WIRELESS DIGITAL NETWORK DOOR-PHONE SYSTEM Installation and Operation Manual (P2019TC3) (R118-1)
Describe Product Views The products is HD, Wi-Fi network doorbell, has the function of PIR, the bell, TF card storage function, cloud storage function; 433MHz transmitter module, with Ding Dong doorbell,AC/DC 8V-24V power supply, built-in lithium polymer battery, 3.7V/5000mAH, rechargeable, with infrared night light, two-way intercom, with Visitdoor APP and mobile phone use.
Software Installation. 1. Open the App Store (iOS) or Google Play (Android) on your mobile device. Then search for and install the "visitdoor" APP 2. Or two dimensional bar code scanning Iphone Android After the installation of mobile phone will appear in the " Icon, then click the icon " 3. Click the YES 4. Click the Set 5. Click the Set individual permissions 6.
Android device connected to the network OFF ON 5. Keep on press the call button about 5 seconds , the LED turn to fast flashes. 1. Powered on 6. Click the Next 2.Click the "visitdoor" APP, click the "+" icon 4.Click AP Matching. 3. Click the Search 5 7. Enter WiFi password and click Next (only to 2.4G WiFi) 8.
Apple device connected to the network OFF ON 9. Enter The default password: admin 10.click done。 1. Powered on 2.Click the "visitdoor" APP, click on the "+" icon 11.add is successful NOTICE : in order to ensure the security and privacy of users, the user must change password the first time .(see page 12) 7 4.Click AP Matching. 3.
5. Keep on press the call button about 5 seconds , the LED turn to fast flashes. 6.enter the phone settings ,Click the WiFi settings, 10.click "visitdoor" APP, 9.Click the "HOME" button to return your mobile desktop. sdao xinxin zs 310 7.select "Vistdoor-AP" and connect, 8.Until the connection is successful. 11. Click the Next 12. Select the WiFi that you want to link to(only to 2.
APP Setting Change the old password: admin NOTICE : in order to ensure the security and privacy of users, the user must change password the first time please. 13. Enter WIFI password and click OK 14. connecting Device 1. Under the monitor or intercom state , click the set icon. 15. Enter The default password: admin 2. click the Modify Password 16.add is successful NOTICE : in order to ensure the security and privacy of users, the user must change password the first time .(see page 12) 11 3.
Cloud storage (save for one week) Enable/disable Push notification click edit icon enter the set interface Click the cloud storage icon to enter the storage folder. Enable/disable Voice Notice Enable/disable Vibrate Notice (Apple phone does not have this option) Select Push Sound View APP version Push notification: select a folder and click it When enabled, the app will send "real time" alerts to your mobile device when ever motion is detected by any of your outdoor.
Quick View How to pair doorbell When the phone is turned off or not used, offers a wireless doorbell to make sure you will not miss the visitor's . 1 4 5 2 3 View files based on dates 4. Pair button 5. Battery box 1. Work Indicate LED 2. set ring volume 3. set bell tone sort 120m(Min) It can be sorted by four ways: Time Picked, Missed and infrared alarm Doorbell Outdoor-phone Pair : 1. Under the standby statue press the pair button. 2. Press the call button. 3.
2. Intercom: Operating when someone ring ,Slide to the visitors. 1. Call: icon to taking with When a visitor presses the call button of outdoor-panel, the LED will be flash with calling reminder sound . mobile devices will be ring activate the screen.(Iphone need to click the push information, to enter the call interface), It will take three photoes, The photo stored in the TF card and cloud storage.
3. Monitor: the "monitor" function is not available when Intercom: Click the icon to turn on the hands-free function (the function in the factory is set as the default), slide the icon to right and hold, it can talk to visitor, Release it to hear. click the icon again to turn off the hands-free, switch to the receiver mode, then can realize duplex intercom, The intercom time is 120 seconds. power supply by battery.
4. Delete or Modify visitdoor 5. Device Setting Under the monitor or intercom state , click the set icon. Click the set icon click edit icon Modify the name Modify the password (Only used to change the wrong password when adding the device) Delete the Device 21 5.1 Change Password 5.2 Upgrade Firmware 5.3 View Records 5.4 View Photo 5.5 View Video 5.6 TF Card rewrite Setting 5.7 Luck Setting 5.8 PIR setting 5.
5.1 Change password: The Change Password option allows you to change the door default password (old password: admin) Quick View:(need insert TF card, Otherwise, there is no option) old password: admin NOTICE : in order to ensure the security and privacy of users, the user must change password the first time please. View files based on dates 5.2 Upgrade Firmware: users can upgrade the latest version. sort It can be sorted by four ways: Time ,Picked, Missed and 5.
5.4 View photo(phone): 5.5 View Video(phone): select a folder and click it the folder based on date. select a file and click it. Delete photo(phone): click edit icon ,enter the delete video menu select a folder and click it the folder based on date. select a file and click it.
5.6 TF card rewrite setting: (need to insert TF card, Otherwise, there is no option) Enable /disable rewrite when the TF card full. 5.7 Luck setting:(needs to customized) To setting number of luck. Add new Visitdoor device When the device has been connected to the Internet, if there are new users need to add, you can use the following three methods: Search, QR scanning, manual input. The default password: admin 5.
2. QR code scaning 1. LAN Search HWA0V0-000020-QPJTFJ-AHVG2M 1. Select search and click it 2. Select LAN Search and click it 4. Enter initial password: admin. 3. Click the device 29 1. Select QR Scan 2. Scan the QR code The lable on the unit 3.
3. Manual input Installation Select manual input Input the system name of you want Input the DID The default password: admin When mounting the outdoor panel, ensure that it is located in dry place. It is important that the camera or the electronics do not get wet. The camera should ideally be mounted at a height of between 1.45-1.50 meters. Press to Submit Notice: Before installation, check that the power switch is on.
FCC STATMENT Specifications FCC STATEMENT Outdoor-phone 433 Operating Frequency 433.92MHz 433 Unobstructed Effective Range 120m(Min.) WIFI Operating Frequency 2.4GHz Operating Temperature -10℃~ +50℃/ +14℉~+122℉ Storage Temperature 20℃~ +60℃/+14℉~+140℉ Operating Humidity ≤85%RH Imaging Sensor Type CMOS View Angle level: about 100°vertical:about 70° Supply Voltage AC 8V~ 24V 3.