FCC ID: U6DAL420VA ATTACHMENT E. - USER’S MANUAL - HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No.
1
Contents Foreword Caution .......................................................................................................................................................... 3 Important Safety Instructions .................................................................................................................... 4 Precaution .....................................................................................................................................................
Contents Auto Adjust ............................................................................................................................................ 45 1366 Mode (Native Mode) ................................................................................................................... 45 Sound Control Adjusting the Sound Balance .................................................................................................................... Changing the Sound Mode ....................
Caution CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions Always be careful when using your the TV. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings.
Precaution In case of the following cases, unplug the unit from the wall outlet and contact qualified service center. - when power supply cord or plug is damaged. If liquid has been spilled on the unit or if alien objects have fallen into the unit. If the TV has been exposed to rain or water. If the TV does not operate normally by following the operating instructions. If the TV dropped or the cabinet has been damaged. When the TV exhibits a distinct change in performance.
Precaution Setting WARNING NO!! NO!! When installing the TV on a table, be careful not to place it too close to the edge of the table. - This may cause the TV to fall, causing serious injury to a child or adult, and serious damage to the TV. This TV is designed to be mounted horizontally (wide viewing). Any inquiry regarding its vertical position should be forwarded to the manufacture directly. 6 Provide ventilation for the TV.
Precaution Power CAUTION NO!! AC100-240V AC100-125V AC200-240V AC240 (SAA-TYPE) Use only the accessory cord designed for this product to prevent shock. The power supply voltage rating of this product is AC100-240V, the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC. When it is used by other power supply voltage, power cable must be changed. Consult your product dealer.
Precaution Operation CAUTION NO!! Upon completion of any service or repairs to this the TV, ask the service technician to perform safety checks to determine that the TV is in a safe operating condition. NO!! Do not place anything containing liquid on top of the TV. - This may cause a fire or could give an electric shock. In case of smoke or strange smell from the TV, switch it off, unplug it from the wall outlet and contact your dealer or service center.
Precaution Operation WARNING Do not use new battery with old one. Put the batteries in right direction (+/-). Only use the specified batteries. - This can lead a fire or electric shock caused by leakage liquid from abused batteries. - Otherwise, it can make a fire, injury and pollution caused by bursting of batteries. - This make cause damaged the TV or could give an electric shock. More than two people are necessary to move or take off the package due to the product’s weightiness.
Viewing the Control Panel OSD Button Position Front Panel 1 2 3 4 5 6 7 8 1 Input Source Select 2 Up (See the box below) 3 Down (See the box below) 4 Stand By 5 Remote Sensor 6 Status/Power Stand By Remote Sensor Source/EXIT Menu/SET VOLVOL+ CHCH+ Indicator LED 1 2 3 4 5 6 7 TV/TV VOLVOL+ CHCH+ Menu Stand By OSD Button Function INPUT SELECT Select the signal source from multiple input sources such as TV, ATV, DTV, VIDEO, VIDEO2, S-VIDEO/AV, COMPONENT1, COMPONENT2, PC, DVI and HDMI.
Viewing the Connecting Panel Types of inputoutput ports . Type 1 Type 2 1. Type 1 DVI & D-S ub (PC ) S ound DVI (HDC P) HDMI R S -232C (TV) D-S ub (PC ) C OMPONE NT1, 2 C OMPONE NT S ound1, 2 1 2 3 4 5 6 7 VIDE O1 VIDE O OUTPUT2 VIDE O2 S PDIF (Optical) Line Out AV Input S -VIDE O Input 8 9 10 11 12 13 14 AV/S -VIDE O S ound TV Antenna AC Power S peakers R S -232(DTV) 15 16 17 18 19 Type 1 is all PDP models and s ome LC D models . 2.
Viewing the Connecting Panel DVI, D-Sub (PC) Sound Cable Connect (1) port. DVI Cable Connect (2) port. HDMI Cable Connect (3) port. RS-232C Cable Connect (4) port. D-Sub (PC) Cable Connect (5) port. Component Cable Connect (6) port. Component & S-Video & AV Sound Cable Connect (7) and (15) port. Line Out Cable Connect (12) port. S-Video Cable Connect (14) port. AV Cable Connect (13) port. RF Cable Connect (16) port. AC Power Cord Connect (17) port.
