Instruction Manual

ManualsBrandsAnyTone ManualsElectronicsCB Radio

1.KNOW ABOUT THIS RADIO 2.HOW TO USE THIS RADIO

1 2

CB RADIO

SMART

Instruction Manual

Squelch control, SQ, ASQ switch key

Mode/Scan key

RF Gain control

CH9/CH19/Keypad lock/VOX control/VOX setting

Power On/Off Volume control

LCD

External speaker Jack

Antenna Jack

2.4

Squelch level control(O.F to 3.4 level available)

...........................

2.5

ASQ control(A.1-A.9 level available)

..............................................

Short press

, until LCD displays SQ and then displays X.X, X.X

stands for SQ level, the bigger value stands for high squelch level.

Short press [ UP ] or [ DN ] to change SQ level.

Hold [ UP ] or [ DN ] can fast change SQ level.

Short press

or wait for 3 seconds to store and exit.

Note：The»higher»SQ»level»selected,»the»stronger»signal»required»to»

open»speaker»and»hear»the»calling.

Hold

key, until LCD displays AQ, the ASQ function turned on. The

LCD will displays "A.X", "X" stands for the ASQ level, the bigger value

stands for high squelch level.

Short press microphone [ UP ] or [ DN ] to change ASQ level

Hold microphone [ UP ] or [ DN ] can fast change ASQ level.

Short press

or wait for 3 seconds to store and exit.

Note：The»higher»ASQ»level»selected,»the»stronger»signal»required»to»

open»speaker»and»hear»the»calling.

2.3

Channel Control

..................................................................................

Short press microphone [ UP ] or [ DN ] to change working channel.

Hold microphone

[ UP ] or [ DN ] can fast change working channel.

2.1

Power On/Off the Radio

....................................................................

2.2

Volume control

....................................................................................

Turn VOL switch clockwise to power on the radio, the LCD displays the

Norms and then displays channel number.

Turn VOL switch anti-clockwise, until hear Ka Ta, the radio is powered

off.

Turn clockwise to increase volume, anti-clockwise to decrease volume.

Qixiang Electon Science & Technoloyg Co.,Ltd.

www.anytone.net

VOX

1 2 3

Note:

Ant : Tx/ Rx 26.965-27.405Mhz ,

To get the best range from the external whip antenna (50 ) should be used.

0 dBi nominal (3dBi Max)

Summary of content (3 pages)

PAGE 1
.KNOW ABOUT THIS RADIO 2.HOW TO USE THIS RADIO 2.1 Power On/Off the Radio.................................................................... 1. Turn VOL switch clockwise to power on the radio, the LCD displays the Norms and then displays channel number. 6 2. Turn VOL switch anti-clockwise, until hear Ka Ta, the radio is powered off. 5 SMART 2.2 Volume control....................................................................................
PAGE 2
.HOW TO USE THIS RADIO 2.HOW TO USE THIS RADIO 2.6 Mode control ....................................................................................... 1. Short press key to switch between AM /FM mode. 2. The LCD displays the selected mode. 2.7 RF Gain contro .................................................................................... 1. Short press flashes. key, LCD displays RFG and the present RF gain level 2. Short press microphone [ UP ] or [ DN ] to change level. 3.
PAGE 3
4.FCC STATEMENT 4.FCC STATEMENT ■FCC Compliance Statements: ■Licensing Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Use our radio in USA is subject to the rules & regulations of FCC.