Digital Wireless Weather Station OPERATING INSTRUCTION Base unit: WT2076 Wireless sensor: WT2022A Remove the protective film from the display before use.
Safety Read the following advice carefully and store these operating instructions in case you want to reread something later. If you give the item to someone else, give them these operating instructions as well.
• Do not modify the items or the power cable. Only allow repairs to be carried out by a specialist workshop as improperly repaired devices endanger the user. Unpacking and checking 1. Remove the weather station from the packaging, remove all protective films and keep the packaging materials out of the reach of children. 2. Dispose of the materials separately according to type. 3.
Wireless sensor • Range of up to 262.
Base unit –Back Detachable base - How to plug in power adaptor? Please put the adaptor line through the hole [ 5 ] and plug it into power socket [ 3]. After this step, please assemble the detachable base to the base unit backside.
Operating elements and parts of the base unit 1 Operating buttons Button MODE * Switch temperature unit (°C or °F) * Activate settings mode * Save changes to settings Button CH * Display weather data from various wireless sensors ( channel 1.2.
Wireless sensor 1 Red pilot light 2 Loop for hanging 3 Sliding switch 1 2 3: Set sensor number (transmission channel) 4 Battery compartment If you wish to use only the wireless sensor included in the delivery, as a general rule, the transmission channel does not need to be changed. This is only necessary if you wish to use additional wireless sensors; see “ Using additional wireless sensors ”.
- If possible, use alkaline batteries instead of zinc-carbon batteries. Alkaline batteries last longer, particularly outside in low temperatures. Using addition wireless sensors The weather station comes with one wireless sensor. However, you can operate the weather station with up to three wireless sensors. Additional wireless sensors are available via our Amazon online shop. • The wireless sensors can be located in different rooms or outdoors.
Set weather symbol manually After the base unit power on, the weather symbol will flash on the display. 1. Set the appropriate weather symbol with the UP and DOWN buttons. 2. Press the SNOOZE•LIGHT button to select. Information: The weather symbol can set Sunny, partly sunny, cloudy, rainy and heavy rain manually, snow symbols will be displayed when outdoor temperature is below -30.2°F. The weather symbol will only be automatically displayed 24 hours later.
- The wireless sensor is protected against moisture but must be protected against water, e.g. rain. General The base unit and wireless sensor exchange information over a radio frequency. For this reason, the location is important for the range of the wireless connection. Note: • The maximum distance between the base station and wireless sensor is 262.5 ft (80 meters). However, this range is only possible in open area.
Time function Alarm function The base unit allows you to set two different alarm times. For example, you can set an alarm for the morning and for after an afternoon nap by activating both alarm times. 1. Use the ALARM button to select the desired alarm time (A1 or A2). 2. Hold and press the ALARM button for approx. 2 seconds once you have chosen the desired alarm time. The hour indicator of the alarm time (A1 or A2) will flash. 3. Set the desired hour for the alarm with the UP and DOWN buttons. 4.
On ALARM 1: • press UP once: on the display, A1 is activated • press UP twice: disappear, A1 is deactivated On ALARM 2: • press UP once: on the display, A2 is activated • press UP twice: disappear, A2 is deactivated Stopping the alarm You will be woken by the alarm at the set time, and the sound will become more and more intense as the alarm continues. • Snooze - Press the SNOOZE•LIGHT button to stop the alarm for approx. 5 minutes.
1 Current transmission channel to the base unit 2 Mold indicator 3 Dew point 4 Heat index 5 Low battery indicator 6 Humidity in percent 7 Humidity trend 8 Temperature unit: °C or °F 9 Temperature 10 Radio frequency reception symbol 11 Stored maximum and minimum values 12 Trend for temperature 1 Indoor symbol 2 Mold indicator 3 Comfort indicator 4 Low battery indicator 5 Humidity in percent 6 Humidity trend 7 Temperature unit:°F or °C
8 Temperature 9 Stored maximum and minimum values 10 Trend for temperature The highest and lowest temperature and humidity values by repeatedly pressing the UP button. • press once: the maximum values are shown • press again: the minimum values are shown • press again: returns to normal display Press and hold the UP button to delete the highest and lowest temperature and humidity values since midnight. Information: The weather station also has a temperature alarm.
Weather forecast After setting up initially, the weather forecast can not be used for about 12 hours, as the weather station needs this time to collect and evaluate the weather data. The weather forecast is a result of the collected data and the measured changes in air pressure. The forecast refers to the area around the weather station with a radius of about 30 to 50 km for the next 12 to 24 hours. The accuracy of the weather forecast is around 75 %.
falling air pressure = weather will get worse Mold indicator, dew-point display and heat index Keep pressing the DOWN button to display the corresponding values one after another. Mold indicator (display for indoors and outdoors) The mold indicator (“MOLD” on the display) is comprised of the temperature and humidity. The indicator displays how likely it is that mold will start to grow.
Comfort symbol Temperature range 14.2°F~ 122°F 68°F ~ 82.4°F 14.2°F~ 122°F Humidity range < 40% 40% ~ 70% >70% Degree of environment Dry Comfortable Wet Dry: When the indoor humidity is below 40% and temperature is within 14.2°F to 122°F range, it indicates the indoor environment is dry, the symbol will appear. Comfortable: When the indoor temperature is within 68°F to 82.
Switching the light on A) Battery operation Press any buttons to light up the display for 10 seconds. B) Power mains operation When the base unit is powered through the power adapter and the power mains, the display is constantly illuminated. Press the SNOOZE•LIGHT button repeatedly to select the following settings for the display illumination: Bright >> Muted >> Off. Low battery indicator For the base unit and the wireless sensor, there is a separate low battery indicator.
Troubleshooting Please contact our customer support team with any questions. You can leave us a message on Amazon or contact us directly via email: wittime_sales1@163.com Problem Possible cause and remedy Check the batteries in main unit are inserted or power adaptor is Display screen not working. The temperature from plugged in correctly the sensor seems to be too high. - Check if the sensor is exposed to direct sunlight. The display shows HH, LL, HH.H or LL.
Humidity measuring accuracy:+/- 2 % with a measuring range of 20% to 80%, +/-4% with measuring range of 1% to 19% and 81% to 99% Resolution: 1 % Wireless sensor Model: WT2022A Batteries: 2 x LR06 type (AA) 1.
Disclaimers Manufacturer reserves the right to change specifications of the product. Manufacturer and supplier are not responsible for malfunction where interference occurs.