0
FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CONTENTS ・FOR SAFETY FCC warning …………………………………………………………………………. 1 ・INTRODUCTIONS Packing List ………………………………………………………………………….. 4 About AR-mini ……………………………………………………………………….. 5 About AR-mini’s Mode ………………………………………………………………. 5 Part Name and Function …………………………………………………………….. 6 Descriptions of LCD (Liquid Crystal Display) ……………………………………… 9 ・ PREPARATIONS AND BASIC USAGE Connect the antenna ………………………………………………………………….
CONTENTS ・SETTING MODE Changing the Fast Step ……………………………………………………………… Setting the Lamp ……………………………………………………………………… Setting the Timer ……………………………………………………………………… Setting the S-meter Sensitivity ………………………………………………………. Setting the S-meter Buzzer ………………………………………………………….. Setting the Resume Time ……………………………………………………………. Setting the Search ……………………………………………………………………. Setting the Memory Scan …………………………………………………………….
Packing List When you unpack the carton box, could you check the following items are provided in the carton box. If you will find a missing item, please contact your dealer.
About AR-mini AR-mini can receive the 0.1 MHz to 1299.995 MHz of AM, FM and Wide FM bands. AR-mini is designed for simply operating by five keys. About AR-mini’s Mode AR-mini has the following modes: VFO Mode: In this mode, you can change the frequency and band to receive the desired broadcast. This mode is basically mode for AR-mini Preset Mode: In this mode, some frequencies and bands are memorized previously as the preset channels. You can receive the desired broadcast, recall the preset channel.
6
① FUNC key ●Press this key with other key or dial to use the function operation. ⑥Antenna connector Fix the supplied antenna or optional antenna. ② MONI key ●Hold down this key to open the squelch and monitor. ●Hold down the FUNC key and press this key to lock the keys except POW, FUNC and this keys. ⑦Dial Knob ●Turn this knob to change the frequency or memorized channel. ●Press this knob to switch the volume or tone frequency setting.
⑫ Battery case Remove the battery case lid, and install the supplied Ni-MH battery or AAA battery. ⑬External DC jack ●Connected the AA-mini (AC adaptor) or DC-mini (DC adaptor). And, can be used charging the Ni-MH battery. ⑭ Earphone jack Remove the earphone jack cover and connect the optional earphone. ⑮ Battery case lock Unlock the this to remove the battery case lid.
Main Display: Frequency, memory name, set mode name or the other various conditions are displayed.
10
11
PWR 12 PWR key
AA-mini AC Adaptor Input:100_240V AC Output:6V DC 500mA DC-mini DC Adaptor Input:12_24V DC Output:6V DC 500mA PC-mini Programming cable USB_UART Interface CO-mini Clone cable 13
PWR PWR key PWR PWR 14
Press the knob 15
Press the knob twice 16
VFO⇔Memory 17
18
19
20
Dual watch does the frequency of ten sets beforehand. 1 Confirm VFO mode is set. 2 Hold down the FUNC key and press the band down key for 2 seconds or more. Hold down the FUNC key and selected the dual receive memory number by the dial knob. To cancel the priority watch press the V/M key or dial knob. 3 4 The default of dual receive memory Dual receive memory no. A00 b00 A01 b01 A02 B02 A03 B03 A04 B04 A05 B05 A06 B07 A07 B07 A08 B08 A-b-- 21 Frequency MHz 10.000 100.00 200.00 300.00 400.00 500.00 600.
22
23
24
25
All memories can be add the name 1. To set memory mode from VFO mode, press the V/M key. 2. Hold down the FUNC key and press the SCAN key to writing mode. 3. Selected the words by dial knob. 4. Hold down the FUNC key and turned the dial knob to change digit. 5. Hold down the FUNC key and press the V/M key to enter the write.
Can be skip the memory in the scanning 1. To set memory mode from VFO mode, press the V/M key. 2. Selected the memory channel to skip. 3. Press and hold the V/M key for 2 seconds. 4. Memory skip icon is displayed 5. Repress and hold the V/M key for 2second to cancelled.
Can be scan the memory in a bank. 1. Hold down the FUNC key and press the dial knob to set mode and selected the s09. 2. Selected the BANK by the dial knob. 3. Press the dial knob and returned to VFO mode. 4. Press the V/M key, and press the SCAN key to scanning the Memory bank mode. 5. When change the bank, use the dial knob. 6. Press the V/M key, while to scan stop and return the memory mode. 7. Press the V/M key again, return to VFO mode. Can be scan the memory in few banks.
This setting used to preset mode. 1. Hold down the FUNC key and press the BAND UP key to watch select function. 2. Select the preset mode by the dial knob. 3. The P icon and memory number are displayed. 4. select the band of the preset memory by BAND UP key or BAND DOWN key This setting uses to the tone squelch 1. Confirm VFO mode is set. 2. Hold down the FUNC key and press the MODE key and select the TSQ. 3. Press the V/M key or press the dial knob to TSQ mode. 4.
30
31
32
33
34
35
36
37
38
39
40
41
• Available DCS code 42
43
44
Charging the Ni-MH Battery 45
46
SPECIFICATIONS ◆GENERAL ・Frequency coverage 100kHz ~821.995MHz 851.00MHz ~866.995MHz 896.00MHz ~1299.995MHz ・Modulation FM、WFM、AM ・Antenna impedance 50Ω unbalanced ・Antenna connector SMA type ・Frequency resolution 5kHz、6.25kHz、*8.33kHz、*9kHz、10kHz、12.5kHz、 15kHz、20kHz、25kHz、30kHz、50kHz、100kHz *Selectable depending on the operating frequency band. ・Operating temperature range -10℃ ~ +50℃ ・Reference frequency stability ±2.
Authority On Radio communications C AOR, LTD. 2008 All Rights Reserved Prinred in JAPAN 08/2008 AOR, LTD. 2-6-4 Misuji, Taito-ku 111-0055 JAPAN TEL:+81-3-3865-1695 FAX:+81-3-3862-1697 URL: http://www.aorja.com Email: mail@aorja.