User Manual

Antaira Technologies - Industrial Ethernet Switches
LNX-0802C-SFP Series User Manual V1.2
19
7. Technical Specifications
Table 7.1 has the technical specifications for Antaira Technologies’ LNX-0802C-SFP series: 8-
port industrial unmanaged switches, with 6*10/100Tx, 2* Gigabit combo ports (2*10/100/1000Tx
RJ45, and 2*100/1000 SFP slots).
Standard
IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
IEEE 802.3ab 1000BaseT
IEEE 802.3z gigabit Fiber
Protocol CSMA/CD
Transfer Rate
14,880pps for Ethernet port
148,800pps for fast Ethernet port
1,488,000pps for gigabit Ethernet port
Transmission Distance Up to 100M
Transmission Speed Up to 1000Mbps
MAC Address 8K table size
RJ45 (Ethernet) Port
6*10/100Tx + 2* 10/100/1000Tx (Gigabit combo) auto
negotiation speed, full/half duplex mode, and auto
MDI/MDI-X connection
SFP Slot
2*100/1000 dual rate SFP for Fiber (Gigabit combo)
LED
Power Unit: P1 (Green), P2 (Green), Fault (Red)
Ethernet port: Link/active (Green)
SFP: Link/active (Green)
Network Cable
10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable
EIA/TIA-568 100-ohm (100m)
100BaseTX: 2-pair UTP/STP Cat. 5 cable
EIA/TIA-568 100-ohm (100m)
1000BaseTX: UTP/STP Cat.5/5E cable; EIA/TIA-
568 100-ohm (100m)
Over Current Protection Single-blown fuse
Power Input
Redundant power DC 12~48V with connective
1*6-pin removable terminal block
Fault Output 1 Relay output
Max Power Consumption 10 Watts