Disassembly Manual

ManualsBrandsAnhui Inno-Sign International ManualsElectronics10W Bamboo Phone Stand & Wireless Charger

Manual for disassembly of

bracket

wireless charging

Thank you for using

this product

Please read this manual

carefully before use to ensure

safe and correct use

Product Image:

Product parameters:

Enter: DC5V/2A|DC9V/1.67A

OutputDC9V/1A,7.5V/1A,5V/

Frequency Range: 110-205kHz

Wireless Power:Max 10W

Summary of content (6 pages)

PAGE 1
Manual for disassembly of bracket wireless charging Product Image: Thank you for using this product Please read this manual carefully before use to ensure safe and correct use Product parameters: Enter: DC5V/2A|DC9V/1.67A OutputDC9V/1A,7.
PAGE 2
How to： cross-stitch the ones and 1. twos in the picture; 2. Connect the MICROUSB properly connected and ready to use; 3. Place the device on a wireless charger and make sure cable to the MICROUSB port it is in a central position; on the wireless charger and 4. connect the other end of the the charger indicator lights up cable to the USB port or the blue; USBAC adapter (which uses Points to note: the QC3.0 or PD protocol adapter), with a red light indicating that the charger is 1.
PAGE 3
If you need to clean the device is placed on the wireless charger; make sure it is not charger; the FDO protection connected to the power supply. function is triggered, and the The ambient temperature for indicator light flickers, unable 2. 3. use is approximately 0-40oC. 4. . If your phone has a to work properly. 6.
PAGE 4
/ Certificate of \ / Conformity \ Production date Inspector NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 5
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
PAGE 6
This device complies with Part 15 Statements: of the FCC Rules. Operation is This equipment complies with subject to the following two FCC radiation exposure limits set conditions: forth for an uncontrolled (1) this device may not cause environment. This equipment harmful interference, and (2) this shall be installed and operated device must accept any with minimum distance 20cm interference received, including between the radiator & body. interference that may cause undesired operation.