User's Manual

ManualsBrandsAnsen Electronics ManualsAudio EquipmentSoft Mood Light Bluetooth Speaker

Bluetooth Mono Speaker with Color Changing Light (Jazz) User Manual

Play from a Bluetooth device

Note: The effective operation range between the speaker and your Bluetooth device is

approximately 10 meters (33 feet) line of sight maximum

- Slide the Power [ON/OFF] switch to “ON” to turn on the speaker

- The blue LED indicator which is located on the bottom left of the casing will flash

- Activate the Bluetooth function on your Bluetooth device

- Select “BT SPEAKER” on your Bluetooth device for pairing

- When connected, the blue LED indicator stays steadily on

- Start music play on your Bluetooth device

- Adjust volume on your Bluetooth device or press the [+] or [-] button on the speaker

- Press [Play/Pause] button on the speaker to play or pause music

- Slide the Power [ON/OFF] switch to “OFF” when the speaker is not in use for power saving

Play from an external device

- Slide the Power [ON/OFF] switch to “ON” to turn on the speaker

- Connect your speaker with an external device through a 3.5mm cable (not supplied)

- Start music play on your device

- Slide the Power [ON/OFF] switch to “OFF” when the speaker is not in use for power saving

Color Changing RGB LED Light effect

- Slide the Power [ON/OFF] switch to turn on the Speaker

- Press [LIGHT] button repeatedly to toggle between below modes

1) Continuous color changing mode

2) Fixed color mode:

While it is in color changing mode, wait until your desired color appears and press [LIGHT]

button to freeze the color

3) Sound-to-Light mode

In fixed color mode, press [LIGHT] button once to switch to “Sound-to-light” mode and the

top red light indicator will turn on.

Start music play on your device, the color of the RGB LED light will change according to

the beat of your music

NOTE:

- If the sound volume is too low, the RGB LED light may not turn on and this is normal.

Turn the volume up and the RGB LED will light up.

- If the speaker is not playing any music or sound, the RGB LED will turn off

4) Off mode

Summary of content (3 pages)

PAGE 1
Bluetooth Mono Speaker with Color Changing Light (Jazz) User Manual Play from a Bluetooth device Note: The effective operation range between the speaker and your Bluetooth device is approximately 10 meters (33 feet) line of sight maximum - Slide the Power [ON/OFF] switch to “ON” to turn on the speaker The blue LED indicator which is located on the bottom left of the casing will flash Activate the Bluetooth function on your Bluetooth device Select “BT SPEAKER” on your Bluetooth device for pairing When con
PAGE 2
Power Supply The speaker operates on built-in rechargeable battery To recharge the built-in battery, connect micro USB socket with PC through supplied USB cable Charging: Red LED indicator turns on Fully Charged: Red LED turns green when it is fully charged Low battery level: RED LED indicator flashes NOTE: Red/Green LED indicator is located on the bottom left of the speaker Specification Rated output power: DC Power input: Bluetooth specification: Supported Bluetooth Profiles: Range: Working temperature:
PAGE 3
) Dispose of used batteries according to the instructions 4) Do not expose the device to an extremely high electromagnetic filed, this may impair the correct functioning of the device. 5) The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in order location.