Wireless NVR Kit Manual Product Manual Wireless NVR Kit Introduction 1.Product features overview............................................................................................................................................... 2 1.1Product introduction............................................................................................................................................. 2 1.2 Product parameters...............................................................................
Wireless NVR Kit Manual 4.1.2 Login........................................................................................................................................................12 4.1.3 Logout......................................................................................................................................................13 4.1.4 Restart................................................................................................................................................
Wireless NVR Kit Manual 4.10.4Hard disk setup....................................................................................................................................... 39 4.10.5Exception settings.................................................................................................................................41 4.11Device maintenance and management.............................................................................................................. 41 4.11.
Wireless NVR Kit Manual Introduction Thank you for purchasing our products. If you have any questions or requests, please feel free to contact us. Statement We have tried to ensure the integrity and accuracy of the contents of the manual, but it can not help but appear technically inaccurate, or product features and operation does not match or print errors, etc. If any doubt or controversy, please refer to the company finally explanation.
Wireless NVR Kit Manual 1.Product features overview 1.1Product introduction The K9604-W NVR is one of a Juan new generation of NVR (Network Video Recoder) products, which supports wireless WIFI network video access, supports maximum 1080P wireless real-time video preview, video encoding and playback operation. Using a number of high-tech, such as video and audio code technology, embedded system technology, storage technology, network technology, wireless network technology.
Wireless NVR Kit Manual Shutter 1/25s to 1/25,000s Lens 4/6mm OSD Date Time & Title White Balance Auto Day&Night IR cut filter with auto switch 3D-DNR Auto Mirror/Flip On / Off smart stream Dual-stream: Dual-stream: 1280x720@15fps 1280x960@15fps 1920x1080@15fps 640x360@15fps 640x360@15fps 640x480@15fps Signal /noise rate > 39.1 Db Interface RJ45 / WIFI 802.
Wireless NVR Kit Manual • Match with the IPC to support video motion detection; • Collaborate with IPC to support video masking; • Support user rights management; 2.Operation explanation 2.
Wireless NVR Kit Manual 2.2Rear Panel Interface explanation Figure 2 2.
Wireless NVR Kit Manual Name Key instructions Function instructions Number 0~9 Input number 0~9 Character -/._*#@ Enter the punctuation Capital / lower case caps Letter case switch Backspace ← Remove the character before cursor 2.5The mouse operation instructions Figure 4 POWER Power button DEV Device key:Press the DEV key, then press the number keys to enter the same device number with the host and press the "ENTER" key to save the settings. The control of the device take effect.
Wireless NVR Kit Manual ▲ In the menu mode, select up; in PTZ mode, control the dome camera to rotate up ▼ In the menu mode, select down; in PTZ mode, control the dome camera to rotate downward In the menu mode, select the left; in PTZ mode, control the dome ca,era to rotate to the left In the menu mode, select the right; in PTZ mode, control the dome camera to rotate to the right ENTER OK key.
Wireless NVR Kit Manual 2.6.2Commonly used buttons instructions Name Icon OK Explanation Save the operation and take effect, close the operation interface. Cancel Cancel the operation just made Apply Save the operation and take effect, do not close the user interface. Copy to Copy the settings of this channel to other or all channels. 2.
Wireless NVR Kit Manual the IPC (wireless camera) and NVR should avoid the obstacle as much as possible. When the 4-channel video are connected at the same time and there is no obstacle between the NVR and the IPC, the IPC is placed in a spherical coverage area with a radius of 60 m with NVR as a center of gravity. The radius is reduced to 30 meters when there are one wall between the NVR and the ipc.
Wireless NVR Kit Manual the NVR. using a phillips screwdriver,screw the provided screws into the holes .assemble the cover Figure 5.1 Figure5.2 Figure 5.3 Figure 5.
Wireless NVR Kit Manual 3.3The camera placed in the default location 1,In the effective coverage of the wireless signal, install wireless camera to the default location, and provide 12V power supply; 2,Power the wireless camera for 1 minute or so, you can see the video in the NVR monitor; 3,If do not show the image, indicating that the distance is too far so need to shorten the distance. Figure 6 Figure 7 NVR antenna transmit signal to the surrounding divergence.
