Personal GPS Locator Users Manual (ACT231) CDMA VEHICLE TRACKER Users Manual July, 2012 ACT231, V0.3 AnyDATA AnyTime AnyPlace Any Wireless Data Solutions™ All Rights Reserved.
Personal GPS Locator Users Manual (ACT231) AnyDATA CDMA ACT231 Copyright © 2009 AnyDATA Corp. All Rights Reserved. Any part of this document may not be distributed, communicated, reproduced or transmitted in any form or by any means, electronic or mechanical or otherwise, for any purpose, without the permission of AnyDATA Corp. This document can be subjected to revision without further notice. Contact Address Headquarter AnyData Corporation 5 Oldfield, Irvine, CA 92618, http://www.anydata.
Personal GPS Locator Users Manual (ACT231) Contents Contents 3 Figures 4 Tables 4 1 Introduction 5 1.1 Purpose ......................................................................................................................... 5 1.2 Technical Detail ...................................................................................................... 5 1.3 Revision History ......................................................................................................
Personal GPS Locator Users Manual (ACT231) Figures Figure 2.1: Package Contents ............................................................................................... 6 Figure 3.1: External Interface .......................................................................................... 8 Figure 4.1: Installation of ACT231 in vehicle ......................................................... 10 Tables Table 1.1: Revision History ..................................................................
Personal GPS Locator Users Manual (ACT231) Information to user (Industry Canada license-exempt RSS standards) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. 1 INTRODUCTION 1.
Personal GPS Locator Users Manual (ACT231) 2 PHYSICAL CONTENTS Figure 2.1: Package Contents The box should contain: One ACT231 Vehicle GPS Tracker One User Guide All Rights Reserved.
Personal GPS Locator Users Manual (ACT231) 3 DESCRIPTION: VEHICLE GPS LOCATOR (ACT231) 3.1 THE LATEST VEHICLE TRACKER IN GPS TECHNOLOGY Utilizing both assisted and standalone GPS, ACT231 is able to determine your location via a combination of cell triangulation and the greatest number of GPS satellites available. ACT231 charges via the included USB wall charger. ACT231 is equipped with a battery life of 3-7 days with normal usage. 3.
Personal GPS Locator Users Manual (ACT231) Figure 3.1: External Interface 3.5 VEHICLE DOOR LOOK/UNLOCK The ACT231 aftermarket equipped a automotive WITH REMOTE CONTROL FROM CLOUD SERVER replacement keyless remote entry for systems original (RKE). The equipment and features and functions associated with each of the six channels of the RKE are dependent on the year, make and model of the vehicle.
Personal GPS Locator Users Manual (ACT231) 3.6 VEHICLE DOOR LOOK/UNLOCK WITH REMOTE CONTROL THROUGH BLUETOOTH Bluetooth can be used for vehicle door lock/unlock control. Bluetooth available smart phone can be paired to the device. Once paired user can lock/unlock the vehicle using the application one the smart phone. Please visit to http://delphi.com/ for more details on Bluetooth use cases. All Rights Reserved.
Personal GPS Locator Users Manual (ACT231) 4 HANDING THE VEHICLE GPS LOCATOR 4.1 SET-UP 1. Most of vehicle has an OBD-II (On Board Diagnostics) connector, which is located within 2 feet of the steering wheel. 2. The installation is very easy, just put the ACT231 to the OBD-II connector in user vehicle. 3. The ACT231 will power on automatically from vehicle battery and start initiation for CDMA network access. 4. After install of device to vehicle, all services are served by server. Figure 4.
Personal GPS Locator Users Manual (ACT231) 5 POWERING ON/OFF THE VEHICLE GPS LOCATOR 5.1 POWERING ON/OFF To Power ON: 1. Insert the device to OBD-II connector. 2. Then, the device has automatically powered on according to vehicle condition. 3. There is no visual way to confirm whether device has power-on or not. 4. But, user can make sure the location from web-server, or application. To Power OFF: 1. If the device is needed for totally power-off, then just remove it from the OBD-II connector. 2.
Personal GPS Locator Users Manual (ACT231) 6 VEHICLE GPS LOCATOR SPECIFICATIONS 6.1 FORM FACTOR Dimensions : 80 x 45 mm, 22mm in Height Weight 66.5g 6.2 HARDWARE SPECIFICATIONS Full TIA/EIA/IS-98D Compliance Assisted & Standalone GPS Operating Voltage 9 ~ 20V, (internally 3.5V for CDMA RF) Max Output Power 0.3W Current Consumption Idle mode (50mA @ 12V) Light Sleep Mode (20mA @ 12V) Deep Sleep Mode (4mA @ 12V) Sensitivity Less than -104dBm Receive Frequency 869.
Personal GPS Locator Users Manual (ACT231) 6.