User's Manual

Bluetooth Stereo Speaker (BONE) User Manual

Play from a Bluetooth device

Note: The effective operation range between the speaker and your Bluetooth device is

approximately 10 meters (33 feet) line of sight maximum

- Slide the Power [ON/OFF] switch to “ON” to turn on the speaker

- The blue LED indicator will flash

- Activate the Bluetooth function in your Bluetooth device

- Select “BT SPEAKER” on your Bluetooth device for pairing

- When connected, the blue LED indicator stays steadily on

- Start music play on your Bluetooth device

- Adjust volume on your Bluetooth device or press the [+] or [-] button on the speaker

- Press [Play/Pause] button on the speaker to play or pause music

- Slide the Power [ON/OFF] switch to “OFF” when the speaker is not in use for power saving

Play from an external device

- Slide the Power [ON/OFF] switch to “ON” to turn on the speaker

- Connect your speaker with an external device through a 3.5mm cable (not supplied)

- Start music play on your device

- Slide the Power [ON/OFF] switch to “OFF” when the speaker is not in use for power saving

Power Supply

The speaker operates on built-in rechargeable battery

To recharge the built-in battery, connect micro USB socket with PC through supplied USB

cable

Charging: Red LED indicator turns on

Fully Charged: The red LED turns green when it is fully charged

(Low battery: Red LED indicator flashes)

PAGE 1
Bluetooth Stereo Speaker (BONE) User Manual Play from a Bluetooth device Note: The effective operation range between the speaker and your Bluetooth device is approximately 10 meters (33 feet) line of sight maximum - Slide the Power [ON/OFF] switch to “ON” to turn on the speaker The blue LED indicator will flash Activate the Bluetooth function in your Bluetooth device Select “BT SPEAKER” on your Bluetooth device for pairing When connected, the blue LED indicator stays steadily on Start music play on your
PAGE 2
Specification Rated output power: DC Power input: Bluetooth specification: Supported Bluetooth Profiles: Range: Working temperature: 1.6W RMS x 2 USB: 5V, 500mA V3.
PAGE 3
to correct The interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules.