Instructions for Use

ManualsBrandsAnpviz ManualsElectronics32 Channel 4K Network Video Recorder - Supports 32X 4K (12-Megapixels) IP POE Camera Input, 16-Channel Power Over Ethernet Supports 4 up to 32TB HDD (Not Included) Business Level

Quick Start Guide (QSG): DS-7716NI-I4/16P  DS-7732NI-I4/24P

Digital Technology Co., Ltd., or its subsidiaries (hereinafter referred to as “Hikvision”).

Graphics in this document are used for illustrative purposes only and may differ from your actual product. Specifications are subject to change without notice.

This quick start guide (hereinafter referred to as “QSG”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written

permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees, or representations, express or implied, regarding the QSG.

About this QSG: The QSG includes instructions for using and managing the product. Pictures, charts, images, and all other information hereinafter are for description and explanation

only. The information contained in the QSG is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version on the company Website

(http://overseas.hikvision.com/en/). Please use this QSG under the guidance of professionals.

Trademarks Acknowledgement: and other Hikvision trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos

mentioned below are the properties of their respective owners.

Legal Disclaimer: TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE, AND FIRMWARE, IS

PROVIDED “AS IS,” WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS

DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,

AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE

OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY

RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE, OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO

ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED FOR ILLEGITIMATE

PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

FCC Compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Conditions: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

EU Conformity Statement

This product and, if applicable, the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under

the EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:

www.recyclethis.info.

Industry Canada ICES-003 Compliance: This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Safety Instruction: These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. The precaution measure is divided into

“Warnings” and “Cautions.”

• Warnings: Serious injury or death may occur if any of the warnings are neglected.

• Cautions: Injury or equipment damage may occur if any of the cautions are neglected.

Warnings Follow these safeguards to prevent serious injury or death.

Cautions Follow these precautions to prevent potential injury or material

damage.

Warnings

• Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

• In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Refer to technical specifications for detailed information.

• Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.

• Please make sure that the plug is firmly connected to the power socket. When the product is mounted on wall or ceiling, the device shall be firmly fixed.

• If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.

Cautions

• Make sure the power supply voltage is correct before using the device.

• Do not drop the device or subject it to physical shock.

• Do not place the device in extremely hot, cold (the operating temperature shall be -10° to +55° C (+14° to +131° F), dusty, or damp locations, and do not expose it to high

electromagnetic radiation.

• To avoid heat accumulation, good ventilation is required for the operating environment.

• Keep the device away from liquid while in use.

• While in delivery, the device shall be packed in its original packing or packing of the same durability.

• Regular part replacement: some equipment parts shall be replaced regularly according to their average endurance time. The average time varies because of differences

between operating environments and usage history, so regular checking is recommended for all users. Contact your dealer for more details.

• If the product does not work properly, contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or maintenance.)

 

Summary of content (16 pages)

