User Manual IntelliMove What’s in the Box? 1. SmartGlove Device 2.
3. Ansell Gloves (1 pair) Device operation x The pod is always on and collecting data except for the scenario wherein it is plugged into the docking station. x To start using the pod, take it out of the docking station and slide it into the back pocket of your glove or strap as shown in the image below x The LED on the pod must be blue indicating that the device is operating correctly. If the LED is red, it is indicative of low battery or an issue with the device health.
x The devices will come preprogrammed with the Wi-Fi credentials as provided by the customer. The credentials can be updated over the air if requested by the customer. The only requirement for updating the Wi-Fi credentials is that the device must be connected to a previous network to receive the updates over the air. x To pair the device to your Bluetooth network, go the mobile app as shown in the figure below and. Go to ‘More’> ‘BLE Devices’ and scan for the Bluetooth device.
Please note that the only condition for the data upload to the cloud is that the device to which the glove is paired to via Bluetooth (phone, tablet) must have an active internet connection .
To check the user data, go to the Ansell mobile app or the web dashboard. Enter the login credentials provided. You can navigate the different widgets to check the data for different activities, in different forms and over different data and time ranges.
Operational Constraints: x x The device can only be connected to Wi-Fi when plugged in for charging and not while it is being worn. Only Bluetooth radio can be active while the device is being worn. Simultaneous operation of Bluetooth and Wi-Fi is not possible by design.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Déclaration de conformité canadienne L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