Viewing the Remote Control Button Description 1 POWER Turn the PDP on and off. MUTE Temporarily cut the sound and restore it. PICTURE There are 4 picture modes. Standard ➔ Vivid ➔ Mild ➔ User Pre.PG Turn to the previous programme or exit OSD. 2 1 2 3 5 4 6 3 4 7 8 9 10 11 12 13 15 16 V.Size Choose the Aspect Ratio. 16:9 ➔ 4:3 ➔ Panorama ➔ Zoom1 ➔ Zoom2 6 Favorite (Favourite) Tune to your next favorite programme. ATV/DTV Switch the Input Source Analogue TV and Digital TV.
Viewing the Remote Control 1 CH LIST (HDTV) Set & display ALL DTV channel list as the default channel list. 2 EPG (Electronic Program Guide) (HDTV) Activate Electronic Program Guide information broadcast by the DTV networks. 3 SubTitle (HDTV) Enable / disable program subtitles. 4 ZOOM (HDTV) Zoom out 4:3 pillar box black bars. 5 MTS Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected.
Viewing the Remote Control ON/OFF button: Change the PIP window mode. OFF ➔ Small ➔ Large ➔ Twin Small Large Twin SOURCE button: Change the source of the PIP window. The available sources are shown as below. 1. Type1 PIP Main ANALOGUE TV DIGITAL TV VIDEO1 VIDEO2 S-VIDEO/AV COMPONENT1 COMPONENT2 PC DVI HDMI ANALOGUE TV DIGITAL TV VIDEO1 VIDEO2 S-VIDEO/AV COMPONENT1 COMPONENT2 PC DVI HDMI – – – – – – – – – – – – – – – – – – – – – – – – 2.
Viewing the Remote Control Loading the Batteries 1 Press on the cover and slide in the direction of the arrow. 2 Load two AAA batteries, taking care that the + and - ends face the correct direction. 3 Close the cover until it clicks.
Installation Table Stand Installation (Optional) Wall Mount Installation (Optional) < The TV can be installed on the desk as shown above. > < The TV can be installed on the wall as the picture above. > 4 inch (10.16cm) 1.18 inch (Min) (3cm) 4 inch (10.16cm) 4 inch (10.16cm) 1.18 inch (Min) (3cm) 4 inch (10.16cm) 4 inch (10.16cm) 4 inch (10.16cm) 2.36 inch (5.99cm) 2.36 inch (5.99cm) • Table stand mount minimum allowable clearances for adequate ventilation.
Connecting the TV Cable 1. Type 1 TV Antenna C able 2. Type 2 C onnec tion the T V C able 1 C onnect the TV Antenna cable to the TV input jack. Press INPUT button on the remote control and select TV on OS D. 2 Use PG+, PG- button or numeric button to change TV programme for your programme selection. 3 Press Pre. PG button on the remote control to tune the previous programme. 4 Also, you can tune to cable service provided programmes using the cable box.
Connecting the VCR Watc hing V C R 1 Press INPUT button on the remote control and select video sources. 2 Insert a video tape into the VC R and press the PLAY button on the VC R . N o t es € To avoid picture nois e (interference), leave an adequate distance (over 3m) between the VC R and TV. € When connecting the TV with external equipment, match the colour of connecting ports (e.g. Video -Yellow, Audio(L) - White, Audio(R ) - R ed).
Connecting the DVD C onnec ting the DV D € C onnect the three separate component video cables to the DVD player's Y, Pb and Pr jacks and to the component jacks on the TV. € C onnect the audio cable to the DVD player's audio L (White) and R (R ed) jacks and to the L and R audio jacks beside the component jacks on the TV. € C onnect the HDMI cables to the DVD player•s and to the HDMI cables on the TV. 1. Type 1 C OMPONE NT1 & S OUND HDMI C OMPONE NT2 & S OUND 2.
Connecting the DVD How to Use 1 Turn on the DVD player. 2 Press INPUT button on the remote control of the TV and select HDMI, COMPONENT1 or COMPONENT2. Component Input Ports You can get better picture quality if you connect DVD player with component input sockets as below.
Connecting the Set Top Box How to C onnec t C onnect set top box video inputs to AV, C OMPONE NT, HDMI, PC or DVI jacks on the TV. Audio inputs to Audio sockets beside the L (White) and R (R ed) audio jacks which you connect video inputs. 1. Type 1 2.
