Installation Manual

1. Connect one end of the Coaxial Cable (3) to the antenna (1) and then connect the other end of the

Coaxial Cable (3) from the antenna to the “TO ANT” connector on the In-Line Amplifier (4).

2. Connect the provided 3 . Coaxial Cable (5) to the In-Line Amplifier (4) connector labeled “TO TV”,

and connect the opposite end into the “Antenna Input” on your TV/converter box.

3. Connect the USB Cable (7) to the In-Line Amplifier (4). You have the option to connect the cable

into a USB port on your TV for power, or use the USB Power Adapter (6) and then plug the adapter

into a power outlet. Verify the blue LED light is on.

4. Perform a channel scan on your TV/converter box.

Helpful Tips:

When using the USB port on your TV, the in-line amplifier

will only draw power when the TV is turned on, eliminat-

ing power consumption. If you do not have a USB port on

the back of your TV, use the provided USB power adapter

with any standard AC wall outlet.

PAGE 1
Helpful Tips: When using the USB port on your TV, the in-line amplifier will only draw power when the TV is turned on, eliminating power consumption. If you do not have a USB port on the back of your TV, use the provided USB power adapter with any standard AC wall outlet. 1. Connect one end of the Coaxial Cable (3) to the antenna (1) and then connect the other end of the Coaxial Cable (3) from the antenna to the “TO ANT” connector on the In-Line Amplifier (4). 2. Connect the provided 3 ft.
PAGE 2