Thank you very much far chasing ANNE. Our products are supported by the world's first video monitoring manufacturers, and they have adopted military elev! of protection. It is our top priority fo ensure your data safety and offer you a satisfactory service.
About this Manual This Manual is apy ie to Network Video Recorder (NV, The Manual includes instructions for using and managing the predict, Pictures, charts, images and all other information hereinafter are for description and explanation only, The information contained in the Anus! is subject to change, without notice, due to firmware updates or other reasons. Please find the Latest version in the company website . Please use this user manual under the guidance of professionals.
® 2006/66/EC {battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union, Sse the predict documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, rectum the battery to your supplier or to designated collection point. For more information ses: www.
Table of Contents TIER LIPOSUCTION ERY PARRY mmo 1 1.2 Errs Panel -1.3 Hard Disk IS@HBHONNVR Installation 1.5 HDD Storage Calculation Chart o-u oom § Chapter 2 Operation. 2.1 Menu Structure 2.2 Activating Your 2.3 Setting unlock Pare N —8 24 Using te Setup WEB 3 2.5 Logins 0d LOGE Camera Management TEABAG Aig TB CHEERS. ~~ nom 14 2.9 Live View -2.40 RECOILING Searching omen 17 BEE PIGGYBACK 212 Backup. 2.13 Setting Motion Detection Alan-21 214 Setting Email La EE cee 25 3.
Chapter 1 Introduction 1.1 Front Panel Na. Name Description Power Power indicator turns yellow when system is running. Status Status Indicator Status indicator boinks red when tads is being read from or written to HDD. Terr Outfox indicator boinks yellow when network connection Is Sanctioning properly. ~ USB Interface Universal Serial Bus (USB) parts for additional devices such as USB mouse and USE Herd Disk Drive (HDD).
1.2 Rear Panel The rear pane! are various according to different models, prey Nii Filly Tors Description 1 | Power Supply 48Y DIC power supply or AC 100~240V 2 Audion RCA connector for audio input. 3 | HOMO Interface HDMI video output connector. 4 {LAN Network Interface | 1 10 7100 71000 Bps serif-adsptive Ethernet interface 5_| Audio Out RCA connector for audio output, 5 VGA Interface DBL connector for VGA output. Display local video output and menu.
2 Find out the power cable and data cable of the hard disk from the NVR accessories box, and prepare a hard disk and the hard disk screw, See in the picture on the left hand side, three-color power cable is on the left and the bite data cable is on the right. connect one end of the power cable to the motherboard of NVR.
5.Connect Bue date cable and the power cable to the HOD. G. Flace the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD. the cover of the NVR and fasten screws. 1.
The interface may be different between different models and different software versions, 2.2 Activating Your Device For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation, You can lase activate the device via Web Browser, PADS or Client Software. Steps: Input the same password in the text field of Create New Password, Confirm Rew Password and IP Camera Activation Password.
Strong Password recommended We highly recommend you rate a strong password of your own choosing {using a minimum of & characters, including upper case letters, lower case A {setters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regular, especially in the high security system, resetting the password monthly or weekly can better protect your product. 2.
Then you can choose system language you need . 2.4 Using the Setup Wizard After setting the language, you will come to the setup wizard Interface. The Setup Wizard can walk you through some important settings of the device.
Mat to continue the setup wizard and enter the signal input configuration interface. 2. Configure the IP Address, If you want to monitor remotely, you need ta connect your DVR to the Internet first, and the IP address and DNS server must be comely obtained. 3.8et the PZP function. You need to manually enter 8 verification code first, which consists digits or letters, snd then contain it (ABRADE is not slowed).
4 Set the HOD. The newly installed hard disk needs fa matting before it could be used. Choose the target HDD and click "int" to format it, then the status will show "Normal", 5. Fotiow the guide of the Wizard to configure other settings. Note: Picture is for reference only, please consist with the real products, 2.5 Login and Logout User Login You have to log in to the device before operating the menu and other functions.
