User Manual

ManualsBrandsANGELS HORN ManualsElectronicsVinyl Record Player, Turntables for Vinyl Records, Built-in Phono Preamp, Belt Drive 2-Speed, Adjustable Counterweight, AT-3600L (White Maple Wood)

Turntable Hi-Fi System

Model: HP-H002

Thank you for purchasing this AngelsHorn Turntable Hi-ﬁ System.

Read through this user manual before using the product to ensure its correct use. This

the instruction manual contains important information about safety, usage, and

disposal. Use the product as described and keep this manual for future reference.

This product can be used only in countries where the product is sold. Make sure that

the operating voltage and the plug of AC the adapter of the product are correct for the

country you live in.

Make sure that you have all the included items listed below before using this product.

If some items are missing or damaged, please contact our ofﬁcial customer service

email: info@angelshorn.com

After purchase, we suggest that you save all packaging materials for possible future

storage, moving, or shipping.

This turntable is supplied with a factory-ﬁtted and adjusted cartridge. The following

instructions for adjusting the cartridge are provided in case the cartridge is replaced

by a different model at a later date.

Introduction

Package contents

Turntable body

45 RPM adapter

- Instruction Manual

- Cartridge Alignment Protractor

- Counterweight

- Turntable Belt

- Anti-skating Weight

- Adaptor with the US-plug-end

Turntable mat Platter

- 1 -

Summary of content (8 pages)

PAGE 1
Introduction Thank you for purchasing this AngelsHorn Turntable Hi-ﬁ System. Read through this user manual before using the product to ensure its correct use. This the instruction manual contains important information about safety, usage, and disposal. Use the product as described and keep this manual for future reference. Turntable Hi-Fi System Model: HP-H002 This product can be used only in countries where the product is sold.
PAGE 2
Precautions Before Use Precautions Before Use Keep these instructions in mind Keep these instructions in mind 1. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools. 14.*Devices with class 1 construction should be connected to a mains socket outlet with a protective earthed connection. 2. Do not cover or block any venlaon openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device. 15.
PAGE 3
Precautions Before Use Product Description Keep these instructions in mind Part names and functions 29. Never place this apparatus on other electrical equipment. 30. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration. 1 31. Do not allow children access to plastic bags. 2 32. Only use attachments/accessories speciﬁed by the manufacturer. 3 4 5 6 33. Refer all servicing to qualiﬁed service personnel.
PAGE 4
Product Description Installation Technical Speciﬁcations - Unpack all parts and remove protective material. - Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made. Nominal Speeds 33 1/3 & 45RPM Speed Variance ±1% Wow and Flutter ≤0.15% Signal to Noise 55dB 1-Installing the Lid Down force Range 3.0-6.0g Install the Lid carefully over the hinge prongs Effective Tonearm Length 8.6” (218.5mm) Overhang 0.
PAGE 5
Installation Installation 3-Cartridge tracking force adjustment 3-Cartridge tracking force adjustment The counterweight supplied is suitable for cartridges weighing between 3.0-6.0g Rotate the counterweight counter clockwise (seen from the front) to adjust the down force according to the cartridge manufacturer’s recommendations.One mark on the scale represents 0.05g of down force.
PAGE 6
Installation Installation 5-Connection to the Ampliﬁer 7-Main Power Connection This turntable uses a moving magnetic cartridge. Set the PHONO & Line Out Switch on PHONO mode. The power adaptor is in the foam packing material. Unpack the power adaptor and plug the small end into the DC power jack located at the back side of the turntable. Plug the power adaptor into your power outlet. Connect the phono out cables to the phono input on your ampliﬁer of the pre-ampliﬁer (phono stage).
PAGE 7
Maintenance and Cleaning Cartridge Replacement Your turntable requires little of no regular maintenance. Remove dust with a slightly damp antistatic cloth. Never use a dry cloth, this will create static electricity and attract more dust! 6. Adjust the cartridge’s position to make sure it is precisely aligned on the headshell so that the stylus will be tracking the grooves in parallel perfectly.
PAGE 8
Troubleshooting Potential Incorrect Use and Fault Conditions： These turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included. Problem Solution - The unit is not connected to the main power supply.