PAGE 1
Quick Start Guide (QSG): DS-7716NI-I4/16P  DS-7732NI-I4/24P © 2017-2019 Hikvision USA Inc. • All Rights Reserved • Any and all information, including, among others, wordings, pictures, and graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd., or its subsidiaries (hereinafter referred to as “Hikvision”). Graphics in this document are used for illustrative purposes only and may differ from your actual product. Specifications are subject to change without notice.
PAGE 2
WHAT’S IN THE BOX Make sure the following items are in your box NVR HDD Screws Mouse HDD Installed Remote HDD Cables MENU TREE Use this menu tree to navigate the embedded menus.
PAGE 3
 FRONT PANEL (continued) No. 1 Item On/Off Power 2 Status Indicators 3 Enter 4 5 6 7 8 9 10 Direction Buttons Back Menu USB Ports Description Turns green when device is on Ready Flickers red when data is being read from or written to HDD HDD Blinks red when data is being read from/written to HDD Tx/Rx Blinks blue when network connection is functioning properly Confirms menu selection. Ticks checkbox fields. In Playback mode, plays or pauses video.
PAGE 4
1 2 3 CONNECT DEVICES 1. Connect AC power cord to the NVR. 2. Connect NVR to LAN using Cat 5e cable. 3. Connect video monitor(s) to NVR using HDMI and/or VGA cables, as appropriate. 4. Connect mouse to USB port (wireless mouse can be used in lieu of included mouse). START THE NVR 1. Plug AC power cord into grounded wall outlet (line conditioning UPS is recommended). 2. Turn power switch on. Power indicator LED will turn GREEN.
PAGE 5
3 LOCAL ACTIVATION (continued)  Log In (Dialog Box) 1. User Name field will be prefilled with “admin.” 2. Input Password (account locks for 30 minutes after 7 incorrect attempts). 3. Click OK. 4 INITIALIZE THE HARD DRIVE (IF NEEDED) The system is set up to record upon power up and will beep and display “Do you want to initialize drive” prompt if the hard drives are not initialized. 1. Go to MENU > SYSTEM CONFIGURATION > HDD. 2. Use the checkboxes to select the HDDs that need to be initialized. 3.
PAGE 6
5 SET DATE AND TIME 1. Go to MENU > SYSTEM CONFIGURATION > GENERAL.  DATE/TIME Date and time settings  TIME ZONE Time zone and daylight savings time settings  ENABLE NTP Network Time Protocol settings    6 SET UP NETWORK ACCESS 1. Go to MENU > SYSTEM CONFIGURATION > NETWORK. 2. Enable DHCP (check the checkbox). 3. Press Refresh button to update the IPv4 address, subnet mask, and IPv4 default gateway. 4. Disable DHCP (uncheck the checkbox). 5.
PAGE 7
SET CAMERA PORTS After assigning the IP information, click the More Settings tab. The More Settings tab contains the ports that need to be forwarded for remote access. • SERVER PORT is responsible for the mobile app and client software log-in. • HTTP PORT is responsible for Web browser log-in. • RTSP PORT is responsible for video/audio streaming. NOTE: 8 The HTTP port, server port, and RTSP can be changed to avoid conflicts with the ISP or if multiple devices are installed at a single location.
PAGE 8
SET UP HIK-CONNECT P2P CLOUD SERVICE (continued) 3. To see a device’s video stream on the Hik-Connect mobile app or iVMS-4500 mobile app, you must add the device. 1) Login to Hik-Connect mobile app with your user name, e-mail, or mobile number and password. 2) On the Home screen, click the “+” button (upper right corner). 3) Enter the device’s information.  If you have the device’s QR Code: Use the QR Code Scanner to scan the device’s QR Code.
PAGE 9
ADD IP CAMERAS (continued)  Hikvision Camera Connected to Network but Not Unit’s PoE Port (Cameras 17 – 32) — Will automatically be detected and displayed at bottom of camera list in yellow. Add to NVR camera channel manually: - To Add All Cameras – Click the One Touch Adding button. - To Add Select Cameras – Click the + sign next to each camera you wish to add, then enter the camera’s IP address and password.
PAGE 10
VIEW LIVE VIDEO Live View displays real-time video. Icons in the upper right of screen show each camera’s record and alarm status.
PAGE 11
SET UP RECORDING (continued)  Motion Detection Areas To define the image areas that Motion Detection will monitor for each camera, do the following: 1. Go to MENU > RECORDING CONFIGURATION > MOTION DETECT. 2. Use Camera pull-down menu to select camera to configure. 3. Check the Enable Motion Detection checkbox to enable motion detection. 4. Use the Sensitivity boxes to select how responsive the detection should be (the more green boxes lit, the greater the sensitivity). 5.
PAGE 12
11 SET UP RECORDING (continued) IP Cameras       MAIN STREAM Select tab  CAMERA Select IP camera  EVENT For event recording only (motion or alarm) CONTINUOUS For live view image and continuous recording VIDEO QUALITY Selectnumber of green squares to set quality (in example, sensitivity is set to 3) - Max Bitrate (kbps) is the chosen bitrate for streaming the video. Max Bitrate should be adjusted to meet or exceed the rate recommended by the system for the chosen parameters.
PAGE 13
12 PLAY BACK RECORDED VIDEO 1. Go to MENU > PLAYBACK. 2. Select the desired camera(s) from the menu on the right of the screen. 3. Select the desired date (days that contain recordings will be blue if recording was continuous only or yellow if all or part of the day was event recording). 4. Press PLAY. 5. Click within the timeline to jump to desired time.
PAGE 14
13 BACK UP VIDEO RECORDINGS AND CLIPS Back up recorded video clips to ensure important video is not lost or destroyed.  Choose Recorded Video Clips To Back Up 1. Connect a USB flash drive, HDD, or DVD writer to an available USB port (this step is mandatory). 2. Go to MENU > PLAYBACK. 3. Select cameras for playback. 4. Select the date and beginning time of the incident. 5. Click START CLIPPING button. 6. Select the ending time of the incident. 7.
PAGE 15
13 BACK UP VIDEO RECORDINGS AND CLIPS (continued) 6. Choose backup device (USB flash drive, USB HDD, or DVD writer). 7. Click Export (to check backup, choose recorded file in Export interface and click button).
PAGE 16
Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1 Telephone: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690 E-Mail: sales.usa@hikvision.com • www.hikvision.com © 2017-2019 Hikvision USA Inc. • All Rights Reserved Specifications subject to change without notice.