleted.
Unknown sources: Click “Unknown Sources” then click “OK”. Manage application: Manage and uninstall application. 【Note】: Please close any USB connections when upgrading the firmware. Uninstalling applications 1. Enter “setting”>”Applications”>”Manage application” and users will see the installed programs list. 2. Click the programs you want to uninstall and you will enter the following interface. 3. Click “Uninstall” then you can delete the application. 4.
Select the APP you would like to install, click it to install, go back to the main menu and you will see the installed app you just selected. Note: Some APPs must be installed by memory card. Downloaded 3rd party APPs may not be installed properly on the device. Manage; click manage and enter third party interface. Click the “install” icon to enter the action interface. 146.FAQs 6.1 Why won’t my device open? 1. Check the battery power. 2. Connect the adaptor first then check again. 3.
FCC statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