Connecting the Set Top Box How to Use 1 Turn on the set top box. 2 Press INPUT button on the remote control of the TV and select COMPONENT1, COMPONENT2, HDMI, PC or DVI. 480i/60Hz 480p/60Hz 576i/50Hz 576p/50Hz 720p/50Hz 720p/60Hz 1080i/50Hz 1080i/60Hz Supported Signals COMPONENT1 COMPONENT2 PC DVI HDMI – – – – – – How to Connect With AV Connect a AV cable to the AV jacks of the STB (set top box) and the TV.
Connecting the PC ( D-Sub & DVI ) 1. Type 1-1 DVI from PC 2. Type 2 D-S ub 15pin (VGA) from PC C onnec ting a P C to the T V C onnect a PC (15pin) video cable between the video output port on the PC and the PC port on the TV. P in C onfiguration 15pin signal cable (based on protruded pin). To watc h the P C s c reen 1 Turn on the TV and press INPUT button to select the PC mode. 2 Turn on the PC and check for the PC requirement. 3 Adjust the PC screen in Position menu. (S ee 38 page.
Displayable TV Specification Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 720 x 400 31.469 37.927 70.08 85.03 640 x 480 31.469 35.000 37.861 37.500 43.269 45.913 53.011 59.94 66.66 72.80 75.00 85.00 90.03 100.04 800 x 600 35.156 37.879 48.077 46.875 53.674 56.000 64.016 56.25 60.31 72.18 75.00 85.06 90.00 100.00 832 x 624 49.725 74.55 1024 x 768 48.363 56.476 60.023 68.677 60.00 70.06 75.029 84.997 1152 x 864 67.50 75.00 1280 x 1024 64.00 60.
Basic Operation Turning the T V ON/OF F Press the Power button on the remote control. The TV will turn on and you will be ready to use its features. You can also use the Power button on the front panel. S elec t S ourc e Press INPUT button on the remote control. Then you can see the source list menu shown as below. 1. Type 1 2. Type 2 INP UT 1. A N A L O G U E T V INP UT 2. D IG ITA L T V 1. V ID E O 1 2. V ID E O 2 3. V ID E O 1 3. S -V ID E O /A V 4. V ID E O 2 4. C O MP O N E N T 5.
OSD Menu Structure • OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. • Press the Menu/Set button on the remote control to see the main OSD menu.
Setting the Channel DTV Preferred Audio Type (I-II) You can select desired audio signal from broadcaster. 1 Press Menu/Set button to display the main Channel OSD menu. Digital TV Setup 2 Select the Channel main menu. Analogue Reception 3 Press Menu/Set button to enter the sub menu. ➛ Enabled ❿ Analogue TV Setup 4 Select the Digital TV Setup and press Menu/Set button to enter the sub menu. 5 Select Preferred Audio Type. Then the cursor moves into the Move Enter Exit parts.
Setting the Channel DTV Channel Favourites You can assign any scanned channel to TV Favourite List / Radio Favourite List. 1 Press Menu/Set button to display the main Channel OSD menu. Digital TV Setup 2 Select the Channel main menu. ➛ Analogue Reception 3 Press Menu/Set button to enter the picture menu. Enabled ❿ Analogue TV Setup 4 Select Digital TV Setup and press Menu/Set button to enter the sub menu. 5 Select Channel Favourites with button Move and press Menu/Set button.
Setting the Channel Storing Channels Manually (DTV) 1 Press Menu/Set button on the remote control to Channel display the main OSD menu. Digital TV Setup 2 Select the Channel main menu with button on the remote control. ➛ Analogue Reception Enabled ❿ Analogue TV Setup 3 Press Menu/Set button to enter the sub menu. 4 Select the Digital TV Setup and press Menu/Set button to enter the sub menu.
k Setting the Channel DTV Test Reception 1 Press Menu/Set button on the remote control to Channel display the main OSD menu. Digital TV Setup 2 Select the Channel main menu with button on the remote control. Analogue Reception ➛ Enabled ❿ Analogue TV Setup 3 Press Menu/Set button to enter the sub menu. 4 Select the Digital TV Setup and press Menu/Set button to enter the sub menu. Move Enter Exit 5 Select Test Reception with button and press Menu/Set button.
