VEHICLE TRACKER Users Manual (ACT613) W CDM A VEHI CLE TRACKER Users Manual June, 2014 ACT613, V0.3 AnyDATA AnyTime AnyPlace Any Wireless Data Solutions™ All Rights Reserved.
VEHICLE TRACKER Users Manual (ACT613) AnyDATA WCDMA ACT613 Copyright © 2009 AnyDATA Corp. All Rights Reserved. Any part of this document may not be distributed, communicated, reproduced or transmitted in any form or by any means, electronic or mechanical or otherwise, for any purpose, without the permission of AnyDATA Corp. This document can be subjected to revision without further notice. Contact Address Headquarter AnyData Corporation 5 Oldfield, Irvine, CA 92618, http://www.anydata.
VEHICLE TRACKER Users Manual (ACT613) Contents Contents 3 Figures 3 Tables 4 1 Introduction Error! Bookmark not defined. 1.1 Purpose .................................................................................................................... 6 1.2 Technical Detail .................................................................................................. 6 1.3 Revision History ..................................................................................................
VEHICLE TRACKER Users Manual (ACT613) Figure 4.1: Installation of ACT613 in vehicle ....................................................... 11 Tables Table 1.1: Revision History .......................................................................................... 6 ! RF Exposure Warning: The radiated output power of this device is below the FCC radio frequency exposure limits.
VEHICLE TRACKER Users Manual (ACT613) La puissance de sortie rayonnée de cet appareil est inférieure aux limites d'exposition de radio de fréquence IC. Néanmoins, le dispositif doit être utilisé de telle manière que le potentiel de contact humain pendant l'utilisation normale soit minimisé. Afin d'éviter la possibilité de dépasser la limite d'exposition de fréquence radio de la IC, la proximité humaine à l'antenne ne doit pas être inférieure à 20 cm. All Rights Reserved.
VEHICLE TRACKER Users Manual (ACT613) 1 INTRODUCTION 1.1 PURPOSE This manual discusses the purpose and usage of the Vehicle GPS Locator (ACT613). 1.2 TECHNICAL DETAIL Please refer to Technical Manual.pdf for a more detailed description of the ACT613. 1.3 REVISION HISTORY The revision history for this manual is shown in Table 1.1. Table 1.1: Revision History Version Date Description V 0.1 V 0.2 Initial Release – ACT613 Added French statements All Rights Reserved.
VEHICLE TRACKER Users Manual (ACT613) 2 PHYSICAL CONTENTS Figure 2.1: Package Contents The box should contain: • One ACT613 Vehicle GPS Tracker • One User Guide All Rights Reserved.
VEHICLE TRACKER Users Manual (ACT613) 3 DESCRIPTION: VEHICLE GPS LOCATOR (ACT613) 3.1 THE LATEST VEHICLE TRACKER IN GPS TECHNOLOGY Utilizing both assisted and standalone GPS, ACT613 is able to determine your location via a combination of cell triangulation and the greatest number of GPS satellites available. Alerts & Messages ACT613 has no button for user-set alert functions; the LBS (Location based server) can only know the device location and alerts including the vehicle information. 3.
VEHICLE TRACKER Users Manual (ACT613) Figure 3.1: External Interface 3.4 VEHICLE DOOR LOOK/UNLOCK The ACT613 aftermarket equipped a automotive WITH REMOTE CONTROL FROM CLOUD SERVER replacement keyless remote entry for systems original (RKE). The equipment and features and functions associated with each of the six channels of the RKE are dependent on the year, make and model of the vehicle.
VEHICLE TRACKER Users Manual (ACT613) Bluetooth can be used for vehicle door lock/unlock control. Bluetooth available smart phone can be paired to the device. Once paired user can lock/unlock the vehicle using the application one the smart phone. Please visit to http://delphi.com/ for more details on Bluetooth use cases. All Rights Reserved.
VEHICLE TRACKER Users Manual (ACT613) 4 HANDING THE VEHICLE GPS LOCATOR 4.1 SET-UP 1. Most of vehicle has an OBD-II (On Board Diagnostics) connector, which is located within 2 feet of the steering wheel. 2. The installation is very easy, just put the ACT613 to the OBD-II connector in user vehicle. 3. The ACT613 will power on automatically from vehicle battery and start initiation for WCDMA network access. 4. After install of device to vehicle, all services are served by server. Figure 4.
VEHICLE TRACKER Users Manual (ACT613) 5 POWERING ON/OFF THE VEHICLE GPS LOCATOR 5.1 POWERING ON/OFF To Power ON: 1. Insert the device to OBD-II connector. 2. Then, the device has automatically powered on according to vehicle condition. 3. There is no visual way to confirm whether device has power-on or not. 4. But, user can make sure the location from web-server, or application. To Power OFF: 1. If the device is needed for totally power-off, then just remove it from the OBD-II connector. 2.
VEHICLE TRACKER Users Manual (ACT613) 6 VEHICLE GPS LOCATOR SPECIFICATIONS 6.1 FORM FACTOR • Dimensions : 80 x 45 mm, 22mm in Height • Weight 66.5g 6.2 HARDWARE SPECIFICATIONS • Assisted & Standalone GPS • Operating Voltage 9 ~ 18V, (internally 3.5V for WCDMA RF) • Max Output Power 0.3W • Current Consumption Idle mode (50mA @ 12V) • Light Sleep Mode (20mA @ 12V) • Deep Sleep Mode (4mA @ 12V) • Sensitivity Less than -104dBm • Receive Frequency 1930 ~ 1990MHz for B2, 869 ~ 894MHz for B5.
VEHICLE TRACKER Users Manual (ACT613) 7 LIMITATIONS AnyDATA OF LIABILITY expressly interruption, assumes deletion, no responsibility defect, delay in for any operation error, or omission, transmission, communications failure, theft or destruction or unauthorized access to, or alteration of, any use of the AnyDATA Locating Service through the Internet or other communication services.