SB yrs mT (HC l08 Note: If you don't want to input password every time, you can disable the password, Go to Men > Configuration > General> Enable Password and choose disable, as shown in the figure below. 2.6 Network Settings Network settings must be properly configured before you operate NVR over network. Make sure that the NVR has connected to the router by using the network cable and your network at home is in good condition.
Select the General tab. 21n the General Settings interface, you can configure the following settings: NIC Type, [Pv Address, Pus Gateway, MTU and DNS Server, ¥ the SHIP server is available, you can check the checkbox of HEP to automatically obtain an IP address and other network settings from that server. 3.4fcer having configured the general settings, click the Apply button to save the settings. 4.
Sa tn nr GSE 5 i 2.8 Adding IP Cameras Before you can get a five view or record of the dives, you should add the network cameras to the connection list of the device, Ensure the network connection is valid and somerset, and the IP camera to add has already been activated. Please refer to the User Manual for activating the inactive IP camera. Steps: 1. Select the Add IP Camera option from the right-click menu in live view mode or dick Menu» Camera» Ca mere to enter the IP camera management interface.
2. The online cameras with same network segment will be detected and displayed in the camera list, 3, NVR will automatically assigned IP address to IP cameras. Jf IF camera support same protocol as NVR { default protocol is IPECAC, the camera will be added automatically, 4,1F IP camera support other protocol, kt need add manually. For example, thees is an IP camera supper ON VIE, it's IP address is 192.168.0.47, we choose to use 08 channel to add it.
Explanation of the icons Explanation Ion | Explanation Edit basic parameters of the cameos Add the detected IF camera, The camera is disconnected; you can click the icon to get the Bettie the IP camera exception information of camera. Play the live video of the connected " carers, Advanced settings of the camera. Show the security status of the camera to be active/inactive or the password strength {strong/medium Fovealrisk) Upgrade the connected IP camera. | Security 2.
2.10 Recording Settings NVR can set the continuous recording or motion detection video by one-click, and also set the recording schedule to record, Make sure that the disk has already been installed before you start. If not, please Install a disk and initialize it Make sure the status of HDD shows “Normal” Purpose: Two Kinds of record types are introduced in the following section, including Instant Record snd All-day Record.
Different recording types are marked! in different color icons. [Continuous] : scheduled recording. Levant] : recording triggered by all event triggered alarm. Edition] : recording triggered by motion detection. Alarm] : recording triggered by alarm, £82741 recording triggered by either mason detection or slammer, E8a&Al : recording triggered by motion detection and alarm. 1. Chasse the camera you want to configure in the Camera drop-down list. 2. heck the checkbox of Enable Schedule.
2.11 Playback The recorded video files on the hard disk can be played back in the following modes: instar playback, ll-ghay playback for the specified channel, and playback by narmai/event/smart/ five search. Playing Buck bry Nero! Search Steps: 1 Enter playback interface. Click Menu Playback oF select Playback from the right-click menu 2.Check the checkbox of channel(s) in the channel! list and then double-click to select a date on the calendar.
Detailed Explanation of Playback Toolbar Button | Cooperstown Button | Operation Button | Operation 8 disunion muse | [El start/stop cupping | [ll | 30s forward 30s reverse & Add default tag B® Add customized tag Pause reverse play/ El | micromanagement | [| | Speed down fii i Gre pl reverse pay Pause play/ Play/ Scaling up/down BE | ge tome pny the time line EB | sere Ei previous Next day Fail Screen Bit BE | sop Digital Zoom HF] Save the dips FE | process bar LET | Video type indicates the start ire and e
Re, OSE DIR 00 Soc 215A 3.Export the video files. 2.13 Setting Motion Detection Alarm Steps: L You can go to Menu> Camera> Motion Detection enter into the interface of Camera Management and choose a camera you want to set up motion detection. 2.5¢t detection area and sensitize Check checkbox to enable motion detection, use the mouse to draw detection areas} snd drag the sensitivity bar to set sensitivity, And then click [0] to set alarm response actions.