Wireless NVR Kit Manual When power supply is abnormal, it will cause the hard disk video recorder can not work, or even damage the NVR, it is recommended to use the stable power supply for power supply. Explanation Before starting up, make sure that the display or monitor is connected to the video output of the device. Specific starting up steps are as follows: 1,Plug in the power, the front panel power indicator is red. 2,Turn on the rear panel power switch or tap the front panel power "On" key.
Wireless NVR Kit Manual Password can be composed of numbers, characters, operators and points, *, #, the length can not exceed 10 characters. 4.1.3 Logout If the users need to log out the process, you can right-click shortcut menu, select to exit system. Click the user to log off, then you can complete. As shown below. If the user needs to log off automatically, in the system settings -> General settings, you can set open the automatic logout state.
Wireless NVR Kit Manual Steps: 1, One: set the wizard. You can set whether to turn on the boot wizard. Set the interface as shown below, after the operation is complete, left click on the next button. 2, Two: general setup. Can set the system city, time, language, key type, the status of the remote control, remote control code. The interface is shown below. After the operation is complete, click the Next button. 3, Three:Network settings.
Wireless NVR Kit Manual 4, Four : hard disk setup. Can display the current list of hard disk, including the model, capacity, usage, status, formatting status. If you want to format the hard disk, you can select the corresponding hard disk, then click the format button. Wait a moment, you can format the selected hard disk, the hard disk format status will also be displayed as "formatted." Operation interface as shown below.
Wireless NVR Kit Manual 4.3.2 Add device Function instructions:Used to add the searched IPC device. Operation steps: 1. Code matching instructions: The code matching is mainly for matching NVR with IPC and sending NVR WiFi account name and password to the IPC, so that IPC automatically connected with NVR.
Wireless NVR Kit Manual Fast adding method: the main menu (right click the mouse) -> video management -> Fast adding Through the network cable to connect NVR and IPC, click search, video management interface will show the information that the NVR normally communicated with IPC. Click on fast adding, the system will automatically add the IPC which can work properly in idle channel, the monitor will display the IPC video signal. When working, can not unplug the cable.
Wireless NVR Kit Manual After entering the video management interface, click to select any of the IPC device information which has been added; 2, Click the "Delete Channel" button to delete the selected single IPC device, and the system automatically disconnects the device's monitoring screen. As shown below: Explanation Click "delete all" button to achieve fast deleting all the added IPC device. 4.3.
Wireless NVR Kit Manual 3, As picture shown below, it means IPC1 is connected to NVR through IPC2 and IPC3. IPC2 is connected to NVR through IPC3. IPC3 is connected to NVR directly. 4, Click “Apply” and then click “refresh” to check if the setup is successful.
Wireless NVR Kit Manual 4.3.6.Edit Channel Functional explanation:Edit IPC device channel protocol, IP address, port, user name and password, stream type. Operational steps: 1, Right click on the main interface of the system, in the pop-up menu right-click "Video Management", in the open video management interface, click to select any of the IPC device which has been added; 2, Click the Edit Channel button to set the corresponding information in the Edit Channel Connection Parameters interface.
Wireless NVR Kit Manual Explanation Stream selection has the main stream, sub-stream optional. In the case of better network conditions, device self-adaptation can choose the main stream, to get more high-quality screen. In the case of poor network conditions, the device self-adaptation will select the secondary stream, to ensure the fluency of the monitor. Resolution has 720 * 576,960 * 576,1280 * 720 and other grades can choose, the higher the resolution, the better quality. 4.3.
Wireless NVR Kit Manual 2、Click Refresh, you can search the camera in current channel and you can check the channel name of the device, resolution, stream value, video frame rate, software version details. 4.3.10 Channel OSD Functional explanation : You can adjust the color of the IPC device in each channel and change the currently displayed channel name. Enable the status display and the communication quality, the icon of the communication situation is displayed in the multi-screen of the main interface.
Wireless NVR Kit Manual 3, Select the display setup, enter the location of communication icon adjustment. Can select position and magnification. 4.3.11 Camera Functional explanation:You can set the panorama camera installation mode Steps: 1, Right Click the main interface, in the shortcut menu, select the system setup, select the channel setup -> camera.
