User's Manual
米动
Download Mi Fit App
Bind wristband
1. Main unit
2. Wrist strap
3. Wireless charger base
4. User guide and three guarantees
Package Contents
Assembly
1. Metallic ring on the wrist strap
2. Bow-shaped wrist strap
Charging
Connect the charger base to the USB
connector charger, then remove the main
unit from the wrist strap and place it on the
charger base, with the unit's blank side
(without text) facing up. When the white
indicator light on the middle of the base
flashes, it indicates the unit is being
charged. The light will stop flashing when
charging is completed.
Open the metallic ring on the wrist strap
by pushing the button at the back of the
strap in the direction indicated by an
arrow.
Secure the metallic ring after placing the
main unit onto it.
Open Mi Fit on your mobile phone and
follow the instructions in the App to bind
the wristband
Scan the QR Code below or search for Mi
Fit and install it.
Ocial website: www.amaz t. com
Customer service line: 400-8850 - 820
Manufacturer: Anhui Huami Information nology Co., Ltd.
Address: Suite A41201 (National Animation Base)
No. 800 Wangjiang Road W.,Gaoxin District, Hefei
Regulatory Notice
This device c omplies with Par t 15 of the FCC
Rules. Operation is subject to the follow ing
two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interferenc e
received, including inter ference that may
cause undesired operation
Note: This p roduct has been tested and
found to c omply with the l imits for a Class B
digital devic e, pursuant to Part 15 of the
FCC Rules. These limits are de signed to
provide reasonable protection against
har m ful interference in a residential
installation. This product generate s, uses,
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause har mf ul
interference to radio c o mmunicat ions.
However, there is no guarantee that
interference will not occur in a particular
installation. If this product doe s cause
har m ful interference to radio or television
reception, which can be determined by
turning the equip ment of f and on, the use r is
encouraged to tr y to correct the interference
by one or more of the following measure s:
—Reor ie nt or relocate the re c eiving antenna.
—Increase the separation between the
equipment and receiver.
—Connect the equipment into an ou tlet on a
circ uit different from that to which the
receiver is connected.
—Consult t he dealer or an ex perienced
radio/ TV tec hnician for help.
Please take attention that c hanges or
modi f icat ion not expre ssly approved by the
par ty responsible for compliance could void
the user’s authority to operate the equipment
FCC ID: 2 AC 8UA15 01
This device is in compliance with
the essential requirements and
other relevant provisions of
Directive 1999/5/EC.
Basic information
Product name:
Amazfit Wristband
Amazfit hand ring model:
A1501(Black) / A1501(White)
Amazfit Bracelet wireless charging line model:
15 011
Main material:
Zirconium oxide ceramic
Battery capacity:
15mAh
Weight of main unit:
8.0g
Synchronization method:
Bluetooth 4.0
Water resistance rating:
IP68
Input voltage of wireless charger base:
5V DC
Input current of wireless charger base:
1.0A (Max)
OS support:
Android 4.4 or above;
and supports Android smart phones
equipped with bluetooth 4.0;
iPhone 4s or later models with iOS 7.0 or
above.
Disposal and Recycling Information
The symbol signifies that this
product has to be disposed
separately from ordinary
household wastes at its end of
life. Please kindly be aware that this is
your responsibility to dispose electronic
equipment at recycling center s so as to
help conserve natural resources.
U s e r G u ide