TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection Index 1. 2. 3. 4. Adding DS112j to DS-2CD2112-I5 via NFS Mount Type ................................................................................ 4 Notes of using NFS mount type on DS112j ................................................................................................... 7 Adding DS112j to DS-2CD2112-I5 via CIFS Mount Type ...............................................................................
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection About this Document This manual applies to the following devices and Hikvision IP camera DS-2CD2211-I5 and Synology NAS DS112j are used as examples in it. Smart Pro Value [1] Series DS-2CD4xxx Hikvision IP Camera Synology NAS Platform Firmware Version Model Number R1 V5.1.0 131202 or above DS-2CD63xx[1] R4 DS-2CD7xx/8xx/72xx/82xx DM365 V5.0.9 140305 or above V5.1.0 131202 or above DS-2CD6412FWD-10/20 R1 V5.1.
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection 1. Adding DS112j to DS-2CD2112-I5 via NFS Mount Type Main Steps: 1. Log in the web page of the DS112j. The IP address of DS112j in US office is http://10.102.103.206:5000 and user name/password is admin/12345. 2. Click Control Panel, and in the pop-up message box, click File Services. Under Win/Mac/NFS tab, enable the NFS by tick the box in front of Enable NFS and click Apply to save the settings. 3.
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection 4. Then go to NFS Permissions tab and click Create button. In pop-up message box, enter the IP address. In this case, my IP address is 10.102.103.x, so I entered 10.102.103.0/24 (Note: /24 means that the subnet mask is 255.255.255.0). And then all the IP cameras in this segment can be mounted on this directory. Please also select No mapping for Squash option. Click OK to save the settings. 5.
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection 6. Add NAS to an IP camera: Go to web client of DS-2CD2112-I5 and select NFS as the mounting type and input the server address and file path, then click save. Note: NFS mounting type does not require user name and password. 7. Go back to Storage Management, tick the checkbox of the HDD No. and click Format. After it is formatted, the NAS can be used for recording.
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection 2. Notes of using NFS mount type on DS112j 1. DS112j only supports adding one HDD so it does not support disk group management as shown in the figure below. 2. DS112j only supports creating one volume (as shown in the figure below) and a volume can only be attached to one IP camera when using NFS mount type. There might be confliction that causes HDD error and video loss if a volume is attached to more than one IP camera. 3.
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection 5. NFS mount type does not require user name/password when it is attached to an IP camera, so there is no need to create user on the Synology NAS as well. 6. When assign the NFS permission for NFS mount type, please select No mapping for Squash option as shown in the figure below. 7. When using NFS mount type, the file path format filled in an IP camera is /volume id/name of shared folder.
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection 3. Adding DS112j to DS-2CD2112-I5 via CIFS Mount Type Main Steps: 1. Log in the web page of the DS112j. The IP address of DS112j in US office is http://10.102.103.206:5000 and user name/password is admin/12345. 2. Create a Shared Folder: Click Control Panel, and in the pop-up message box, click Shared Folder. Input the name of the new folder and click OK. In this case, we named it “TestCIFS” under General tab and click OK.
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection 4. Then go to User groups tab and select users by ticking the box on the right side. Click OK to go to next step. 5. Go to Permissions and assign the Read/Write permission of TestCIFS folder to the newly added user – ipc_test and click OK.
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection 6. In the following interface, you can configure the upper limit of the storage space. Quota control is only valid when using CIFS protocol and quota size cannot be zero or empty (For NFS protocol, it is invalid). In this case, we tick the checkbox of Enable Quota, and enter the number 200, then the user ipc_test is able to use 200G space on the volume 1.
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection 12
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection 4. Notes of using CIFS mount type on DS112j: 1. DS112j only supports adding one HDD so it does not support disk group management as shown in the figure below. 2. DS112j only supports creating one volume (as shown in the figure below). If you want to attach more than one IP camera to a volume, please create multiple shared folders and users on DS112j.
TM Quick Start Guide of Hikvision IP Camera & Synology NAS Connection the IP camera before use it again. 5. CIFS mount type requires user name/password when it is attached to an IP camera, so you need to create a user on the Synology NAS. 6. When using CIFS mount type, the file path format filled in an IP camera is /name of shared folder. For example, if the name of shared folder is TestCIFS, the file path is /TestCIFS.