Wireless NVR Kit Manual 2, Set the network parameters. In the network setup of the "network setup" can modify the device's IP address, subnet mask, gateway and other information. You can check the automatic access to IP. Check the E-see net (P2P) and displaying the E-see net ID is for remote monitoring. 3, After setup, click the "Apply" button to save the setup, or click the "OK" button to save the setup and exit the settings interface.
Wireless NVR Kit Manual Network status Notify the current network status If the ID number is not online, it can be operated according to the notifying information. 4.4.2.Dynamic domain name Function explanation : If the device does not have a fixed access address, using DDNS (dynamic domain name resolution) to access the device through the domain name, you can effectively solve the trouble brought by dynamic IP to access the equipment.
Wireless NVR Kit Manual 2, Check the FTP function to open the check box. 3, Fill in the FTP host, port, user name and password and other information. 4, Set the time period, click the "test" button. After the test is successful made, click the "Apply" button to save the setups. 4.4.4.E-Mail Function explanation:For the alarm and video test results to inform the user by mail.
Wireless NVR Kit Manual SMTP server The input format is smtp. Mailbox server name .com, for example smtp.126.com User name Mailbox full user name,For example123456@126.com Password Email Password Encryption type The default can choose to not select, if the test fails, then modify to SSL Sender Recipient The sender's full email address, need to be consistent with the user name, for example123456@126.
Wireless NVR Kit Manual PPPoE function means that PPPoE dial-up Internet access is enabled , means do not enable that function. 4.4.6.3G Steps: 1, Right click the main interface, in the shortcut menu, select the network setup -> 3G. As shown below: 2, Check the 3G module to open the check box. 3, Fill in the dialing number, APN, PIN, user name and password and other information. 4, Click the "Apply" button to save the setup。 4.4.7.
Wireless NVR Kit Manual Click Reset to restore the information of the wireless module to the factory setup. 4.5 PTZ setup 4.5.1 PTZ parameter setup Operation prerequisites: Before the user controls the IP channel or the PTZ, please make sure that the network between the PTZ decoder and the NVR is connected normally in advance and that the device PTZ decoder parameters are configured.
Wireless NVR Kit Manual Copy to In the right selecting box of the copy to button, select the target channel, click the "copy set to" button, the system will apply the current channel setup information to other target video channel. 4.5.
Wireless NVR Kit Manual 8, Right click to return to the setup interface and click the Apply button to save the setups. Explanation Preset position is the cruise point of the cruise route, cruise path move from small to large according to cruise point. Hold time is the time the dome camera stays at this preset point. Cruising speed is the rotating speed of the dome camera from one to another point. 4.6 Recording 4.6.
Wireless NVR Kit Manual 1, Right click on the main interface, select and click System Setup in the shortcut menu. 2, Click the recording setup, click the recording plan. As shown below: 3, Use the drop-down box to select the channel and week which need to set the timed recording. 4, Set the time period for the scheduled recording, check the timing checking box.
Wireless NVR Kit Manual If you need to set motion detection for other channels, repeat the above steps. The default sensitivity for video detection is "higher". 4.6.4 Alarm recording Function explanation:Turn on the alarm recording function, the system will record when detecting the alarm input. Steps: 1, Right click on the main interface and select System Setup in the shortcut menu. 2, In the "System Setup" interface, select the alarm setup for the recording schedule.
Wireless NVR Kit Manual Steps: 1, Right-click on the main interface and select Video Playback in the shortcut menu. 3, In the sub-menu, the user can click to select 5 minutes, 10 minutes, 30 minutes playback time and select any playback channel based on needs As shown below: Explanation Before making video playback, make sure that the device is properly connected to the hard disk and turned on the recording function. 4.7.
Wireless NVR Kit Manual Figure: video playback instructions Button Description Button Pause Description Button Description Start Button Speed Descriptio nLast frame Butto n Description Next frame Explanation The playback progress can be controlled by the below playback time bar. Support 2 times / 4 times / 8 times / 16 times the speed of playback. 4.8 Video backup Function explanation:Recording files can be backed up to USB flash disk for storage.
