Product Description

ManualsBrandsAnhui Inno-Sign International ManualsElectronicsBottle with wireless charging

Bottle with wireless charging

62140

Product description

1. Micro USB input

2. USB A charging port

3. Power bank indicator light

4. Wireless charging indicator

5. Switch on/off button

6. Wireless charging surface

Specifications:

Content product: 500 ml/16oz

Power bank capacity: 5.000 mAh/18.5Wh

Input/Output: 5V/2.0A and USB Output 5V/2.1A

Wireless charging: 5V/1A, 5W

Material: 304 stainless steel inside & 201 stainless steel outside, PP lid, ABS bottom

How to use

To charge the power bank

Plug in the supplied cable to your wall charger or computer USB port. The USB connector goes to your

charger, the micro USB goes to your power bank.

 The power bank indicator light (3) will blink in red. When fully charged, the indicator will turn in

solid red indicator light.

Summary of content (4 pages)

PAGE 1
Bottle with wireless charging 62140 Product description 1. 2. 3. 4. 5. 6. Micro USB input USB A charging port Power bank indicator light Wireless charging indicator Switch on/off button Wireless charging surface Specifications: Content product: Power bank capacity: Input/Output: Wireless charging: Material: 500 ml/16oz 5.000 mAh/18.5Wh 5V/2.0A and USB Output 5V/2.
PAGE 2
  If fully depleted the power bank will take around 5 hours to charge fully When fully charged disconnect the power bank Check remaining battery power Press the switch button (5), the power bank indicator (3) will display the remaining battery power. If the battery power is sufficient, the indicator will display in solid blue for a few seconds. If the battery is low, the indicator light flashes in blue for a few seconds.
PAGE 3
Warning and caution wireless charging surface: - Some phone cases may block the wireless charging Do not place other materials, like metal objects, magnets and magnetic stripe cards, between the mobile device and the wireless charging surface When the mobile device is not placed on the charging surface accurately, your mobile device may not charge properly If you use the wireless charger in areas with weak coverage, you may lose your network reception Care instructions of the product: Please note: this it
PAGE 4
• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.