ANNE PRO 2 UserManual V1.
ANNE PRO 2 UserManual V1.1 ANNE PRO 2 1. Connect 1.1 Connect over USB Cable 1.2 Connect over Bluetooth 2. Basic Function 2.1 F1~ F12 2.2 Direction Keys 2.3 Other Keys 2.4 TAP Layout 2.5 Magic Fn 3. Light Control 4. Setup bluetooth 4.1 Turn on Bluetooth broadcast 4.2 Switch Host 4.3 Bluetooth pairing with Windows 8/10 4.3.1 Check if your computer supports BLE 4.3.2 Pair with keyboard 4.4 Bluetooth pairing with Mac OS X 5. Technical Parameters ObinsLab Starter 1. Getting Started 1.1 Supported Platforms 1.
ANNE PRO 2 ANNE PRO 2 is a 60% size bluetooth RGB mechanical keyboard, it’s smart and save the space of the desk. Although it only have 61 keys, it can used like a stand 104 keys keyboard by key combination. 1. Connect 1.1 Connect over USB Cable Connect Steps: 1. Turn off the Bluetooth switch on the back of the keyboard 2. Connect your computer with a USB cable 1.2 Connect over Bluetooth 1. Turn on the Bluetooth switch on the back of the keyboard 2.
2. Basic Function 2.
2.
2.3 Other Keys FN1 + O = SCROOL LOCK FN1 + P = PAUSE BREAK FN1 + \| = PRINT SCREEN FN1 + :; = PAGE UP FN1 + '" = PAGE DOWN FN1 + .
2.4 TAP Layout For default, ANNE PRO 2 turn the Tap Layout on, and set Right Shift for ↑ , FN1 for ← , FN2 for ! and Righ Control for " . So for example, when click Right Shift alone, the function will be ↑ . You can completely customize your TAP Layout, or turn it off . Setup guide, please refer to Layout Setting 2.5 Magic Fn Magic Fn can been the copy of FN1 or FN2. By default, Magic Fn is off. To enable it, please refer to the guide of Obinslab Starter at chapter 2.
3. Light Control ANNE PRO 2 presets a variety of lighting effects.
4. Setup bluetooth Before starting the next steps below, please confirm that the Bluetooth switch is at position On. Detail about turn on the Bluetooth switch, please refer to Chapter 1.2 4.1 Turn on Bluetooth broadcast Connect ANNE PRO 2 to a new host (Computer, Mobile, Pad etc), need Bluetooth pairing. To do this, need turn on Bluetooth broadcast first.
4.3 Bluetooth pairing with Windows 8/10 4.3.1 Check if your computer supports BLE If your computer does not support BLE, please purchase an adapter that supports BLE4.0. 1. Right click on the windows icon 2. Select Device Manager 3. If a MicroSoft Bluetooth Enumerator device is present, it means that the Bluetooth module supports BLE devices. If not, you need to purchase an adapter that supports BLE 4.0 4.3.2 Pair with keyboard 1. Right click on the windows icon, select menu Setting 2.
4.4 Bluetooth pairing with Mac OS X 1. Open Bluetooth setting window, click Pair button to pair with AnnePro2 2.
5. Technical Parameters Item Parameters Wired USB (Windows 7/8/10、Mac、Linux) Wireless Bluetooth LE 4.0 (Windows 8/10、Mac、Linux) Size 97 * 284 * 40mm Weight 635g Battery 1900mAh USB Input Voltage 5V DC USB Working Current 500mA Max Screw Torx T5 M2*9.
ObinsLab Starter Obinslab Starter is a PC tool for ANNE PRO 2 1. Getting Started 1.1 Supported Platforms System 32bit 64bit Windows 7 √ √ Windows 8 √ √ Windows 10 √ √ Mac OS X - √ Ubuntu - √ 1.2 Installation 1. Download the installation package: http://www.obins.net/occ/ 2. Install 1.3 Start Up The function of macro record need a special authorization, and some anti-virus software may block it, please choose trust it. Tips: Please always download Obinslab Starter from http://www.obins.
Windows Click the shortcut on the desktop Mac OS X The first time launch Obinslab Starter, you will see the alert below, please authorize Obinslab Starter by clicking Open System Preferences in the alert, then selecting the checkbox for Obinslab Starter in the Privacy pane.
2. Qick Guide 2.1 Device List 1. Device List Devices connected over USB cable. Click Hello World to refresh device list(This usually does not need). 2. Setting Switch Language Switch Theme Software update 3.
2.2 Keyboard Setting Information and general setting for the keyboard 1. Battery: Battery indicator 2. Running Time:Keyboard running time statistics 3. Layout Default: Default keyboard layout User: User customized keyboard layout 4. Tap Disable: Turn off keyboard TAP layout. Enable: Turn on keyboard TAP layout. 5. Magic Fn Disable: Turn off Magic Fn Fn1: Set Magic Fn to a copy of Fn1 Fn2: Set Magic Fn to a copy of Fn2 6. Macro Disable: Turn off Macro.
8. Reset Bluetooth: Clear Bluetooth bound info saved on keyboard.
2.3 Layout Setting 1. Layout Current: Layout read from keyboard. Qwerty, Mac, Dvorak: Preset layout. Click on icon + to add a new layout Right click on Current to Copy Right click on preset layout to Copy/Recover(set to default) Right click on user layout(added/copied) to Copy/Delete/Rename Double click on user layout to Rename(Enter for save, Esc for cancel) 2.
3. TOP The default layout, tap to trigger 4. FN1 Hold Fn1 to trigger 5. FN2 Hold Fn2 to trigger 6. TAP Usually set key code on modifier key to extend it. To use TAP, non't forget to enable TAP option at keyboard setting page 7. Download Download the selected layout to keyboard. If layout is seated to "Default", download a layout will rewrite it to "User" automatically ANNE PRO 2 have four layers, they are TOP、FN1、FN2、TAP.
2.4 Light Setting 1. Light Group Click on icon + to add light group Right click on custom light group item to Delete /Rename / Copy Right click on the Default light group to Copy / Recover(set to default) 2. Light List Click on icon + to add light effect(Limited to max 16) Click on light effect to Rename / Copy / Delete Right click on blank space to Paste the light effect copied Drag the light effect to sort 3.
7. Preview Preview the selected light effect on keyboard 8.
2.5 Macro Setting 1. Macro Group Click on icon + to add macro group Right click on macro group to Remane/Copy/Delete Double click on macro group to Rename 2. Macro Key Indicate the macro trigger position Click on a blank keycap to Paste/Add macro(Limited to max 16) Click on macro keycap to select a macro Right click on macro keycap to Delete/Copy/Paste Drag on the macro keycap and drop on a blank keycap to update macro trigger position 3.
3 Firmware Upgrade 3.1 ANNE PRO 2 In this page, you will get a list of firmware. For a better experience, we recommend upgrading to the latest. Upgrade to latest It's quite simple, just click the "Upgrade to Latest" button, what't all. Abnormal recovery If an accident(e.g. power failure, reboot, computer crash, and other unpredictable situations) occurs during the firmware upgrade, the keyboard can't be used. In this situation, you can use the abnormal recovery mode to recover the keyboard. 1.
Experimental Features 1. Turn option Upgrade Source to Development in the software setting page 2. Restart Obinslab Starter and check firmware list again 3.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.