Voltikus PSU Audiophile grade Power supply User’s Manual 11
Contents 1. Safety Notes ................................................................................................................................ 7 2. Introduction ................................................................................................................................... 8 3. Features ....................................................................................................................................... 8 4. Quick Start .........................................
1. Safety Notes ! To reduce the risk of electrical shocks, fire, and related hazards: ● Do not remove screws, cover, or cabinet. There are no user serviceable parts inside. Refer servicing to qualified service personnel. ● Do not expose this device to rain, moisture or spillover of liquid of any kind. ● Should any form of liquid or a foreign object enter the device, do not use it. Switch off the device and then unplug it from the power source.
2. Introduction Congratulations! You are now the proud owner of the Voltikus audiophile grade ultra low noise power supply, the perfect companion to your Zodiac DAC. THE POWER THAT MAKES THE DIFFERENCE Voltikus is a sleek heavy-duty Power Supply Unit (PSU) designed to perfectly match your Zodiac DAC. Carefully tailored to deliver uncompromised power, Voltikus helps Zodiac achieve the punch and sonic richness of deep lows, a full range of mids, and tightly defined highs.
4. Quick Start It only takes a few moments to harness the benefits of the Voltikus PSU. Follow these simple steps to connect Voltikus to your Zodiac DAC: 1. Plug the supplied IEC power cable into the AC Input socket (4) on the rear panel of the unit and connect the other end to an AC power outlet. 2. Connect the DC power cable to the 18 VDC Output (6) on the rear panel and the other end to the 18 VDC input socket on your Zodiac DAC Unit. 3. Press the power switch (3) on the rear panel to power up.
6. Rear Panel Explained 2 5 3 6 4 2. Fuse compartment Takes two fuses: 0.8A, 250 VAC, 5 mm x 20 mm, Type T. 3. Power switch Toggles power on/off. 4. IEC AC Input C14 Male Connector For use with AC Power cable. 5 . Ground/Lift switch Toggles grounded or lifted state. 6. 18 VDC Output For use with supplied Antelope DC Power cable only.
7. Replacing a fuse If the power light is not illuminated and the Voltikus is plugged into a working AC power outlet with the power switch in the on position, the fuse may need to be replaced. 1. Disconnect the power cord from the electrical outlet. 2. Insert a flat blade screwdriver into the notch (8) at the bottom edge of the fuse holder (7) to release it. 3. Remove the fuses from the fuse holder. Replace them with 0.8A, 250VAC, 5 mm x 20 mm, Type T (Time Lag). 4.
8. In the box ● VOLTIKUS audiophile grade ultra low noise power supply ● Owner‘s Manual ● DC Power cable 9.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.