Wireless NVR Kit Manual Explanation After the search is complete, the user can see the start time, end time, duration and storage size of the video data. To ensure successful video backup, make sure the USB flash disk has enough storage space. 4.9 Alarm 4.9.1Motion detection alarm Function description:When an object is detected in the selected screen, the device will trigger an alarm and output an alarm.
Wireless NVR Kit Manual Sensitivity selection has five grades: highest, higher, moderate, lower, lowest. The higher the sensitivity, the moving objects are more likely to be detected. Mobile detection processing methods are alarm, buzzer, E-Mail notification, mobile phone APP alarm. If choosing the alarm for the motion detection processing mode , you need to select the work mode as "normally open" in the video setup -> alarm setup.
Wireless NVR Kit Manual Steps: 1, Right click the main interface, select "System Setup" in the shortcut menu, enter the "System Setup" interface. 2, Select General Setup -> General Setup. As shown below: The operation is explained in the table below: Operational target Explanation Automatic logout Select whether the system is automatically logged off without operation. Button sound Select whether to turn on the button sound of the control panel.
Wireless NVR Kit Manual 4.10.3 Screen setup Function explanation:Set the screen parameters. Steps:Right click the main interface, select the system setup -> General Setup -> screen setup. The operation is explained in the table below: Operational target Explanation Monitor adjustment Set the hue, brightness, saturation, and contrast of the graphics OSD transparency You can modify the transparency of the interface. VGA Resolution Select the resolution which adapt to the screen.
Wireless NVR Kit Manual 3, You can see all the information the device connected to the hard disk, including model, capacity, status, formatting status. 4, Select to check for automatic coverage as needed. 5, To format the hard disk, left-click to select the hard disk and click the Format button. 6, To delete the old file automatically, select "User-defined" in the drop-down box and fill in the number of days. 7, Click the "Apply" button to save the setups.
Wireless NVR Kit Manual 3, Select the exception type, click "Open", select the alarm mode. 4, Click "Apply" to save the setup. 4.11 Equipment maintenance and management 4.11.1 System message Version Information Function explanation:The user can check the device name, device model, device serial number, hardware version, software version, build time and other information.
Wireless NVR Kit Manual Version information for our late maintenance has a very important significance, the user needs to provide the appropriate version information when need maintenance. Hard disk information Function explanation:The user can check all the hard disk models the device has accessed, capacity, usage, status, total capacity, total consumption and total margin and other information.
Wireless NVR Kit Manual Explanation Click on the next page to read the log. Log stored in the hard disk, the log information will be lost after the hard disk formatted. The time type is available: system start-up, system shutdown, system configuration revision, video, alarm, device warning and all. 4.11.2 User Management Explanation The default administrator name is admin and the password is empty. Administrators can add, remove, and edit user rights.
Wireless NVR Kit Manual Permission explanation: Video playback:You can retrieve and playback the recording data stored in the hard disk. Video backup:You can back up the video data that stored in the hard disk by usb flash disk. PTZ control:Control the direction of the movement, PTZ cruise. Output volume:Controls the audio output volume size. Manual recording:You can manually open the video at any time. System setup:Contains general setup, video setup, network setup, channel setup and system management.
Wireless NVR Kit Manual 3, Re-edit the user's permissions. 4, Click the "OK" button to save the settings. Explanation Super users can not be edited. Change Password Steps: 1, Right click the main interface, in the shortcut menu, select the system setup, and then select the system management -> user management. 2, Left click and select the user name and click the "Change Password" button. Access to the modified password interface. As shown below: 3, Fill in the old password and set a new password.
Wireless NVR Kit Manual management -> factory setup. As shown below: 2, Check the option that need to restore factory setups and click the "Apply" button 3, Select the "OK" button in the prompt interface. 4.11.4 System maintenance Steps: 1, Right click the main interface, in the shortcut menu, select the system setups, and then select the system management -> system maintenance, as shown below: 2, Automatic maintenance select turning on. 3, Select the specific time, check the time period. 4, Click OK. 4.
