4G Vehicle Tracker with Hotspot user Manual (ACT233L) 4G Vehicle Tracker with Hotspot Users Manual APRIL, 2013 ACT233L, V1.0 AnyDATA AnyTime AnyPlace Any Wireless Data Solutions™ All Rights Reserved.
4G Vehicle Tracker with Hotspot user Manual (ACT233L) AnyDATA ACT233L Copyright © 2009 AnyDATA Corp. All Rights Reserved. Any part of this document may not be distributed, communicated, reproduced or transmitted in any form or by any means, electronic or mechanical or otherwise, for any purpose, without the permission of AnyDATA Corp. This document can be subjected to revision without further notice. Contact Address Headquarter AnyData Corporation 5 Oldfield, Irvine, CA 92618, http://www.anydata.
4G Vehicle Tracker with Hotspot user Manual (ACT233L) Contents Contents 3 Figures 3 Tables 4 1 Introduction 5 1.1 Purpose ......................................................................................................................... 5 1.2 Technical Detail ...................................................................................................... 5 1.3 Revision History ......................................................................................................
G Vehicle Tracker with Hotspot user Manual (ACT233L) Tables Table 1.1: Revision History .............................................................................................. 5 RF Exposure Warning: The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized.
4G Vehicle Tracker with Hotspot user Manual (ACT233L) 1 INTRODUCTION 1.1 PURPOSE This manual discusses the purpose and usage of the 4G Vehicle Tracker with Hotspot(ACT233L). 1.2 TECHNICAL DETAIL Please refer to Operation Description.pdf for a more detailed description of the ACT233L. 1.3 REVISION HISTORY The revision history for this manual is shown in Table 1.1. Table 1.1: Revision History Version Date Description V 1.0 APR 2013 Initial Release – ACT233L All Rights Reserved.
4G Vehicle Tracker with Hotspot user Manual (ACT233L) 2 PHYSICAL CONTENTS Figure 2.1: Package Contents The box should contain: One ACT233L 4G Vehicle Tracker with Hotspot One User Guide All Rights Reserved.
4G Vehicle Tracker with Hotspot user Manual (ACT233L) 3 DESCRIPTION: 4G VEHICLE TRACKER 3.1 THE LATEST VEHICLE TRACKER IN WITH HOTSPOT GPS TECHNOLOGY Utilizing both assisted and standalone GPS, ACT233L is able to determine your location via a combination of cell triangulation and the greatest number of GPS satellites available. 3.
4G Vehicle Tracker with Hotspot user Manual (ACT233L) Figure 3.1: External Interface 3.5 VEHICLE DOOR LOOK/UNLOCK The ACT233L aftermarket equipped automotive a WITH REMOTE CONTROL FROM CLOUD SERVER replacement keyless entry remote for systems original (RKE). The equipment and features and functions associated with each of the six channels of the RKE are dependent on the year, make and model of the vehicle.
4G Vehicle Tracker with Hotspot user Manual (ACT233L) 3.6 VEHICLE DOOR LOCK/UNLOCK WITH REMOTE CONTROL THROUGH BLUETOOTH Bluetooth can be used for vehicle door lock/unlock control. Bluetooth available smart phone can be paired to the device. Once paired user can lock/unlock the vehicle using the application one the smart phone. Please visit to http://delphi.com/ for more details on Bluetooth use cases. All Rights Reserved.
4G Vehicle Tracker with Hotspot user Manual (ACT233L) 4 HANDING THE 4G VEHICLE TRACKER WITH HOTSPOT 4.1 SET-UP 1. Most of vehicle has an OBD-II (On Board Diagnostics) connector, which is located within 2 feet of the steering wheel. 2. The installation is very easy, just put the ACT233L to the OBD-II connector in user vehicle. 3. The ACT233L will power on automatically from vehicle battery and start initiation for CDMA or LTE network access. 4.
4G Vehicle Tracker with Hotspot user Manual (ACT233L) server via the CDMA or LTE network. 5 POWERING ON/OFF THE 4G VEHICLE TRACKER WITH HOTSPOT 5.1 POWERING ON/OFF To Power ON: 1. Insert the device to OBD-II connector. 2. Then, the device has automatically powered on according to vehicle condition. 3. There is no visual way to confirm whether device has power-on or not. 4. But, user can make sure the location from web-server, or application. To Power OFF: 1.
4G Vehicle Tracker with Hotspot user Manual (ACT233L) 6 4G VEHICLE TRACKER WITH HOTSPOT SPECIFICATIONS 6.1 FORM FACTOR Dimensions : 80 x 55 mm, 22mm in Height Weight 78.4g 6.2 HARDWARE SPECIFICATIONS Full TIA/EIA/IS-98D/3GPP R8 LTE Compliance Assisted & Standalone GPS Operating Voltage 9 ~ 18V, (internally 3.5V for CDMA RF) Max Output Power 0.3W Light Sleep Mode (4mA @ 13.5V) Deep Sleep Mode (2mA @ 13.
4G Vehicle Tracker with Hotspot user Manual (ACT233L) 6.4 EXTERNAL INTERFACE OBD-II Micro USB (Type B) 6.