User Manual

2 Install the Mi Fit app on your phone
小米運動
Charging your Mi Band
Charging Fully chargedLow battery
3
Pair Mi Band with your phone
Steps Heart rate
Use your Mi Band
Time
Technical Specs
Product Name: Mi Band 2
Product Model: XMSH04HM
Connection Type: Bluetooth 4.2 BLE
Operating Temperatures: 0℃～45℃
Adjustable Length: 155mm～210mm
Snap Materials:Aluminum Alloy
Device Requirements: Compatible with Mi phones and any device with Bluetooth
4.0 and Android 4.4 and above; Compatible with iPhone models 4s and above
that run on iOS 7.0 and above.
Battery Capacity: 70mAh
Battery: Lithium-Polymer
Weight: 7. 0g
Water Resistance: IP67
Strap Length:235mm
Strap Materials: TPE
User Guide
Pinch the snap to close Mi band
around your wrist
c
Insert the sensor into the strap
from above. With the metal
contact side entering first
b
Assemble and wear Mi Band1
Take the sensor and the strap
a
Mi Band sensor
Strap
Search for“Mi Fit”on the App Store/Google Play or scan the QR
code below to download and install the app
Open the Mi Fit app and follow the instructions to sign in with your
Mi Account. Use the app to search for your Mi Band. When the Mi
Band vibrates and receives notification on the display, press the
button to complete the pairing process.
After pairing, your Mi band will start to track and analyze your
movements and sleep patterns. Pressing the button will allow you to
check current time, track your steps and monitor heart rate.
Press the button to check the battery status. When battery is low,
please charge your Mi Band
Safety Notice
Do not attempt to force open the sensor. Substances contained in
this product and/or its battery may damage the environment and/or
human health if handled and disposed of improperly.
Do not attempt to disassemble your Mi Band.
Do not expose your Mi Band to extremely high or low temperatures.
Do not leave your Mi Band in direct sunlight for extended periods of time.
Do not use your Mi Band in a sauna or steam room.
Built-in Battery Precautions
Do not attempt to replace your Mi Band's battery or force open the
built-in battery.
Use only the off icial cable to charge your Mi Band.
Regulatory Notice
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference and;
2. This device must accept any interference, including inter ference
that may cause undesired operation of the device.
FCC ID: 2AC8UXMSH04HM
This device is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC.
Disposal and Recycling Information
The symbol signifies that this product has to be disposed
separately from ordinar y household wastes at its end of
life. Please kindly be aware that this is your responsibilit y to
dispose electronic equipment at recycling centers so as to
help conser ve natural resources.
XMSH04HM
Warranty
For warranty information, visit: ww w.mi.com.
Manufacturer: Anhui Huami Information Technology Co., Ltd.
Address: Rm 1201, Building A4, National Animation Industr y Base,
800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China
Regulatory Notice
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Regulatory Notice