FWS-2275E3-A10-00
FCC warning Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules.
Overview Designed to offer customers more choice and allow AAEON to respond more quickly to requests for customized systems, the FWS-2275 board and Virtual Customer Premise Equipment (vCPE) technology, Unified Threat Management (UTM), Virtual Private Networking (VPN), Intrusion Detection and Prevention Systems (IDS, IPS), Firewall technology, and Load Balancing applications. The FWS-2275 is powered by an Intel® Celeron® Processor N3350 processor and has onboard LPDDR4 2GB memory and 16GB eMMC.
Wifi Onboard WiFi 802. 11 b/g/n 2X2, BT4. 1 miscellaneous RTC Internal RTC Watchdog Timer 1~255 steps by software programmable TPM (TPM v1.2 9660/TPM2.
Outlook_ Rear side Outlook_ Front side
Installation 1. Put the FWS-2275 on the table and find 3 network routes to connect the LAN port to the broadband sharer. 2. Set the internal IP of the sharer. Otherwise, the default value of the sharer can be used. Most of them are 192.168.11.X or 192.168.3.X. This X is the IP that is automatically assigned to each sharer. Note Most of the sharers use 192.168.X.1 as the IP of Gateway. 3. Consider the server to provide those services, the IP of the server (mostly the IP of 192.168.X.
