Asset Tag Users Manual (AGT-100D) CDMA ASSET TAG Users Manual July, 2006 AGT-100D – v 1.3 AnyDATA AnyTime AnyPlace Any Wireless Data Solutions™ All Rights Reserved.
Asset Tag Users Manual (AGT-100D) AnyDATA CDMA AGT-100D Copyright © 2005 AnyDATA Corp. All Rights Reserved. Any part of this document may not be distributed, communicated, reproduced or transmitted in any form or by any means, electronic or mechanical or otherwise, for any purpose, without the permission of AnyDATA Corp. This document can be subjected to revision without further notice. Contact Address Headquarter AnyData Corporation 18902 Bardeen Ave, lrvine, CA 92612-1522 U.S.A. http://www.anydata.
Asset Tag Users Manual (AGT-100D) Contents Contents ................................................................................................................................ 3 Figures .................................................................................................................................. 4 Tables .................................................................................................................................... 4 1 Introduction ..............................
Asset Tag Users Manual (AGT-100D) Figures Figure 2.1: Package Contents ..........................................................................................6 Figure 2.2: External Interface ......................................................................................7 Figure 2.3: LEDs ...................................................................................................................7 Figure 4.1: RS-232C Cable w/ Power Adaptor ....................................................
Asset Tag Users Manual (AGT-100D) 1 INTRODUCTION 1.1 PURPOSE This manual discusses the purpose and usage of the Asset Tag (AGT-100D). 1.2 TECHNICAL DETAIL Please refer to Technical Manual.pdf for a more detailed description of the AGT-100D 1.3 REVISION HISTORY The revision history for this manual is shown in Table 1.1. Table 1.
Asset Tag Users Manual (AGT-100D) 2 PHYSICAL CONTENTS Figure 2.1: Package Contents The box should contain: One AGT-100D Asset Tag One ATG-100D Belt Clip One RS-232C Cable w/ Power Adaptor connecter One Power Adaptor One Wall Charger One Application/Manual CD If any of items on Figure 1.1 are missing, please contact AnyDATA. All Rights Reserved.
Asset Tag Users Manual (AGT-100D) Power GEO Fence Set / CDMA Status External Battery Custom RS-232C Figure 2.2: External Interface Power Led GEO Fence / CDMA Status Led Figure 2.3: LEDs All Rights Reserved.
Asset Tag Users Manual (AGT-100D) 3 DESCRIPTION: ASSET TAG The Asset Tag is a CDMA position reporting device that will let you keep track of your most important assets. By using the following features, the device can be used to track packages, people, and even pets. Continuous Tracking – This application will allow you to keep a close watch on your important asset. The device will connected to a webbased application and provide you up to date information on its current position.
Asset Tag Users Manual (AGT-100D) the company supporting the device). When the user is allowed to set a Geo Fence, the server will only have permission to configure the Interval and/or Radius of the user-defined Geo Fence. Only the user can turn the Geo Fence ON and OFF. All Rights Reserved.
Asset Tag Users Manual (AGT-100D) 4 CHARGING ASSET TAG THE 4.1 RS-232C CABLE W/ POWER ADAPTOR CONNECTER 1. Connect the power adaptor to the RS-232C Cable (See Figure 4.1). 2. Connect the RS-232C Cable to the bottom of the Asset Tag (See Figure 4.2). 3. Plug power adapter to an outlet (The RS-232C cable does not need to be plugged in the computer for the Asset Tag to charge). 4. The Red LED should turn to indicate the Asset Tag is charging. 4.2 WALL CHARGER 1.
Asset Tag Users Manual (AGT-100D) Figure 4.2: Asset Tag w/ External Power All Rights Reserved.
Asset Tag Users Manual (AGT-100D) 5 POWERING ON/OFF THE ASSET TAG 5.1 POWERING ON Press the PWR button to power up the Asset Tag. The Red LED will blink once indicating the Asset Tag is powering up. 5.2 POWERING OFF Press and hold the PWR button for approx. 2 seconds to power down the Asset Tag. Both the Red LED and Blue LED will turn off during the power down procedure. Both LEDs will turn off when the Asset Tag has powered down. 5.
Asset Tag Users Manual (AGT-100D) Reset Hole Figure 5.1: Reset Button All Rights Reserved.
Asset Tag Users Manual (AGT-100D) 6 CHECKING THE ASSET TAG STATUS To check the current status of the Asset Tag, press the SET button while the device is turned on. Both LEDs will blink showing the current status of the Asset Tag. Table 6.1 below describes the CDMA status, and Table 6.2 describes the Battery Status. 6.1 CDMA STATUS (RED LED) Table 6.1: CDMA Status (Red LED) # of blink Description 1 Idle 2 In use 3 No service / Offline 6.2 BATTERY STATUS (BLUE LED) Table 6.
Asset Tag Users Manual (AGT-100D) 7 GEO FENCE ON/OFF (OPTIONAL) GEO Fence #1 may be turned on and off by pressing and holding the set button on the device. NOTE: This feature will be enabled/disabled by the application provider. 7.1 SET GEO FENCE ON Press and hold the SET button for approx 3 seconds. The GEO Fence LED will blink continuously while it sets the origin. If the origin is set, the LED will stay ON, if it fails, the led will turn OFF. 7.
Asset Tag Users Manual (AGT-100D) 8 ALERT MESSAGE (OPTIONAL) This feature will send an alert message with the current position to the application provider. To send the Alert Message, press the “Set” button 2 consecutive times (within 3 seconds). The device will then attempt to obtain the current position and report it to the application provider. When received, the application will do the appropriate processing. NOTE: This feature will be enabled/disabled by the application provider.