Wireless Security NVR Kits Quick Installation Guide 2pcs/4pcs/6pcs/8pcs 720P/960P/1080P Wireless Security NVR Kits
Content 1. Thanks--------------------------------------------------------------------------------------------------2 2. Safety tips----------------------------------------------------------------------------------------------2 3. What else do you need-----------------------------------------------------------------------------2 4. Know the hardware----------------------------------------------------------------------------------3 5.
1. Thanks Thank you for purchasing Anran products! This is a quick user’s guide explaining how to set the system up and get it running. If you need customer support, please email us at support@anran-cctv.com. You can expect a response within 24 hours 2. Safety Tips (Please Follow) 1. Do not put any item containing fluid on the product. 2. Use the product in ventilated area and avoid blocking the vents. 3. Use the included power supply with the product to prevent damage. 4.
①Wi-Fi Antennas: Wi-Fi connection with cameras. ②VGA Port: For viewing on VGA monitor ③HDMI Port: For viewing on HDTV ④ WAN/ LAN Port: Connect your NVR to the Internet, or data transmission with cameras. ⑤USB Ports: For mouse and data backup ⑥Power supply 5. Things to check before installation ①Package includes After the item is received, please check all products and accessories according to vendor's Package Includes description. If anything is missed or damaged, please contact us.
Please connect the wireless camera system as pictured below. 1. Screw on antennas to cameras. 2. Connect the monitor/ TV to the NVR via its HDMI or VGA port 3. Connect the NVR and cameras to power (bigger 12V 2.5A or 12V 3A power adapter for NVR, smaller 12V 1A or 12V 2A for cameras). 4. See FAQ #Q2 if you don't get any display on the screen; skip to 5 if you get display. 5. About 1-2 minutes, you should see cameras' images on the screen. 6. Connect the NVR's WAN port to your router with a network cable.
Tips: To protect your privacy, please set your password at your earliest convenience. Right click→go to System Setup→System Admin→User to set password. Password should be no more than 10 letters or numbers. To learn more information about the network status, right click, go to System setup → Network setup, you will see Cloud ID is ONLINE and Network status is Healthy Network. If not, please make sure the boxes next to DHCP and Enable (next to Net Diagnose Info) are checked.
Step4. Cloud ID: you can find it in the NVR's Network Setting User Name: default user name is "admin" Password: Default password is nothing. Leave blank. Tips: If you have already set the password for your NVR, please enter it. Remember it is the NVR system's password, not APP's password. Step5. On your device list, click it to view the cameras.
② Playback on mobiles In the ARCCTV App, while viewing live video through the system, click Playback. You will enter the remote playback menu. The App will automatically playback camera1. You can switch channels by choosing the CH.
. Viewing Camera on Computer or Laptop by IE. You can view camera on computer or Laptop by IE in locate or remotely. Step1. Open IE browser on your computer or Laptop, go to "www.dvr163.com". (If you don't have IE browser, please download it first) Step2. Choose English first, Click User name login→ Input your username and password →click login. If this was the first time that you use it, please click “New account” to apply an account.
Step3. Input the following information and click “Add’’ to add the camera systems. Cloud ID: Please input your Cloud ID (find it in the NVR's Network Setting, or right bottom corner of the screen). Device set name: Name it yourself. Device user name: This is NVR system’s default user name, if you hadn't changed it, it should be admin. Device password: This is NVR system’s default password, if you hadn't changed it, it should be blank.
Step5. When you have finished installing the plug-in, please click Camera list, then you can view your video now. 10. Record Video ① System with preinstalled hard drive Kits with preinstalled hard drive will automatically start to record videos when the system is powered on and running. The only thing to check is if hard drive is "Formatted". You can check it in System Setup→General Setup→HDD setup. If it's unformatted, select the hard drive and format it.
②System without preinstalled hard drive Please refer to FAQ#Q1 to install the SATA hard drive and format it. After it's done, the system will record automatically. ③Record Modes Default recording mode is Time Record: 24x7 continuous recording. When the HDD is full, the system will cycle recording and overwrite from earliest content. A 1TB HDD records 4 720P/960P cameras for around 15 days, 8 720P/960P cameras for around 7.5 days. A 1TB HDD records 4 1080P cameras for around 8 days. 1.
2. Record Plan, please go to System Setup→Record Setup→Record Plan, The system default is 24-hour Regular Record and Motion Record. You can set it manually by yourself. 3. Time Record, set time periods you want the NVR to record. System Setup→Record Setup→Record Plan. The default "Everyday 00:00-23:59" means 24x7 recording.
4. Motion Record. Motion Record means to record only when movement is detected. Click right→System Setup→Record Setup→Record Plan. By unselecting “Time” and selecting “Motion”, the channel will record only when motion detected. (Please refer to FAQ #Q7) Tips: "Copy to" button. When you change the settings, it applies to channel 1 only by default. If you want to apply the change to all channels, please click "Copy to" to copy the setting to all channels.
