Owner’s Manual Anthony Gallo Acoustics 20841 Prairie Street Chatsworth, CA 91311 USA Here Stamp Place www.roundsound.com Anthony Gallo Acoustics, 20841 Prairie Street, Chatsworth, CA 91311 USA Phone (818) 341-4488 • Fax (818) 341-2188 It is very important that you fill out the Warranty Information on the back of this card and return it to us. Or, go to https://www.roundsound.com/registration.php and register. This will ensure that you are eligible for our free four-year Extended Service Agreement.
Contents Introduction...........................................................................................1 Welcome to Anthony Gallo Acoustics ................................................1 Proprietary AGA Technology ...............................................................2 General Guidelines for Placing Your Classico CL-2s.............................4 Installation.............................................................................................8 Unpacking and Inspection .......
Introduction Welcome! We've worked hard to fill this manual with useful and helpful information. If you'll take a few minutes to read through it, the result will be easier system set up and better in-room sonic performance. It'll also help acquaint you with several unique features Anthony Gallo Acoustics Classico speakers offer that typical loudspeakers don't.
Introduction Welcome! We've worked hard to fill this manual with useful and helpful information. If you'll take a few minutes to read through it, the result will be easier system set up and better in-room sonic performance. It'll also help acquaint you with several unique features Anthony Gallo Acoustics Classico speakers offer that typical loudspeakers don't.
Proprietary AGA Technology The Classico Series was designed from the outset to deliver the exceptional performance AGA has become famous for while presenting a more traditional look. This makes it easy to incorporate our Classico series in practically any environment. All of the technology used in AGA products was specifically developed by Anthony Gallo and cannot be found in any other loudspeakers.
Proprietary AGA Technology The Classico Series was designed from the outset to deliver the exceptional performance AGA has become famous for while presenting a more traditional look. This makes it easy to incorporate our Classico series in practically any environment. All of the technology used in AGA products was specifically developed by Anthony Gallo and cannot be found in any other loudspeakers.
General Guidelines for Placing Your Classico CL-2s Note: The following positioning instructions are meant to be only a guideline for your CL-2 placement. Once your Classico CL-2s are properly broken in, they should perform to your satisfaction. If not, however, please refer to these simple placement guidelines for some helpful tips. No matter which placement option you choose, please keep the Classico CL-2 at least one inch from the wall or surface behind it.
General Guidelines for Placing Your Classico CL-2s Note: The following positioning instructions are meant to be only a guideline for your CL-2 placement. Once your Classico CL-2s are properly broken in, they should perform to your satisfaction. If not, however, please refer to these simple placement guidelines for some helpful tips. No matter which placement option you choose, please keep the Classico CL-2 at least one inch from the wall or surface behind it.
Surround Positioning: The CL-2 will make an ideal surround speaker in a multi-channel Classico setup. The primary surrounds are best placed to the sides of the listening area, approximately two feet above seated ear height and even with or a little behind the primary listening seats. If the room is long or if there are several rows of seating, more than one set of surrounds can be placed along the side walls. If you're installing secondary (rear) surrounds (i.e., a 7.
Surround Positioning: The CL-2 will make an ideal surround speaker in a multi-channel Classico setup. The primary surrounds are best placed to the sides of the listening area, approximately two feet above seated ear height and even with or a little behind the primary listening seats. If the room is long or if there are several rows of seating, more than one set of surrounds can be placed along the side walls. If you're installing secondary (rear) surrounds (i.e., a 7.
Installation Connecting Your Classico CL-2s Caution: Failure to turn off the receiver or amplifier and unplug it from the power outlet before connecting your speakers may cause damage to your system. You should always turn the receiver or amplifier off before making or changing any connections. Unpacking and Inspection Each Classico CL-2 and its accompanying owners' manual are packaged together in a single carton. Carefully inspect them immediately after unpacking.
Installation Connecting Your Classico CL-2s Caution: Failure to turn off the receiver or amplifier and unplug it from the power outlet before connecting your speakers may cause damage to your system. You should always turn the receiver or amplifier off before making or changing any connections. Unpacking and Inspection Each Classico CL-2 and its accompanying owners' manual are packaged together in a single carton. Carefully inspect them immediately after unpacking.
Speaker Settings in a Surround Sound Receiver or Processor If you are using a contemporary surround sound receiver or processor, you’ll need to set the speaker parameters properly to maximize your system's performance. After your speakers are properly connected, turn on the receiver or processor, enter the setup menu, and navigate to the speaker settings menu.
Speaker Settings in a Surround Sound Receiver or Processor If you are using a contemporary surround sound receiver or processor, you’ll need to set the speaker parameters properly to maximize your system's performance. After your speakers are properly connected, turn on the receiver or processor, enter the setup menu, and navigate to the speaker settings menu.
Classico CL-2 Specifications Frequency Response 39 Hz – 22 kHz ±3 dB in-room Impedance 4 Ohms, nominal Sensitivity 90 dB at 2.83 volts, 1 meter Power Handling 100 watts undistorted amplifier power Minimum Suggested Power 15 watts RMS Tweeter CDT 3 Cylindrical Diaphragm Transducer, 180° dispersion Woofer One 5.
Classico CL-2 Specifications Frequency Response 39 Hz – 22 kHz ±3 dB in-room Impedance 4 Ohms, nominal Sensitivity 90 dB at 2.83 volts, 1 meter Power Handling 100 watts undistorted amplifier power Minimum Suggested Power 15 watts RMS Tweeter CDT 3 Cylindrical Diaphragm Transducer, 180° dispersion Woofer One 5.
This warranty and the Extended Service Agreement will be void if: 1. The defect is a result of abuse, misuse, damage in transit, defective associated equipment, faulty installation, the use of the unit with equipment for which it was not intended, or acts of God. 2. The unit has been operated contrary to instructions contained in this Owner’s Manual. 3. The unit has been serviced by unauthorized personnel. Service If your speakers require repair: 1.
Owner’s Manual Classico CL-2 Loudspeakers Anthony Gallo Acoustics 20841 Prairie Street Chatsworth, CA 91311 USA It is very important that you fill out the Warranty Information on the back of this card and return it to us. Or, go to www.roundsound.com/product-registration.php and register. This will ensure that you are eligible for our free four-year Extended Service Agreement. Here Stamp Place www.roundsound.
Email: Dealer Telephone: Where did you first hear about the Classico CL-2? Magazine Web Zip: Other Owners Manual Esthetic Design Mounting Options Ease of Set Up Sound Quality Size Build Quality Appearance Please rate the following as: Excellent Very Good Good What is the name and address of your Gallo Acoustics dealer? ___________ Fair What other speakers did you listen to before choosing Classico CL-2s? ___________ What type of system did you purchase? Stereo Home Theatre How influentia