Setting the Channel Storting Channels Automatically (DTV) From here, the TV will perform automatic scan the whole channel frequency for available digital channels. 1 Press Menu/Set button to display the main Channel OSD menu. Digital TV Setup 2 Select the Channel main menu. 3 Press Menu/Set button to enter the sub menu. ➛ Analogue Reception Enabled ❿ Analogue TV Setup 4 Select the Digital TV Setup and press Menu/Set button to enter the sub menu.
Setting the Channel Storing Channels Automatically (ATV) You can now search for and store the TV channels in two different ways: using Auto Scan or Manual Scan. 1 Press Menu/Set button to display the main Channel OSD menu. Digital TV Setup 2 Select the Channel main menu. Analogue Reception 3 Press Menu/Set button to enter the sub menu. ➛ Enabled ❿ Analogue TV Setup 4 Select the Analogue TV Setup and press Menu/Set button to enter the sub menu.
Setting the Channel Auto Scan (Other Countries) Asia Nation Selection Nation Selection Malaysia Others Israel Others Pakistan Others Kuwait Others Singapore Others Arab Emirates Others Iran Others China Czech Rep.
Setting the Channel Storing Channels Manually (ATV) 1 Press Menu/Set button on the remote control to Channel display the main OSD menu. Digital TV Setup 2 Select the Channel main menu with button on the remote control. Analogue Reception ➛ Enabled ❿ Analogue TV Setup 3 Press Menu/Set button to enter the sub menu. 4 Select the Analogue TV Setup and press Menu/Set button to enter the sub menu.
Setting the Channel ATV Fine Tuning the Channel Reception The fine tuning function lets you manually adjust the TV's tuner if you have difficulty tuning analog channels. 1 Press Menu/Set button to display the main Channel OSD menu. Digital TV Setup 2 Select the Channel main menu. Analogue Reception 3 Press Menu/Set button to enter the sub menu. ➛ Enabled ❿ Analogue TV Setup 4 Select the Analogue TV Setup and press Menu/Set button to enter the sub menu.
Setting the Channel ATV Editing the Channels Edit Favorite Programme list You can store of your favorite channels for each available input source (such as TV or CATV). Then, when you press the Favorite button on the remote control, the TV display only the favorite channels you previously stored, allowing you to quickly and easily find frequently wanted channels. 1 Press Menu/Set button to display the main Analogue TV Setup OSD menu. Auto Scan 2 Select the Channel main menu.
Setting the Channel Digest Function With the Digest function, you can select a TV programme watching 16 programme at once. This function works in TV mode only. 1 Press the DIGEST button on the remote control. 2 By pressing the channel number. The selected channel becomes main window. 3 You can make off the Digest Function by pressing DIGEST button again. 38 16 side windows are renewed clockwise. Next memorized programme appear in the renewed windows.
Teletext Teletext On/Mix/Off You can switch on and off teletext function by pressing TEXT button on remote control. Teletext function is available only with TV and S-video/AV input port VIDEO1, VIDEO2 and other port are not support teletext function. TOP Text The user guide displays four fields - red, green, yellow and blue - at the bottom of the screen. The yellow field denotes the next group and the blue field denotes next block.
Setting the Picture Changing the Picture Mode Your the TV has 3 automatic factory preset picture settings (Standard, Vivid and Mild). You can choose Standard, Vivid or Mild by pressing Picture button on the remote control (or by making a selection from the menu). Or you can select User which automatically recalls your personalized picture settings. Picture 1 Press Menu/Set button to display the main OSD menu. 2 Select the Picture main menu. 3 Press Menu/Set button to enter the sub menu.
Setting the Picture Contrast Adjust brightness difference between bright part of the screen and dark part. Distinct ➛ ❿☎Vague Dark ➛ ❿☎Bright Decrease ➛ ❿☎Increase Less sharp ➛ ❿☎Sharp Green color is deeper ➛ ❿☎Red color is deeper Brightness Adjust brightness of the screen. Color Adjust deep and light colour of the screen. Sharpness Adjust vividness of the screen. Tint Adjust the balance between green and yellow.
Setting the Picture Changing the Colour Temperature Your TV has 5 screen temperatures (colour settings). 1 Press Menu/Set button to display the main Picture OSD menu. 2 Select the Picture main menu. 3 Press Menu/Set button to enter the picture menu. 4 Select Temperature and press Menu/Set button to enter the sub menu. Then the picture-temperature under menu appear.
