Specification Sheet

LMP-1204G-SFP Series

Features

12-Port Industrial Gigabit PoE+ Managed Ethernet

Switch, with 8*10/100/1000Tx (30W/Port) and 4*100/1000

SFP Slots, 48~55VDC Power Input

► Supports 8*10/100/1000Tx IEEE 802.3at/af Compliant with

30W/Port and 4*100/1000Fx SFP Fiber Slots

► Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS

(Recovery Time <50ms)

► Supports IPv4/IPv6, and DHCP Option 66/67/82

► Supports Modbus/TCP Protocol for Device Management and

Monitoring

► Configuration: Web Console, Telnet, CLI Command

► PoE Ping Alarm Function for PoE Ports Power Recycle

► IGMP v1/v2 for Multicast Traffic Filtering

► QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism

► IEEE802.1Q VLAN for Easy Network Planning

► Enhanced Network Security with IEEE802.1X, SNMP

v1/v2c/v3, HTTPS, and SSH/SSL

► Auto Warning by Exception through E-mail, Relay Output

► Operating Temp. – STD: -10°~70°C, EOT: -40~75°C

► 5-Year Warranty

Antaira Technologies’ LMP-1204G-SFP series is a 12-port industrial PoE+ managed Ethernet switch that is embedded with

8*10/100/1000Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30W/port, and 4*100/1000Fx SFP fiber ports that

support either Single or Multi-Mode modules. The LMP-1204G-SFP series is a fully manageable Layer 2 Ethernet switch that is pre-

loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open

standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The advanced

network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, RMON, Modbus TCP, and 802.1X/ HTTPS/ SSH/ SSL

increase determinism and improve network management for remote SCADA systems or control networks.

The LMP-1204G-SFP series is IP30 rated and DIN-rail mountable. There are also two wide operating temperature models for either a

standard temperature range (STD: -10°C to 70°C) or an extended temperature range (EOT: -40°C to 75°C). It also provides high EFT

and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation,

security surveillance within transportation, ITS and any other outdoor or harsh environment.

INTRODUCTION

DIMENSIONS

PAGE 1
LMP-1204G-SFP Series 12-Port Industrial Gigabit PoE+ Managed Ethernet Switch, with 8*10/100/1000Tx (30W/Port) and 4*100/1000 SFP Slots, 48~55VDC Power Input Features ► Supports 8*10/100/1000Tx IEEE 802.3at/af Compliant with 30W/Port and 4*100/1000Fx SFP Fiber Slots ► Network Redundancy: STP/RSTP/MSTP, and G.
PAGE 2
SPECIFICATIONS Protection Technology Standards IEEE 802.3 10Tx Ethernet IEEE 802.3u 100Tx Fast Ethernet IEEE 802.3ab 1000Tx Gigabit Ethernet IEEE 802.3z Gigabit Fiber IEEE 802.3x Flow Control for Full Duplex IEEE 802.3ad for Port Trunk with LACP IEEE 802.1d STP (Spanning Tree Protocol) IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s MSTP (Multiple Spanning Tree Protocol) ITU-T G.8032/Y.1344 ERPS (Ethernet Ring Protection Switch) Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.