Wireless NVR Kit Manual 2, Put the prepared firmware to the USB flash disk root directory and insert the USB flash disk into the USB port. 3, Click the USB storage device - System - Start. 4, In the progress bar you can see the progress of the system upgrade, waiting for the system upgrade is complete, the device will restart. Method 2: 1, Right click the main interface,using fast network to see if the network status is normal, if not normal, pls do the network configuration as described above.
Wireless NVR Kit Manual 2, Put the prepared IPC firmware into the USB flash disk, insert in to the USB Port behind the recorder. Check the selection. Click to start. 3, In the progress bar you can see the progress of the system upgrading, waiting for the upgrade is complete, the camera will restart. Explanation IPC upgrade only for specific protocol IPC, if you can not search for upgrades, it means this camera does not support this feature. 5WEB Access 5.
Wireless NVR Kit Manual Go to the "login" interface, shown below: 3, Enter the user name and password correctly. 4, Click "Login" to enter the preview interface. As shown below: 5, The first time you follow the prompts to download and run the WebClient.exe control. As shown below: 6, Log in again to preview the interface normally.
Wireless NVR Kit Manual Explanation Ip address can be checked in the system setup -> network setup. Support multiple users log in at different PC terminals. If the web page port number is modified (default is 80), when input IP address in the browser, you need to enter the port number after the address, such as 192.168.1.28:102.
Wireless NVR Kit Manual 2, Enter the playback interface, as shown below: 3, Set the search time and type, channel, click the "Search" button. 4, Select the playback channel to play back the recording data normally. Explanation When a non-super user logs in, pls make sure that the user has remote playback permission. You can check and give users a remote video playback permission in the System Setup -> System Administration -> User Management -> Edit User. 5.2.
Wireless NVR Kit Manual 5.3 E-see net access 5.3.1 E-see net ID login Steps: 1, Open the browser. 2, Input http://www.dvr163.com。As shown below: 3, Enter the device ID, user name, and password correctly. 4, Click the Login button to enter the preview interface. As shown below: Explanation Device ID can be set by the system setup -> network setup, check e-see net(P2P) check box to obtain. E-see net ID must be online to enable remote login.
Wireless NVR Kit Manual 5.3.2 Username login Function explanation:User name login can resolve limitations that using e-see net user name can only manage single device. Steps: 1, Open the browser. 2, Enter http://www.dvr163.com. Select "User name login", as shown below: 3, The first time, you can register according to the prompt information, after registration and then log in. Explanation Support Chinese and English language selection. 6.Mobile access Steps: 1, Software download.
Wireless NVR Kit Manual Notice: ● ● ● When the installation is complete at the first time, the login page will pop up. If there is no login account, you can register an account. After the account login, every time you open the software, it will direct into the device interface.
Wireless NVR Kit Manual Explanation ● ● ● Click “+”, Add device can choose cloud ID, ip / DDNS, LAN scan After the account login, system automatically identify the number of ID, click submission after adding then complete. Local mode, you need to choose the correct channel number, the default is 4. 4, Preview. Click on the added device to go to the preview. The default is 4 channels, you can choose a channel to preview.
Wireless NVR Kit Manual ● ● support 4/6/8/9/13/16 screen split to preview at the same time If the PTZ control is supported, can use the PTZ control button to operate. 5, Remote playback. In the preview interface, click remote playback to enter into the playback interface, as shown below: Explanation ● ● ● ● ● Remote playback can pull the vertical bar to select a specific period of time, click the channel to select a specific channel. Support 1 channel playback.
Wireless NVR Kit Manual Explanation Click the screenshot to intercept the current screen Click and select video to save the video in your phone Click on the picture quality, can choose HD or SD, HD is the main stream, SD is sub-stream. 7, Mobile phone APP alarm. Click "me", enter the operation interface, select "alarm setup", open the alarm message. You can see the alarm information after the app set alarm push and enter into alarm information section.
Wireless NVR Kit Manual Before adding a device, you need to set the alarm function in the app. A detailed reference, pls refer to 4.9.1 motion detection alarm, otherwise you can not receive alarm information even open the alarm. 7.Appendix 7.