Setting the Picture Video NR (Noise Reduction) This function automatically filters out and reduces the image noise and improves picture quality where receiving weak signals. 1 Press Menu/Set button to display the main Picture OSD menu. 2 Select the Picture main menu item. 3 Press Menu/Set button to enter the sub menu. 4 Select Video NR. Then the cursor moves into the ➛❿ parts.
Setting the Picture Aspect Ratio Description 16:9 16:9 video : No change. 4:3 video : Expands 4:3 video signal horizontally to fit the 16:9 screen. Panorama 16:9 video : No change. 4:3 video : Expands 4:3 video horizontally to fit the 16:9 screen and to minimize distortion, sides are expanded more than center. Zoom1 Expands 16:9 mode screen vertically. Zoom2 Expands Zoom 1 mode screen vertically. 4:3 16:9 video : The image is suppressed. 4:3 video : No expansion. There are gray areas besides the image.
Setting the Picture ( PC ) In PC Mode, you can adjust the H, V-Position, H-Size and Phase. Also you can adjust them automatically. Position You can change H, V-Position, H-Size and Phase in PC mode like usual PC monitors. You can also adjust them automatically. (Auto adjust function.) 1 Press Menu/Set button to display the main Picture OSD menu. 2 Select the Picture main menu with button. 3 Press Menu/Set button to enter the sub menu.
Setting the Picture ( PC ) H-Position ➛ ❿☎ ➛ ❿☎ Mismatch Match V-Position Phase 46
Setting the Sound In Sound Menu, you can adjust balance, MTS (Multi-Track Sound), AVC (Auto Volume Control) and select the equalizer settings. Adjusting the Sound Balance This control allows you to adjust the balance of the left and right speaker output. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Sound main menu. 3 Press Menu/Set button to enter the sub menu. 4 Select Balance and press Menu/Set button.
Setting the Sound User 100Hz 500Hz 1.5KHz Move 5KHz Adjust 10KHz Exit Notes BBE VIVA: Optional BBE VIVA SRS: Optional SRS TruSound User Adjust You can use the OSD menu to change the Treble, Bass, Balance, and DRC according to your preference. 1 Equalizer menu appear when you select Select User Mode (Previous page) User mode. User 2 Select a gain bar with button on the remote control and adjust it with button. 3 Press Exit button on the remote control to exit equalizer.
Setting the Sound AVC (Auto Volume Control) This function adjust sound volume level automatically depending on the source. 1 Press Menu/Set button to display the main Sound OSD menu. 2 Select the Sound main menu. 3 Press Menu/Set button to enter the sub menu. 4 Select AVC. Then the cursor moves into the ➛❿ parts.
Setting the Sound SRS (Sound Retrieval System) 1 Press Menu/Set button to display the main Sound OSD menu. 2 Select the Sound main menu with button on the remote control. 3 Press Menu/Set button to enter the sub menu. 4 Select SRS and press Menu/Set button to enter Balance ➛ Sound Mode ➛ User ❿ Spatial Effect ➛ Off ❿ AVC ➛ On ❿ MTS ➛ Stereo ❿ SRS ➛ Off ❿ ❿ 1 the sub menu. Then the SRS sub menu appear. 5 Select the TSXT format with Move and press Menu/Set button.
Setting the Others In Setup Menu, you can adjust the transparency of the OSD menu and set PIP and others. Adjusting the Transparency of the OSD Window Adjust the transparency of the OSD menu. There are 8 steps from 0 to 7. 1 Press Menu/Set button to display the main Setup OSD menu. Transparency 2 Select the Setup main menu with button on the remote control. ➛ 0 ❿ ➛ 0 ❿ PIP Advanced 3 Press Menu/Set button to enter the sub menu. Set ID 4 Select Transparency.
Setting the Others Changing the Size in PIP Change the size of the PIP window. There are 3 sizes: Small, Large, Twin. 1 Select Size and press Menu/Set button. 2 Adjust size function with Small button and press Menu/Set button. Large Twin Changing the Source in PIP Change the source of the PIP window. 1 Select Source and press Menu/Set button to enter the sub menu. Then the PIP sub menu appear.