11. Playback video In the NVR system, Choose Video playback. You will then enter the Video Playback system. You can specify channels and time and search out videos. You can select the video file you want to play back, and then double-click it to play it back. 12. Backup videos to USB storage When you have recorded video in your hard disk, you can backup the video with USB flash disk.
want to backup→Click Backup. Click “Yes” to backup record. Click OK when backup record succeeds. Tips: If the NVR just has one USB port, you should use an extension cable so you can plug in the mouse and your USB flash disk. 13. Device Manage ① Add new camera--Match Code Before match code, please delete the corresponding channel to spare a channel for a new camera, then you can match and add new camera onto the channel.
Match code the camera, you need to put the camera next to the NVR 1. Please put the camera next to the NVR, and connect the camera to the power supply 2. Right click --go to "Wifi add", as pictured below 3. It will automatically search and add cameras 4. A few seconds later the picture will be displayed on the screen 5. Click "Exit" after all cameras are connected NOTE: If you have been match code for this camera before, but now it is disconnected (“IPC Disconnected”) 1.
supply 2. Please go to "Video Manage" and delete the "IP disconnected" camera as shown below. 3. Press the camera's reset button for 13-15 seconds (the button next to the camera's power cord) and wait about 2 minutes. The camera automatically restarts. 4. Right click mouse--go to "Wifi add", as pictured below.
5. It will automatically search and add cameras 6. A few seconds later the picture will be displayed on the screen 7. Click "Exit" after all cameras are connected Then, you can unplug and move the camera to anywhere you want. When it gets power, it will automatically reconnect. (Camera needs to be in the WiFi range, please refer to FAQ #Q5) ② Delete channel Delete channel is only used when you need a channel for a new camera. In Video Manage, select a channel from below box, click delete.
④ Change camera sequence After the cameras are mounted, users may want to change the sequence of cameras to get a better overview of the system. Simply use the UP and DOWN arrow buttons in the Device Manage so you can change the sequence 14. Email notification The Cloud ID should be ONLINE and the Network Status must say "Healthy Network" first. Please prepare a Gmail address and set up the email notification as following steps. Step1. Login to your Google account on your PC, click “Signing in to Google.
Step2. Go to NVR system, right click: System setup→Channel Setup→Video detection. Check Enable for Motion Detection→Open Alarm-mail Notice and App Alarm→Click Ok. Arming time---click this button, which you can set the alarm time. Area edit--- click this button, which you can modify the motion detection area. (Default motion detection area is the entire area a camera can see) Step3. Setup email account Click right→System Setting→Network Setting→Email. Enable E-mail function and fill in email settings.
SMTP Server Port User Name Password Encryption Type Sender Sendee1 You email smtp server. For example: smtp.gmail.com 25 Sender e-mail address(Gmail e-mail address) to send alarm Sender E-mail login password TLS Sender e-mail address to send alarm Receiver e-mail address to receive alarm 15. FAQs Q 1: How to install a hard drive inside NVR? A: Before installing the hard drive disk, please cut the power if it was on. Step1. The hard drive installation instructions please refer to the followings pictures a.
c. The installation instructions of NVR with 12 inch LCD monitor Step2. Right click the mouse, System setup→General setup→HDD setup, then click Format and format HDD. Tips: You also can check if your system had already preinstalled the hard drive as above method. Q2: What do I do if I can’t get anything to display on my TV from the NVR system? A: Please use your TV remote control to switch signal source.
The default output resolution of the NVR is 1280 x 1024, which may not be compatible with some screens. Here is how to solve it： Step1. Connect the NVR to any other screen via VGA or HDMI to see if you can enter the menu. Step2. Go to System Setting → General Setting → Screen Setting → VGA resolution; Change it to 1080p@60; apply to save it. Tips: Never try 1080p@50 especially in US Step3. Connect it back your primary screen. You should see it displayed on the screen now.
Q6. How do I set the Motion Detection for the Wireless Camera System？ Motion Record: Motion Record means to record only when movement is detected. 1. Click right button→System Setup→Record Setup→Record Plan. By unselecting “Time” and selecting “Motion”, the channel will record only when motion detected.
2. Go to the NVR system, right click: System setup→Channel Setup→Video detection. Check Enable for Motion Detection Channel: which camera you want to set Motion Record Detection: choose "Motion" and need ticked "Enable" Sensitivity: Sensitivity adjustment Alarm duration: The length of the alarm recording Arming time---click this button, which you can set the alarm time. Area edit--- click this button, which you can modify the motion detection area.
16. Limited Warranty Terms & Conditions 1. The standard warranty time of ANRAN is 12 months from the date of purchasing for products with the condition 'New'. Warranty on new products is one years from purchase date, unless some item that have a special stated. 2. All ANRAN warranties are limited to the original purchaser only, and unavailable for transferring to any other party. 3. Do not require Warranty registration, but purchasers are asked to reserve their receipt as proof of purchase. 4.
About ANRAN ANRAN is a top brand in today’s security monitoring market. Established in 2007, with over 25000 square feet factory location in Shenzhen,China.Committed to providing easy and user-friendly video security and smart security solutions to all customers. ANRAN has been well received in a wide range of countries and areas, like the United States, the United Kingdom, Australia, European Union and much more.