3. Ciick Trigger Chanel 1ab and select one or more channels which will start to record or become few-screen monitoring when motion alarm is triggered. 4.Set arming schedule of the channel.
to Mini i Ae me Sue sin ny nie sine San Rem « 5.Click Linkage Action tab to set up alarm response actions of motion lama. _236. If you want to set motion detection for another channel, repeat the above steps.
2.14 Setting Email Before configuring the Email settings, the NVR must be connected to a local area network (LAN) that maintains an SMUT mail server. The network must also be connected to dither an intranet or the Interment depending on the location of the e-mail accounts te which you want lo send notification. Soaps: You can go to Menu > Configuration » Network » General enter into the interface of Network Settings. 1.
3.Configure the following Email settings and click Apply button to save the settings, {Enable Server Authorization] (optional): Check the checkbox to enable the server authentication feature. User Name]: The user account of sender's Email for SMUT server authentication, {WordPress: The password of sender's Email for SMUT server authentication. [SMUT Server]: The SMUT Server IP address or host mans (e.g.smipgmsil.com). {SMUT Port No.j: The SMUT port.
. . Babylonian es dha Anesthetist smite visit . iris i .
aseiect™ {2h ~oreidcthe icon [IE in the upper right comer to add a device. You can ato scan the QR code at the better of the device to add or go to “Menu” “Configuration” -» “Network” interface to get the QR code. SH 3. Select the device to get real-time preview, cock the icon * BE in the upper right caner to enter into the interface of Function, you can payback, change settings and offer functions. click *More” to check more information.
Barbara Ha bis FG AE inn Riel NOTE: For your security, an SN can only be added by one account, But an account can be used on multiple motile phones.
3.2 Accessing by IE ‘When you are at home or the device only works within LAN, you can login on EE browser through device's 1 address. You can find the IP address of the device by PADS or just go to DVR's Main Menu > Configuration > Network > Genaro. You can find the PADS software from our website: www.annke Taps: Lun the PADS software to search online devices, then double click IP address to web browser Or just input it incs welt browses if you know the IP address. 2.
3.3 Accessing by client You can view the live video and manage the camera with the client software Guarding Vision. Passe download it from our official website Please follow the installation prompts to install the software, The control pane! and five view interface of Guarding Vileness are shown below.
a Steps: L Activate devices H your device have been activated you can go to Step 2 directly. Go to Control Panel-Device Management, on the bottom of the screen in the Online Devices section the screen will display ali devices on the network, The “Security” will display whether the DYR/NVR is active of not.
3. Line wine Go to Contra! Panel—Main View, you can choose view screen, 84 channel in one screen maximum, and if you have added IPC, you can get 2 live view in the screen, as shown in the figure below. Rie For more information, please pass F1 to get user manual. Chapter 4 Software Download and FAQ 4.1 Software Download Download software farm our website: center or contact for help. 4.
can use the three preset security questions or use the GOOD files to set a new password and reactivate the device. {3)IF you forget the answers for the questions and don't have GOOD files, please use PADS to export the configuration files to reset the password, download PADS from the CD or the website below. Too! cu and install it on your computer. Make sure your computer and your device are in the same network. b.
Click “Select Fonder” to save the device's key request file on your PC. The exported key request fle is a XML file which is named in the form of "Device Serial No.System Time". Mote: If your exporting fails, please right-click an PADS and run it as an administrator; Din Continent eas the file has a valid period, please send an email to immediately after exporting the file, and let us know that you have forgotten the password.
A.What should 1 do when NVR shows no pictures in single or multiple cambers chassis? Please make sure NVR, power supplies, cables, cameras and any part or parts is damaged or not may result in NYR shows no picture. Firebase use the replacement method to check which part is the cause of the problem: {1}. Please check aii parts of the connection, whether it is noose or poor contact caused by no picture; (2). Please replace the caner io see if the pickers can be displayed; (2).