Setting the Others 1. Type1 Main ANALOGUE TV DIGITAL TV VIDEO1 VIDEO2 S-VIDEO/AV COMPONENT1 COMPONENT2 PC DVI HDMI PIP ANALOGUE TV DIGITAL TV VIDEO1 VIDEO2 S-VIDEO/AV COMPONENT1 COMPONENT2 PC DVI HDMI – – – – – – – – – – – – – – – – – – – – – – – – 2.
Setting the Others Position in PIP PIP Change the position of the PIP window. 1 Select Position with button on the remote control and press Menu/Set button to enter the sub menu. Then the PIP sub menu appear. Size ➛ Small ❿ Source ➛ VIDEO ❿ ➛ Right Down ❿ Picture Swap Position 2 In sub menu, there are four positions. Move Select the position with button on the remote control and press Exit button.
Setting the Time Language in Advanced Set the language to use in OSD. Supported languages are English, French, German, Spanish, Italian. 1 Select Language and press Menu/Set button. 2 Choose the Language with Advanced Language ➛ English ❿ Blue Back ➛ Off ❿ Front Key Lock ➛ Off ❿ button and press Exit button. Move Enter Exit Blue Back in Advanced You can set to display blue-color screen instead of noise screen. 1 Select Blue Back. Then the cursor moves into the ➛❿ part.
Setting the Time In the Time Menu, you can set the current time and auto power On/Off. Time Mode Set the current time. 1 Press Menu/Set button to display the main Time OSD menu. 2 Select the Time main menu. 3 Press Menu/Set button to enter the sub menu. Time Mode ➛☎ Auto ❿ Time Zone ➛☎ NSW/ACT ❿ Time Set On Time 4 Select Time Mode by pressing Menu/Set button. On Volume 5 Set the time mode with Sleep button.
Setting the Time In the Time Menu, you can set the current time and auto power On/Off. Setting the Current Time Set the current time. 1 Press Menu/Set button to display the main Time OSD menu. 2 Select the Time main menu. 3 Press Menu/Set button to enter the sub menu. Time Mode ➛☎ Manual ❿ Time Zone ➛☎ NSW/ACT ❿ Time Set On Time 4 Select Time Set by pressing Menu/Set button.
Setting the Time Setting the On Volume Set the sound volume level when TV power on automatically. Available only when the time is set and On Time is ON. 1 Press Menu/Set button to display the main Time OSD menu. 2 Select the Time main menu with button on the remote control. 3 Press Menu/Set button to enter the sub menu. 4 Select On Volume. Time Mode ➛☎ Manual ❿ Time Zone ➛☎ NSW/ACT ❿ Time Set AM - - : - - On Time AM - - : - - Off ➛ On Volume Off Time ➛ Sleep 5 Enter to the ➛❿ part.
Setting the Time Setting the Off Time This TV can be set to turn off automatically at specific times that you choose. Before using the timer, you must set the TV's clock as described previously. Time 1 Press Menu/Set button to display the main OSD menu. 2 Select the Time main menu with button Time Mode ➛☎ Manual ❿ Time Zone ➛☎ NSW/ACT ❿ Time Set on the remote control. AM - - : - - On Time 3 Press Menu/Set button to enter the sub menu.
OSD Menu Tree Picture Mode Contrast Brightness Color Sharpness Tint (Only For NTSC) Recall Standard Vivid Mild User Temperature WARM2, WARM1, NORMAL, COOL1, COOL2 Color Enhancer Color Enhancer On/Off Video NR Video NR On/Off Aspect Ratio 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3 Black Enhancer Black Enhancer On/Off Sound Balance Sound Mode Standard Movie Music News User Equalizer (Press Set) BBE VIVA (Optional) Spatial Effect AVC AVC On/Off MTS Mono, Stereo, SAP SRS (Optional) 60 Spatial Effect On/
OSD Menu Tree Setup Transparency PIP Size Off, Small, Large, Twin Source Picture Swap Position Right Down, Right Up, Left Up, Left Down Advanced Language National Selections Blue Back Blue Back On/Off Front Key Lock Set ID Front Key Lock On/Off 0 ~ 99 Time Time Mode Time Zone Time Set On Time On Volume Off Time Sleep On Time On/Off 1 ~ 100 Off Time On/Off Off, 10, 20, 30, 60, 90, 120, 150, 180 min Channel Digital TV Setup Preferred Audio Type, Channel Favourites, Manual Channel Scan, Test Rece
OSD Menu Tree PC MODE Picture Mode Contrast Brightness Color Sharpness Tint (Only For NTSC) Recall Standard Vivid Mild User Temperature WARM2, WARM1, NORMAL, COOL1, COOL2 Position Video NR On/Off H-Position V-Position H-Size Phase Auto Adjust 1366 Mode 16:9, 4:3 Aspect Ratio Sound Balance Sound Mode Standard Movie Music News User Equalizer (Press Set) BBE VIVA (Optional) Spatial Effect AVC 62 Spatial Effect On/Off AVC On/Off 100Hz, 500Hz, 1.
