Installation Instructions

ATTACH WIRELESS
CHARGING HEAD
NOTE.
Use supplied
35mm screw
CABLE CLEARANCE
When installing your Wireless Charging Head
ensure the cable doesn’t interfere with any
aspects of the motorcycle
NOTE.
Motorcycle Handlebar Mount shown
as example. Mount not included
INST ALLATION
REMOVE EXISTING
MOUNTING HEAD
1. 2.
WHAT’S IN THE BOX
1x Quad Lock® Motorcycle Wireless Charging Head
1x 50cm and 1.5m USB-A to USB-C cable
1x SAE to USB-A Powerbox with Surge Protection
1x 20cm SAE to battery terminal cable
1x M5 35mm screw 5x Zip ties 1x Allen key
NOTE. We highly recommend installation be carried out by a qualified mechanic or technician
NOTE.
The location of your USB-A port may dier from shown
USB-A PORT
RECOMMENDED 5V/2A
50cm USB-A to USB-C CABLE
2. Power on
1.
WIRING OPTION 1 - FACTORY USB-A PORT
Ring Terminal to SAE connector
INPUT – USB-C
12-24V/DC
OUTPUT – USB-A
5V 2A
9V 2A
12V 1.5A
20cm
1. Attach to Mount
2. Connect Mount to battery
with cables provided
3. Power on
WIRING OPTION 2 - CONNECT WITH RING TERMINALS
ATTACHING YOUR PHONE
45°
1.
2.
2.
1.
DETACHING YOUR PHONE
ERROR MODE
FULL CHARGE
CHARGING
POWER ON
LED STATES
LOW INPUT POWER MODE <5W (5V
/
1A)
The phone may reach 100% charge but in some instances
it may take a long time for the cyan light to show.
WIRELESS CHARGER OVER HEATING
MOTORCYCLE
WIRELESS
CHARGING HEAD
QUADLOCKCASE.COM
KEEP IN TOUCH
QUADLOCKCASE
@QUADLOCKCASE
@QUADLOCKCASE
SAE connector to USB-A Powerbox
0.5M or 1.5m USB-A to USB-C CABLE