OSD Menu Tree Setup Transparency PIP Size Off, Small, Large, Twin Source Picture Swap Position Right Down, Right Up, Left Up, Left Down Advanced Language National Selections Blue Back Blue Back On/Off Front Key Lock Set ID 0 ~ 99 Scroll Mode On/Off Front Key Lock On/Off Time Time Mode Time Zone Time Set On Time On Volume On Time On/Off 1 ~ 100 Off Time Sleep Off, 10, 20, 30, 60, 90, 120, 150, 180 min 63
Troubleshooting Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money. Problem No picture & No sound Picture Ok & No sound • Press the VOL ( ) button. • Check the audio input signal. The remote control doesn't work • Check to see if there is any object between the Plasma Display and the remote control causing obstruction. • Check to see if the batteries are installed with the correct polarities.
Specification - 26" LCD 26" LCD TV Function and Display Specification Display Size 26-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 1366 X 768 Physical Pixel Contrast Ratio 1200 : 1 Brightness 600 cd/m2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digital/Motion-Adaptive De-interlace pr
Specification - 32" LCD 32" LCD TV Function and Display Specification Display Size 32-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 1366 X 768 Physical Pixel Contrast Ratio 3000 : 1 Brightness 500 cd/m2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digital/Motion-Adaptive De-interlace pr
Specification - 37" LCD ( Plastic Model ) 37" LCD TV (Plastic Model) Function and Display Specification Display Size 37-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 1366 X 768 Physical Pixel Contrast Ratio 5000 : 1 Brightness 500 cd/m 2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digi
Specification - 42" LCD 42" LCD TV Function and Display Specification Display Size 42-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 1366 X 768 Physical Pixel Contrast Ratio 5000 : 1 Brightness 500 cd/m 2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digital/Motion-Adaptive De-interlace p
Specification - 42" PDP 42" Plasma TV Function and Display Specification Display Size 42-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 852 X 480 Physical Pixel Contrast Ratio 10000 : 1 Brightness 1500 cd/m 2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digital/Motion-Adaptive De-interla
Specification - 42" PDP ( Plastic Model ) 42" Plasma TV (Plastic Model) Function and Display Specification Display Size 42-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 852 X 480 Physical Pixel Contrast Ratio 10000 : 1 Brightness 1500 cd/m 2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion
Specification - 42" PDP 42" Plasma TV Function and Display Specification Display Size 42-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 1024 X 768 Physical Pixel Contrast Ratio 10000 : 1 Brightness 1500 cd/m 2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digital/Motion-Adaptive De-interl
Specification - 42" PDP ( Plastic Model ) 42" Plasma TV (Plastic Model) Function and Display Specification Display Size 42-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 852 X 480 Physical Pixel Contrast Ratio 10000 : 1 Brightness 1500 cd/m 2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion
Specification - 50" PDP 50" Plasma TV Function and Display Specification Display Size 50-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 1366 X 768 Physical Pixel Contrast Ratio 3000 : 1 Brightness 1000 cd/m 2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digital/Motion-Adaptive De-interla
Specification - 50" PDP ( Plastic Model ) 50" Plasma TV (Plastic Model) Function and Display Specification Display Size 50-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 1366 X 768 Physical Pixel Contrast Ratio 3000 : 1 Brightness 1000 cd/m 2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion
Specification - 63" PDP 63" Plasma TV Function and Display Specification Display Size 63-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 1366 X 768 Physical Pixel Contrast Ratio 1000 : 1 Brightness 800 cd/m 2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digital/Motion-Adaptive De-interlac